mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 18:47:06 +00:00
b98955c623
late_initcall_sync() is no longer needed so standard module functions can be used on all bmips PCI/PCIe drivers. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
404 lines
11 KiB
C
404 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* BCM6318 PCIe Controller Driver
|
|
*
|
|
* Copyright (C) 2020 Álvaro Fernández Rojas <noltari@gmail.com>
|
|
* Copyright (C) 2015 Jonas Gorski <jonas.gorski@gmail.com>
|
|
* Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_pci.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/types.h>
|
|
#include <linux/version.h>
|
|
#include <linux/vmalloc.h>
|
|
|
|
#include "../pci.h"
|
|
|
|
#define PCIE_BUS_BRIDGE 0
|
|
#define PCIE_BUS_DEVICE 1
|
|
|
|
#define PCIE_SPECIFIC_REG 0x188
|
|
#define SPECIFIC_ENDIAN_MODE_BAR1_SHIFT 0
|
|
#define SPECIFIC_ENDIAN_MODE_BAR1_MASK (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
|
|
#define SPECIFIC_ENDIAN_MODE_BAR2_SHIFT 2
|
|
#define SPECIFIC_ENDIAN_MODE_BAR2_MASK (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
|
|
#define SPECIFIC_ENDIAN_MODE_BAR3_SHIFT 4
|
|
#define SPECIFIC_ENDIAN_MODE_BAR3_MASK (0x3 << SPECIFIC_ENDIAN_MODE_BAR1_SHIFT)
|
|
#define SPECIFIC_ENDIAN_MODE_WORD_ALIGN 0
|
|
#define SPECIFIC_ENDIAN_MODE_HALFWORD_ALIGN 1
|
|
#define SPECIFIC_ENDIAN_MODE_BYTE_ALIGN 2
|
|
|
|
#define PCIE_CONFIG2_REG 0x408
|
|
#define CONFIG2_BAR1_SIZE_EN 1
|
|
#define CONFIG2_BAR1_SIZE_MASK 0xf
|
|
|
|
#define PCIE_IDVAL3_REG 0x43c
|
|
#define IDVAL3_CLASS_CODE_MASK 0xffffff
|
|
#define IDVAL3_SUBCLASS_SHIFT 8
|
|
#define IDVAL3_CLASS_SHIFT 16
|
|
|
|
#define PCIE_DLSTATUS_REG 0x1048
|
|
#define DLSTATUS_PHYLINKUP (1 << 13)
|
|
|
|
#define PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG 0x400c
|
|
#define C2P_MEM_WIN_ENDIAN_MODE_MASK 0x3
|
|
#define C2P_MEM_WIN_ENDIAN_NO_SWAP 0
|
|
#define C2P_MEM_WIN_ENDIAN_HALF_WORD_SWAP 1
|
|
#define C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP 2
|
|
#define C2P_MEM_WIN_BASE_ADDR_SHIFT 20
|
|
#define C2P_MEM_WIN_BASE_ADDR_MASK (0xfff << C2P_MEM_WIN_BASE_ADDR_SHIFT)
|
|
|
|
#define PCIE_RC_BAR1_CONFIG_LO_REG 0x402c
|
|
#define RC_BAR_CFG_LO_SIZE_256MB 0xd
|
|
#define RC_BAR_CFG_LO_MATCH_ADDR_SHIFT 20
|
|
#define RC_BAR_CFG_LO_MATCH_ADDR_MASK (0xfff << RC_BAR_CFG_LO_MATCH_ADDR_SHIFT)
|
|
|
|
#define PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG 0x4070
|
|
#define C2P_BASELIMIT_LIMIT_SHIFT 20
|
|
#define C2P_BASELIMIT_LIMIT_MASK (0xfff << C2P_BASELIMIT_LIMIT_SHIFT)
|
|
#define C2P_BASELIMIT_BASE_SHIFT 4
|
|
#define C2P_BASELIMIT_BASE_MASK (0xfff << C2P_BASELIMIT_BASE_SHIFT)
|
|
|
|
#define PCIE_UBUS_BAR1_CFG_REMAP_REG 0x4088
|
|
#define BAR1_CFG_REMAP_OFFSET_SHIFT 20
|
|
#define BAR1_CFG_REMAP_OFFSET_MASK (0xfff << BAR1_CFG_REMAP_OFFSET_SHIFT)
|
|
#define BAR1_CFG_REMAP_ACCESS_EN 1
|
|
|
|
#define PCIE_HARD_DEBUG_REG 0x4204
|
|
#define HARD_DEBUG_SERDES_IDDQ (1 << 23)
|
|
|
|
#define PCIE_CPU_INT1_MASK_CLEAR_REG 0x830c
