mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 01:28:59 +00:00
c6ddf8d502
Many changes were done in drivers/pinctrl/bcm/pinctrl-bcm2835.c between
5.4.171 and 5.4.179.
The following 3 patches do not apply any more:
* target/linux/bcm27xx/patches-5.4/950-0316-pinctrl-bcm2835-Add-support-for-BCM2711-pull-up-func.patch
This was already integrated in kernel v5.4-rc1, it was never needed.
* target/linux/bcm27xx/patches-5.4/950-0328-Revert-pinctrl-bcm2835-Pass-irqchip-when-adding-gpio.patch
* target/linux/bcm27xx/patches-5.4/950-0362-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch
I think these were done to fix the problem which was really fixed in
commit 75278f1aff5e ("pinctrl: bcm2835: Change init order for gpio
hogs") from v5.4.175
target/linux/generic/backport-5.4/716-v5.5-net-sfp-move-fwnode-parsing-into-sfp-bus-layer.patch
Move fwnode_device_is_available to the same position as in kernel 5.10.
target/linux/layerscape/patches-5.4/302-dts-0083-arm64-ls1028a-qds-correct-bus-of-rtc.patch
Applied in commit 65816c1034769e714edb70f59a33bc5472d9e55f ("arm64: dts:
ls1028a-qds: move rtc node to the correct i2c bus")
Compile-tested: lantiq/xrx200, bcm27xx/bcm2710
Run-tested: lantiq/xrx200
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
247 lines
10 KiB
Diff
247 lines
10 KiB
Diff
From: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Date: Wed, 26 Feb 2020 10:23:41 +0000
|
|
Subject: [PATCH] net: phylink: propagate resolved link config via
|
|
mac_link_up()
|
|
|
|
Propagate the resolved link parameters via the mac_link_up() call for
|
|
MACs that do not automatically track their PCS state. We propagate the
|
|
link parameters via function arguments so that inappropriate members
|
|
of struct phylink_link_state can't be accessed, and creating a new
|
|
structure just for this adds needless complexity to the API.
|
|
|
|
Tested-by: Andre Przywara <andre.przywara@arm.com>
|
|
Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
|
|
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
|
|
--- a/Documentation/networking/sfp-phylink.rst
|
|
+++ b/Documentation/networking/sfp-phylink.rst
|
|
@@ -74,10 +74,13 @@ phylib to the sfp/phylink support. Plea
|
|
this documentation.
|
|
|
|
1. Optionally split the network driver's phylib update function into
|
|
- three parts dealing with link-down, link-up and reconfiguring the
|
|
- MAC settings. This can be done as a separate preparation commit.
|
|
+ two parts dealing with link-down and link-up. This can be done as
|
|
+ a separate preparation commit.
|
|
|
|
- An example of this preparation can be found in git commit fc548b991fb0.
|
|
+ An older example of this preparation can be found in git commit
|
|
+ fc548b991fb0, although this was splitting into three parts; the
|
|
+ link-up part now includes configuring the MAC for the link settings.
|
|
+ Please see :c:func:`mac_link_up` for more information on this.
|
|
|
|
2. Replace::
|
|
|
|
@@ -207,6 +210,14 @@ this documentation.
|
|
using. This is particularly important for in-band negotiation
|
|
methods such as 1000base-X and SGMII.
|
|
|
|
+ The :c:func:`mac_link_up` method is used to inform the MAC that the
|
|
+ link has come up. The call includes the negotiation mode and interface
|
|
+ for reference only. The finalised link parameters are also supplied
|
|
+ (speed, duplex and flow control/pause enablement settings) which
|
|
+ should be used to configure the MAC when the MAC and PCS are not
|
|
+ tightly integrated, or when the settings are not coming from in-band
|
|
+ negotiation.
