mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 14:13:16 +00:00
d16bd89c71
This solves issue with DDR training on Turris Omnia. Log: ******** DRAM initialization Failed (res 0x1) ******** DDR3 Training Sequence - FAILED ERROR ### Please RESET the board ### Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
99 lines
3.5 KiB
Diff
99 lines
3.5 KiB
Diff
From eadc4f512fb43bba2fa4e842c982da919da664be Mon Sep 17 00:00:00 2001
|
|
From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun@nic.cz>
|
|
Date: Tue, 4 Jan 2022 15:57:49 +0100
|
|
Subject: [PATCH] ddr: marvell: a38x: Fix Synchronous vs Asynchronous mode
|
|
determination
|
|
MIME-Version: 1.0
|
|
Content-Type: text/plain; charset=UTF-8
|
|
Content-Transfer-Encoding: 8bit
|
|
|
|
Before commit 4c289425752f ("mv_ddr: a38x: add support for ddr async
|
|
mode"), Asynchornous Mode was only used when the CPU Subsystem Clock
|
|
Options[4:0] field in the SAR1 register was set to value 0x13: CPU at
|
|
2 GHz and DDR at 933 MHz.
|
|
|
|
Then commit 4c289425752f ("mv_ddr: a38x: add support for ddr async
|
|
mode") added support for Asynchornous Modes with frequencies other than
|
|
933 MHz (but at least 467 MHz), but the code it added to check for
|
|
whether Asynchornous Mode should be used is wrong: it checks whether the
|
|
frequency setting in board DDR topology map is set to value other than
|
|
MV_DDR_FREQ_SAR.
|
|
|
|
Thus boards which define a specific value, greater than 400 MHz, for DDR
|
|
frequency in their board topology (e.g. Turris Omnia defines
|
|
MV_DDR_FREQ_800), are incorrectly put into Asynchornous Mode after that
|
|
commit.
|
|
|
|
The A38x Functional Specification, section 10.12 DRAM Clocking, says:
|
|
In Synchornous mode, the DRAM and CPU clocks are edge aligned and run
|
|
in 1:2 or 1:3 CPU to DRAM frequency ratios.
|
|
|
|
Change the check for whether Asynchornous Mode should be used according
|
|
to this explanation in Functional Specification.
|
|
|
|
Signed-off-by: Marek Behún <marek.behun@nic.cz>
|
|
Tested-by: Chris Packham <judge.packham@gmail.com>
|
|
Reviewed-by: Stefan Roese <sr@denx.de>
|
|
---
|
|
drivers/ddr/marvell/a38x/mv_ddr_plat.c | 19 ++++++++-----------
|
|
1 file changed, 8 insertions(+), 11 deletions(-)
|
|
|
|
--- a/drivers/ddr/marvell/a38x/mv_ddr_plat.c
|
|
+++ b/drivers/ddr/marvell/a38x/mv_ddr_plat.c
|
|
@@ -167,8 +167,6 @@ static u16 a38x_vco_freq_per_sar_ref_clk
|
|
};
|
|
|
|
|
|
-static u32 async_mode_at_tf;
|
|
-
|
|
static u32 dq_bit_map_2_phy_pin[] = {
|
|
1, 0, 2, 6, 9, 8, 3, 7, /* 0 */
|
|
8, 9, 1, 7, 2, 6, 3, 0, /* 1 */
|
|
@@ -734,7 +732,8 @@ static int ddr3_tip_a38x_set_divider(u8
|
|
u32 divider = 0;
|
|
u32 sar_val, ref_clk_satr;
|
|
u32 async_val;
|
|
- u32 freq = mv_ddr_freq_get(frequency);
|
|
+ u32 cpu_freq;
|
|
+ u32 ddr_freq = mv_ddr_freq_get(frequency);
|
|
|
|
if (if_id != 0) {
|
|
DEBUG_TRAINING_ACCESS(DEBUG_LEVEL_ERROR,
|
|
@@ -751,11 +750,14 @@ static int ddr3_tip_a38x_set_divider(u8
|
|
ref_clk_satr = reg_read(DEVICE_SAMPLE_AT_RESET2_REG);
|
|
if (((ref_clk_satr >> DEVICE_SAMPLE_AT_RESET2_REG_REFCLK_OFFSET) & 0x1) ==
|
|
DEVICE_SAMPLE_AT_RESET2_REG_REFCLK_25MHZ)
|
|
- divider = a38x_vco_freq_per_sar_ref_clk_25_mhz[sar_val] / freq;
|
|
+ cpu_freq = a38x_vco_freq_per_sar_ref_clk_25_mhz[sar_val];
|
|
else
|
|
- divider = a38x_vco_freq_per_sar_ref_clk_40_mhz[sar_val] / freq;
|
|
+ cpu_freq = a38x_vco_freq_per_sar_ref_clk_40_mhz[sar_val];
|
|
+
|
|
+ divider = cpu_freq / ddr_freq;
|
|
|
|
- if ((async_mode_at_tf == 1) && (freq > 400)) {
|
|
+ if (((cpu_freq % ddr_freq != 0) || (divider != 2 && divider != 3)) &&
|
|
+ (ddr_freq > 400)) {
|
|
/* Set async mode */
|
|
dunit_write(0x20220, 0x1000, 0x1000);
|
|
dunit_write(0xe42f4, 0x200, 0x200);
|
|
@@ -869,8 +871,6 @@ int ddr3_tip_ext_write(u32 dev_num, u32
|
|
|
|
int mv_ddr_early_init(void)
|
|
{
|
|
- struct mv_ddr_topology_map *tm = mv_ddr_topology_map_get();
|
|
-
|
|
/* FIXME: change this configuration per ddr type
|
|
* configure a380 and a390 to work with receiver odt timing
|
|
* the odt_config is defined:
|
|
@@ -882,9 +882,6 @@ int mv_ddr_early_init(void)
|
|
|
|
mv_ddr_sw_db_init(0, 0);
|
|
|
|
- if (tm->interface_params[0].memory_freq != MV_DDR_FREQ_SAR)
|
|
- async_mode_at_tf = 1;
|
|
-
|
|
return MV_OK;
|
|
}
|
|
|