|
|
#define CPU_INT_PCIE_ERR_ATTN_CPU (1 << 0)
|
|
#define CPU_INT_PCIE_INTA (1 << 1)
|
|
#define CPU_INT_PCIE_INTB (1 << 2)
|
|
#define CPU_INT_PCIE_INTC (1 << 3)
|
|
#define CPU_INT_PCIE_INTD (1 << 4)
|
|
#define CPU_INT_PCIE_INTR (1 << 5)
|
|
#define CPU_INT_PCIE_NMI (1 << 6)
|
|
#define CPU_INT_PCIE_UBUS (1 << 7)
|
|
#define CPU_INT_IPI (1 << 8)
|
|
|
|
#define PCIE_EXT_CFG_INDEX_REG 0x8400
|
|
#define EXT_CFG_FUNC_NUM_SHIFT 12
|
|
#define EXT_CFG_FUNC_NUM_MASK (0x7 << EXT_CFG_FUNC_NUM_SHIFT)
|
|
#define EXT_CFG_DEV_NUM_SHIFT 15
|
|
#define EXT_CFG_DEV_NUM_MASK (0xf << EXT_CFG_DEV_NUM_SHIFT)
|
|
#define EXT_CFG_BUS_NUM_SHIFT 20
|
|
#define EXT_CFG_BUS_NUM_MASK (0xff << EXT_CFG_BUS_NUM_SHIFT)
|
|
|
|
#define PCIE_DEVICE_OFFSET 0x9000
|
|
|
|
struct bcm6318_pcie {
|
|
void __iomem *base;
|
|
int irq;
|
|
struct clk *clk;
|
|
struct clk *clk25;
|
|
struct clk *clk_ubus;
|
|
struct reset_control *reset;
|
|
struct reset_control *reset_ext;
|
|
struct reset_control *reset_core;
|
|
struct reset_control *reset_hard;
|
|
};
|
|
|
|
static struct bcm6318_pcie bcm6318_pcie;
|
|
|
|
extern int bmips_pci_irq;
|
|
|
|
/*
|
|
* swizzle 32bits data to return only the needed part
|
|
*/
|
|
static int postprocess_read(u32 data, int where, unsigned int size)
|
|
{
|
|
u32 ret = 0;
|
|
|
|
switch (size) {
|
|
case 1:
|
|
ret = (data >> ((where & 3) << 3)) & 0xff;
|
|
break;
|
|
case 2:
|
|
ret = (data >> ((where & 3) << 3)) & 0xffff;
|
|
break;
|
|
case 4:
|
|
ret = data;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int preprocess_write(u32 orig_data, u32 val, int where,
|
|
unsigned int size)
|
|
{
|
|
u32 ret = 0;
|
|
|
|
switch (size) {
|
|
case 1:
|
|
ret = (orig_data & ~(0xff << ((where & 3) << 3))) |
|
|
(val << ((where & 3) << 3));
|
|
break;
|
|
case 2:
|
|
ret = (orig_data & ~(0xffff << ((where & 3) << 3))) |
|
|
(val << ((where & 3) << 3));
|
|
break;
|
|
case 4:
|
|
ret = val;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int bcm6318_pcie_can_access(struct pci_bus *bus, int devfn)
|
|
{
|
|
struct bcm6318_pcie *priv = &bcm6318_pcie;
|
|
|
|
switch (bus->number) {
|
|
case PCIE_BUS_BRIDGE:
|
|
return PCI_SLOT(devfn) == 0;
|
|
case PCIE_BUS_DEVICE:
|
|
if (PCI_SLOT(devfn) == 0)
|
|
return __raw_readl(priv->base + PCIE_DLSTATUS_REG)
|
|
& DLSTATUS_PHYLINKUP;
|
|
fallthrough;
|
|
default:
|
|
return false;
|
|
}
|
|
}
|
|
|
|
static int bcm6318_pcie_read(struct pci_bus *bus, unsigned int devfn,
|
|
int where, int size, u32 *val)
|
|
{
|
|
struct bcm6318_pcie *priv = &bcm6318_pcie;
|
|
u32 data;
|
|
u32 reg = where & ~3;
|
|
|
|
if (!bcm6318_pcie_can_access(bus, devfn))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
if (bus->number == PCIE_BUS_DEVICE)
|
|
reg += PCIE_DEVICE_OFFSET;
|
|
|
|
data = __raw_readl(priv->base + reg);
|
|
*val = postprocess_read(data, where, size);
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static int bcm6318_pcie_write(struct pci_bus *bus, unsigned int devfn,
|
|
int where, int size, u32 val)
|
|
{
|