|
|
+
|
|
The :c:func:`mac_config` method is used to update the MAC with the
|
|
requested state, and must avoid unnecessarily taking the link down
|
|
when making changes to the MAC configuration. This means the
|
|
--- a/drivers/net/ethernet/marvell/mvneta.c
|
|
+++ b/drivers/net/ethernet/marvell/mvneta.c
|
|
@@ -3655,9 +3655,11 @@ static void mvneta_mac_link_down(struct
|
|
mvneta_set_eee(pp, false);
|
|
}
|
|
|
|
-static void mvneta_mac_link_up(struct phylink_config *config, unsigned int mode,
|
|
- phy_interface_t interface,
|
|
- struct phy_device *phy)
|
|
+static void mvneta_mac_link_up(struct phylink_config *config,
|
|
+ struct phy_device *phy,
|
|
+ unsigned int mode, phy_interface_t interface,
|
|
+ int speed, int duplex,
|
|
+ bool tx_pause, bool rx_pause)
|
|
{
|
|
struct net_device *ndev = to_net_dev(config->dev);
|
|
struct mvneta_port *pp = netdev_priv(ndev);
|
|
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
|
|
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
|
|
@@ -58,8 +58,11 @@ static struct {
|
|
*/
|
|
static void mvpp2_mac_config(struct phylink_config *config, unsigned int mode,
|
|
const struct phylink_link_state *state);
|
|
-static void mvpp2_mac_link_up(struct phylink_config *config, unsigned int mode,
|
|
- phy_interface_t interface, struct phy_device *phy);
|
|
+static void mvpp2_mac_link_up(struct phylink_config *config,
|
|
+ struct phy_device *phy,
|
|
+ unsigned int mode, phy_interface_t interface,
|
|
+ int speed, int duplex,
|
|
+ bool tx_pause, bool rx_pause);
|
|
|
|
/* Queue modes */
|
|
#define MVPP2_QDIST_SINGLE_MODE 0
|
|
@@ -3468,8 +3471,9 @@ static void mvpp2_start_dev(struct mvpp2
|
|
.interface = port->phy_interface,
|
|
};
|
|
mvpp2_mac_config(&port->phylink_config, MLO_AN_INBAND, &state);
|
|
- mvpp2_mac_link_up(&port->phylink_config, MLO_AN_INBAND,
|
|
- port->phy_interface, NULL);
|
|
+ mvpp2_mac_link_up(&port->phylink_config, NULL,
|
|
+ MLO_AN_INBAND, port->phy_interface,
|
|
+ SPEED_UNKNOWN, DUPLEX_UNKNOWN, false, false);
|
|
}
|
|
|
|
netif_tx_start_all_queues(port->dev);
|
|
@@ -5125,8 +5129,11 @@ static void mvpp2_mac_config(struct phyl
|
|
mvpp2_port_enable(port);
|
|
}
|
|
|
|
-static void mvpp2_mac_link_up(struct phylink_config *config, unsigned int mode,
|
|
- phy_interface_t interface, struct phy_device *phy)
|
|
+static void mvpp2_mac_link_up(struct phylink_config *config,
|
|
+ struct phy_device *phy,
|
|
+ unsigned int mode, phy_interface_t interface,
|
|
+ int speed, int duplex,
|
|
+ bool tx_pause, bool rx_pause)
|
|
{
|
|
struct mvpp2_port *port = mvpp2_phylink_to_port(config);
|
|
u32 val;
|
|
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
|
|
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
|
|
@@ -449,9 +449,10 @@ static void mtk_mac_link_down(struct phy
|
|
mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id));
|
|
}
|
|
|
|
-static void mtk_mac_link_up(struct phylink_config *config, unsigned int mode,
|
|
- phy_interface_t interface,
|
|
- struct phy_device *phy)
|
|
+static void mtk_mac_link_up(struct phylink_config *config,
|
|
+ struct phy_device *phy,
|
|
+ unsigned int mode, phy_interface_t interface,
|
|
+ int speed, int duplex, bool tx_pause, bool rx_pause)
|
|
{
|
|
struct mtk_mac *mac = container_of(config, struct mtk_mac,
|
|
phylink_config);
|
|
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
|
|
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
|
|
@@ -925,8 +925,10 @@ static void stmmac_mac_link_down(struct
|
|
}
|
|
|
|
static void stmmac_mac_link_up(struct phylink_config *config,
|
|
+ struct phy_device *phy,
|
|
unsigned int mode, phy_interface_t interface,
|
|
- struct phy_device *phy)
|
|
+ int speed, int duplex,
|
|
+ bool tx_pause, bool rx_pause)
|
|
{
|
|
struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
|
|
|
|
--- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
|
|
+++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c
|
|
@@ -1501,9 +1501,10 @@ static void axienet_mac_link_down(struct
|
|
}
|
|
|
|
static void axienet_mac_link_up(struct phylink_config *config,
|
|
- unsigned int mode,
|
|
