openwrt/target/linux/ramips/dts/mt7620a_iodata_wn-ac1167gr.dts
Adrian Schmutzler e4ce3109f2 ramips: simplify state_default/pinctrl0 in device DTS files
The node pinctrl0 is already set up in the SOC DTSI files, but
defined again as member of pinctrl in most of the device DTS(I)
files. This patch removes this redundancy for the entire ramips
target.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-12-23 02:24:55 +01:00

209 lines
3.3 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "iodata,wn-ac1167gr", "ralink,mt7620a-soc";
model = "I-O DATA WN-AC1167GR";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "wn-ac1167gr:green:power";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan2g {
label = "wn-ac1167gr:green:wlan2g";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
notification {
label = "wn-ac1167gr:green:notification";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
wlan5g {
label = "wn-ac1167gr:green:wlan5g";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
};
keys {
compatible = "gpio-keys";
wps {
label = "wps";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
auto {
label = "auto";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
};
};
&spi0 {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x8000>;
read-only;
};
iNIC_rf: partition@48000 {
label = "iNIC_rf";
reg = <0x48000 0x8000>;
read-only;
};
partition@50000 {
label = "NoUsed";
reg = <0x50000 0x20000>;
read-only;
};
partition@70000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x70000 0x6b4000>;
};
partition@724000 {
label = "manufacture";
reg = <0x724000 0x8c000>;
read-only;
};
partition@7b0000 {
label = "backup";
reg = <0x7b0000 0x10000>;
read-only;
};
partition@7c0000 {
label = "storage";
reg = <0x7c0000 0x40000>;
read-only;
};
};
};
};
&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &mdio_pins>;
mtd-mac-address = <&factory 0x4>;
port@5 {
status = "okay";
mediatek,fixed-link = <1000 1 1 1>;
phy-mode = "rgmii";
};
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
};
ethernet-phy@1 {
reg = <1>;
phy-mode = "rgmii";
};
ethernet-phy@2 {
reg = <2>;
phy-mode = "rgmii";
};
ethernet-phy@3 {
reg = <3>;
phy-mode = "rgmii";
};
ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
ethernet-phy@1f {
reg = <0x1f>;
phy-mode = "rgmii";
};
};
};
&state_default {
gpio {
ralink,group = "i2c", "uartf";
ralink,function = "gpio";
};
};
&pcie {
status = "okay";
};
&pcie0 {
wifi@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&iNIC_rf 0x0>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&wmac {
ralink,mtd-eeprom = <&factory 0x0>;
};