|
struct bcm6318_pcie *priv = &bcm6318_pcie;
|
|
u32 data;
|
|
u32 reg = where & ~3;
|
|
|
|
if (!bcm6318_pcie_can_access(bus, devfn))
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
if (bus->number == PCIE_BUS_DEVICE)
|
|
reg += PCIE_DEVICE_OFFSET;
|
|
|
|
data = __raw_readl(priv->base + reg);
|
|
data = preprocess_write(data, val, where, size);
|
|
__raw_writel(data, priv->base + reg);
|
|
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static struct pci_ops bcm6318_pcie_ops = {
|
|
.read = bcm6318_pcie_read,
|
|
.write = bcm6318_pcie_write,
|
|
};
|
|
|
|
static struct resource bcm6318_pcie_io_resource;
|
|
static struct resource bcm6318_pcie_mem_resource;
|
|
static struct resource bcm6318_pcie_busn_resource;
|
|
|
|
static struct pci_controller bcm6318_pcie_controller = {
|
|
.pci_ops = &bcm6318_pcie_ops,
|
|
.io_resource = &bcm6318_pcie_io_resource,
|
|
.mem_resource = &bcm6318_pcie_mem_resource,
|
|
};
|
|
|
|
static void bcm6318_pcie_reset(struct bcm6318_pcie *priv)
|
|
{
|
|
u32 val;
|
|
|
|
reset_control_deassert(priv->reset_hard);
|
|
|
|
reset_control_assert(priv->reset);
|
|
reset_control_assert(priv->reset_core);
|
|
reset_control_assert(priv->reset_ext);
|
|
mdelay(10);
|
|
|
|
reset_control_deassert(priv->reset_ext);
|
|
mdelay(10);
|
|
|
|
reset_control_deassert(priv->reset);
|
|
mdelay(10);
|
|
|
|
val = __raw_readl(priv->base + PCIE_HARD_DEBUG_REG);
|
|
val &= ~HARD_DEBUG_SERDES_IDDQ;
|
|
__raw_writel(val, priv->base + PCIE_HARD_DEBUG_REG);
|
|
mdelay(10);
|
|
|
|
reset_control_deassert(priv->reset_core);
|
|
mdelay(200);
|
|
}
|
|
|
|
static void bcm6318_pcie_setup(struct bcm6318_pcie *priv)
|
|
{
|
|
u32 val;
|
|
|
|
__raw_writel(CPU_INT_PCIE_INTA | CPU_INT_PCIE_INTB |
|
|
CPU_INT_PCIE_INTC | CPU_INT_PCIE_INTD,
|
|
priv->base + PCIE_CPU_INT1_MASK_CLEAR_REG);
|
|
|
|
val = bcm6318_pcie_mem_resource.end & C2P_BASELIMIT_LIMIT_MASK;
|
|
val |= (bcm6318_pcie_mem_resource.start >> C2P_BASELIMIT_LIMIT_SHIFT)
|
|
<< C2P_BASELIMIT_BASE_SHIFT;
|
|
__raw_writel(val, priv->base + PCIE_CPU_2_PCIE_MEM_WIN0_BASELIMIT_REG);
|
|
|
|
/* setup class code as bridge */
|
|
val = __raw_readl(priv->base + PCIE_IDVAL3_REG);
|
|
val &= ~IDVAL3_CLASS_CODE_MASK;
|
|
val |= (PCI_CLASS_BRIDGE_PCI << IDVAL3_SUBCLASS_SHIFT);
|
|
__raw_writel(val, priv->base + PCIE_IDVAL3_REG);
|
|
|
|
/* disable bar1 size */
|
|
val = __raw_readl(priv->base + PCIE_CONFIG2_REG);
|
|
val &= ~CONFIG2_BAR1_SIZE_MASK;
|
|
__raw_writel(val, priv->base + PCIE_CONFIG2_REG);
|
|
|
|
/* set bar0 to little endian */
|
|
val = __raw_readl(priv->base + PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
|
|
val |= bcm6318_pcie_mem_resource.start & C2P_MEM_WIN_BASE_ADDR_MASK;
|
|
val |= C2P_MEM_WIN_ENDIAN_HALF_BYTE_SWAP;
|
|
__raw_writel(val, priv->base + PCIE_CPU_2_PCIE_MEM_WIN0_LO_REG);
|
|
|
|
__raw_writel(SPECIFIC_ENDIAN_MODE_BYTE_ALIGN,
|
|
priv->base + PCIE_SPECIFIC_REG);
|
|
|
|
__raw_writel(RC_BAR_CFG_LO_SIZE_256MB,
|
|
priv->base + PCIE_RC_BAR1_CONFIG_LO_REG);
|
|
|