- phy_interface_t interface,
|
|
- struct phy_device *phy)
|
|
+ struct phy_device *phy,
|
|
+ unsigned int mode, phy_interface_t interface,
|
|
+ int speed, int duplex,
|
|
+ bool tx_pause, bool rx_pause)
|
|
{
|
|
/* nothing meaningful to do */
|
|
}
|
|
--- a/drivers/net/phy/phylink.c
|
|
+++ b/drivers/net/phy/phylink.c
|
|
@@ -447,8 +447,11 @@ static void phylink_mac_link_up(struct p
|
|
struct net_device *ndev = pl->netdev;
|
|
|
|
pl->cur_interface = link_state.interface;
|
|
- pl->ops->mac_link_up(pl->config, pl->cur_link_an_mode,
|
|
- pl->cur_interface, pl->phydev);
|
|
+ pl->ops->mac_link_up(pl->config, pl->phydev,
|
|
+ pl->cur_link_an_mode, pl->cur_interface,
|
|
+ link_state.speed, link_state.duplex,
|
|
+ !!(link_state.pause & MLO_PAUSE_TX),
|
|
+ !!(link_state.pause & MLO_PAUSE_RX));
|
|
|
|
if (ndev)
|
|
netif_carrier_on(ndev);
|
|
--- a/include/linux/phylink.h
|
|
+++ b/include/linux/phylink.h
|
|
@@ -91,9 +91,10 @@ struct phylink_mac_ops {
|
|
void (*mac_an_restart)(struct phylink_config *config);
|
|
void (*mac_link_down)(struct phylink_config *config, unsigned int mode,
|
|
phy_interface_t interface);
|
|
- void (*mac_link_up)(struct phylink_config *config, unsigned int mode,
|
|
- phy_interface_t interface,
|
|
- struct phy_device *phy);
|
|
+ void (*mac_link_up)(struct phylink_config *config,
|
|
+ struct phy_device *phy, unsigned int mode,
|
|
+ phy_interface_t interface, int speed, int duplex,
|
|
+ bool tx_pause, bool rx_pause);
|
|
};
|
|
|
|
#if 0 /* For kernel-doc purposes only. */
|
|
@@ -217,19 +218,34 @@ void mac_link_down(struct phylink_config
|
|
/**
|
|
* mac_link_up() - allow the link to come up
|
|
* @config: a pointer to a &struct phylink_config.
|
|
+ * @phy: any attached phy
|
|
* @mode: link autonegotiation mode
|
|
* @interface: link &typedef phy_interface_t mode
|
|
- * @phy: any attached phy
|
|
+ * @speed: link speed
|
|
+ * @duplex: link duplex
|
|
+ * @tx_pause: link transmit pause enablement status
|
|
+ * @rx_pause: link receive pause enablement status
|
|
+ *
|
|
+ * Configure the MAC for an established link.
|
|
+ *
|
|
+ * @speed, @duplex, @tx_pause and @rx_pause indicate the finalised link
|
|
+ * settings, and should be used to configure the MAC block appropriately
|
|
+ * where these settings are not automatically conveyed from the PCS block,
|
|
+ * or if in-band negotiation (as defined by phylink_autoneg_inband(@mode))
|
|
+ * is disabled.
|
|
+ *
|
|
+ * Note that when 802.3z in-band negotiation is in use, it is possible
|
|
+ * that the user wishes to override the pause settings, and this should
|
|
+ * be allowed when considering the implementation of this method.
|
|
*
|
|
- * If @mode is not an in-band negotiation mode (as defined by
|
|
- * phylink_autoneg_inband()), allow the link to come up. If @phy
|
|
- * is non-%NULL, configure Energy Efficient Ethernet by calling
|
|
+ * If in-band negotiation mode is disabled, allow the link to come up. If
|
|
+ * @phy is non-%NULL, configure Energy Efficient Ethernet by calling
|
|
* phy_init_eee() and perform appropriate MAC configuration for EEE.
|
|
* Interface type selection must be done in mac_config().
|
|
*/
|
|
-void mac_link_up(struct phylink_config *config, unsigned int mode,
|
|
- phy_interface_t interface,
|
|
- struct phy_device *phy);
|
|
+void mac_link_up(struct phylink_config *config, struct phy_device *phy,
|
|
+ unsigned int mode, phy_interface_t interface,
|
|
+ int speed, int duplex, bool tx_pause, bool rx_pause);
|
|
#endif
|
|
|
|
struct phylink *phylink_create(struct phylink_config *, struct fwnode_handle *,
|
|
--- a/net/dsa/port.c
|
|
+++ b/net/dsa/port.c
|
|
@@ -529,9 +529,11 @@ void dsa_port_phylink_mac_link_down(stru
|
|
EXPORT_SYMBOL_GPL(dsa_port_phylink_mac_link_down);
|
|
|
|
void dsa_port_phylink_mac_link_up(struct phylink_config *config,
|
|
+ struct phy_device *phydev,
|
|
unsigned int mode,
|
|
phy_interface_t interface,
|
|
- struct phy_device *phydev)
|
|
+ int speed, int duplex,
|
|
+ bool tx_pause, bool rx_pause)
|
|
{
|
|
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
|
|
struct dsa_switch *ds = dp->ds;
|