mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-19 03:06:35 +00:00
This repository is a mirror of https://git.openwrt.org/openwrt/openwrt.git It is for reference only and is not active for check-ins. We will continue to accept Pull Requests here. They will be merged via staging trees then into openwrt.git.
1ac627024d
According to many bugreports [0][1][2] the default ath10k-ct kernel module is unusable on devices with just 64 MiB RAM or with 128 MiB and dual ath10k cards. The target boards boot but eventually oom-killer starts to interfere with normal operation, so the current state is effectively broken. Since the two patches in question have a performance impact (and possibly some other unexpected side-effects) a dedicated build variant is added so that users of the low RAM devices can still benefit from all the ath10k-ct advantages. According to testing [3] results, the issue can be experienced even with "a 256MB device with three radios". Measured performance impact of implementing small buffers was lowering "the maximum 5 GHz throughput on an IPQ40xx device without RPS/XPS optimizations from 494/432 Mbit/s for TCP transfers (download/upload) to 438/343 Mbit/s" The patches were apparently inspired by QSDK tweaks used by ODMs for the affected devices. [0] http://lists.infradead.org/pipermail/openwrt-devel/2019-December/020573.html [1] https://github.com/openwrt/openwrt/pull/1077 [2] https://bugs.openwrt.org/index.php?do=details&task_id=2664 [3] https://github.com/freifunk-gluon/gluon/pull/1440#issue-195607701 Signed-off-by: Paul Fertser <fercerpav@gmail.com> [Remove double CONFIG_ATH10K-CT_LEDS entry] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> |
||
|---|---|---|
| .github | ||
| config | ||
| include | ||
| package | ||
| scripts | ||
| target | ||
| toolchain | ||
| tools | ||
| .gitattributes | ||
| .gitignore | ||
| BSDmakefile | ||
| Config.in | ||
| feeds.conf.default | ||
| LICENSE | ||
| Makefile | ||
| README | ||
| rules.mk | ||
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
This is the buildsystem for the OpenWrt Linux distribution.
To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.
You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.
1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default
2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/
3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.
4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.
Sunshine!
Your OpenWrt Community
http://www.openwrt.org