|
__raw_writel(BAR1_CFG_REMAP_ACCESS_EN,
|
|
priv->base + PCIE_UBUS_BAR1_CFG_REMAP_REG);
|
|
|
|
__raw_writel(PCIE_BUS_DEVICE << EXT_CFG_BUS_NUM_SHIFT,
|
|
priv->base + PCIE_EXT_CFG_INDEX_REG);
|
|
}
|
|
|
|
static int bcm6318_pcie_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev->of_node;
|
|
struct bcm6318_pcie *priv = &bcm6318_pcie;
|
|
struct resource *res;
|
|
int ret;
|
|
LIST_HEAD(resources);
|
|
|
|
of_pci_check_probe_only();
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
priv->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(priv->base))
|
|
return PTR_ERR(priv->base);
|
|
|
|
priv->irq = platform_get_irq(pdev, 0);
|
|
if (!priv->irq)
|
|
return -ENODEV;
|
|
|
|
bmips_pci_irq = priv->irq;
|
|
|
|
priv->reset = devm_reset_control_get(dev, "pcie");
|
|
if (IS_ERR(priv->reset))
|
|
return PTR_ERR(priv->reset);
|
|
|
|
priv->reset_ext = devm_reset_control_get(dev, "pcie-ext");
|
|
if (IS_ERR(priv->reset_ext))
|
|
return PTR_ERR(priv->reset_ext);
|
|
|
|
priv->reset_core = devm_reset_control_get(dev, "pcie-core");
|
|
if (IS_ERR(priv->reset_core))
|
|
return PTR_ERR(priv->reset_core);
|
|
|
|
priv->reset_hard = devm_reset_control_get(dev, "pcie-hard");
|
|
if (IS_ERR(priv->reset_hard))
|
|
return PTR_ERR(priv->reset_hard);
|
|
|
|
priv->clk = devm_clk_get(dev, "pcie");
|
|
if (IS_ERR(priv->clk))
|
|
return PTR_ERR(priv->clk);
|
|
|
|
priv->clk25 = devm_clk_get(dev, "pcie25");
|
|
if (IS_ERR(priv->clk25))
|
|
return PTR_ERR(priv->clk25);
|
|
|
|
priv->clk_ubus = devm_clk_get(dev, "pcie-ubus");
|
|
if (IS_ERR(priv->clk_ubus))
|
|
return PTR_ERR(priv->clk_ubus);
|
|
|
|
ret = clk_prepare_enable(priv->clk);
|
|
if (ret) {
|
|
dev_err(dev, "could not enable clock\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(priv->clk25);
|
|
if (ret) {
|
|
dev_err(dev, "could not enable clock\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(priv->clk_ubus);
|
|
if (ret) {
|
|
dev_err(dev, "could not enable clock\n");
|
|
return ret;
|
|
}
|
|
|
|
pci_load_of_ranges(&bcm6318_pcie_controller, np);
|
|
if (!bcm6318_pcie_mem_resource.start)
|
|
return -EINVAL;
|
|
|
|
of_pci_parse_bus_range(np, &bcm6318_pcie_busn_resource);
|
|
pci_add_resource(&resources, &bcm6318_pcie_busn_resource);
|
|
|
|
bcm6318_pcie_reset(priv);
|
|
bcm6318_pcie_setup(priv);
|
|
|
|
register_pci_controller(&bcm6318_pcie_controller);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id bcm6318_pcie_of_match[] = {
|
|
{ .compatible = "brcm,bcm6318-pcie", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, bcm6318_pcie_of_match);
|
|
|
|
static struct platform_driver bcm6318_pcie_driver = {
|
|
.probe = bcm6318_pcie_probe,
|
|
.driver = {
|
|
.name = "bcm6318-pcie",
|
|
.of_match_table = bcm6318_pcie_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(bcm6318_pcie_driver);
|
|
|
|
MODULE_AUTHOR("Álvaro Fernández Rojas <noltari@gmail.com>");
|
|
MODULE_DESCRIPTION("BCM6318 PCIe Controller Driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:bcm6318-pcie");
|