Django Armstrong 1c2f7b5115 ath79: add support for Devolo WiFi Pro 1750e ... Hardware -------- CPU: Qualcomm Atheros QCA9558 RAM: 128M DDR2 FLASH: 16MiB ETH: 1x Atheros AR8035 (PoE in) 1x Atheros AR8033 WiFi2: QCA9558 3T3R (SiGE SE2565T 2.4 GHz power amp x3) WiFi5: QCA9880 3T3R (Skyworks 5003L1 5 GHz power amp x3) BTN: 1x Reset 1x WPS 1x USB eject LED: 1x LED blue 1x LED red BEEP: 1x GPIO attached piezo beeper UART: 3.3V GND TX RX (115200-N-8) (3.3V is pin closest to rear ports) Dupont 4 pin header Rear RJ45 serial port non-functional USB: 1x v2.0 Installation ------------ Make sure you set a password for the root user as prompted on first setup! 1. Upload OpenWRT sysupgrade image via SSH to the device. Use /tmp as the destination folder on the device. User is root, password previously set in the web interface. 2. Install OpenWRT with > sysupgrade -n -F /tmp/<openwrt-image-name> Signed-off-by: Django Armstrong <iamdjango@hotmail.com>		2019-01-26 21:46:33 +01:00
..
01_leds	ath79: fix case statement in 01_leds	2019-01-01 01:38:51 +01:00
02_network	ath79: add support for Devolo WiFi Pro 1750e	2019-01-26 21:46:33 +01:00
03_gpio_switches	ath79: add d-link dir-825-c1 and dir-835-a1	2018-12-17 00:21:34 +01:00