mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 09:39:00 +00:00
8c405cdccc
The patches were generated from the RPi repo with the following command: git format-patch v6.6.34..rpi-6.1.y Some patches needed rebasing and, as usual, the applied and reverted, wireless drivers, Github workflows, READMEs and defconfigs patches were removed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
241 lines
7.7 KiB
Diff
241 lines
7.7 KiB
Diff
From e9b26efc223784f72ec43cc64b4c485c6798be42 Mon Sep 17 00:00:00 2001
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
Date: Tue, 15 Jun 2021 18:29:52 +0100
|
|
Subject: [PATCH 0463/1085] media: i2c: imx258: Make HFLIP and VFLIP controls
|
|
writable
|
|
|
|
The sensor supports H & V flips, but the controls were READ_ONLY.
|
|
|
|
Note that the Bayer order changes with these flips, therefore
|
|
they set the V4L2_CTRL_FLAG_MODIFY_LAYOUT property.
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
---
|
|
drivers/media/i2c/imx258.c | 98 +++++++++++++++++++++++++-------------
|
|
1 file changed, 64 insertions(+), 34 deletions(-)
|
|
|
|
--- a/drivers/media/i2c/imx258.c
|
|
+++ b/drivers/media/i2c/imx258.c
|
|
@@ -82,7 +82,8 @@
|
|
|
|
/* Orientation */
|
|
#define REG_MIRROR_FLIP_CONTROL 0x0101
|
|
-#define REG_CONFIG_MIRROR_FLIP 0x03
|
|
+#define REG_CONFIG_MIRROR_HFLIP 0x01
|
|
+#define REG_CONFIG_MIRROR_VFLIP 0x02
|
|
#define REG_CONFIG_FLIP_TEST_PATTERN 0x02
|
|
|
|
/* IMX258 native and active pixel array size. */
|
|
@@ -672,6 +673,23 @@ static const struct imx258_variant_cfg i
|
|
.num_regs = ARRAY_SIZE(imx258_pdaf_cfg_regs),
|
|
};
|
|
|
|
+/*
|
|
+ * The supported formats.
|
|
+ * This table MUST contain 4 entries per format, to cover the various flip
|
|
+ * combinations in the order
|
|
+ * - no flip
|
|
+ * - h flip
|
|
+ * - v flip
|
|
+ * - h&v flips
|
|
+ */
|
|
+static const u32 codes[] = {
|
|
+ /* 10-bit modes. */
|
|
+ MEDIA_BUS_FMT_SRGGB10_1X10,
|
|
+ MEDIA_BUS_FMT_SGRBG10_1X10,
|
|
+ MEDIA_BUS_FMT_SGBRG10_1X10,
|
|
+ MEDIA_BUS_FMT_SBGGR10_1X10
|
|
+};
|
|
+
|
|
static const char * const imx258_test_pattern_menu[] = {
|
|
"Disabled",
|
|
"Solid Colour",
|
|
@@ -865,6 +883,8 @@ struct imx258 {
|
|
struct v4l2_ctrl *vblank;
|
|
struct v4l2_ctrl *hblank;
|
|
struct v4l2_ctrl *exposure;
|
|
+ struct v4l2_ctrl *hflip;
|
|
+ struct v4l2_ctrl *vflip;
|
|
/* Current long exposure factor in use. Set through V4L2_CID_VBLANK */
|
|
unsigned int long_exp_shift;
|
|
|
|
@@ -968,9 +988,22 @@ static int imx258_write_regs(struct imx2
|
|
return 0;
|
|
}
|
|
|
|
+/* Get bayer order based on flip setting. */
|
|
+static u32 imx258_get_format_code(struct imx258 *imx258)
|
|
+{
|
|
+ unsigned int i;
|
|
+
|
|
+ lockdep_assert_held(&imx258->mutex);
|
|
+
|
|
+ i = (imx258->vflip->val ? 2 : 0) |
|
|
+ (imx258->hflip->val ? 1 : 0);
|
|
+
|
|
+ return codes[i];
|
|
+}
|
|
/* Open sub-device */
|
|
static int imx258_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
|
|
{
|
|
+ struct imx258 *imx258 = to_imx258(sd);
|
|
struct v4l2_mbus_framefmt *try_fmt =
|
|
v4l2_subdev_get_try_format(sd, fh->state, 0);
|
|
struct v4l2_rect *try_crop;
|
|
@@ -978,7 +1011,7 @@ static int imx258_open(struct v4l2_subde
|
|
/* Initialize try_fmt */
|
|
try_fmt->width = supported_modes[0].width;
|
|
try_fmt->height = supported_modes[0].height;
|
|
- try_fmt->code = MEDIA_BUS_FMT_SBGGR10_1X10;
|
|
+ try_fmt->code = imx258_get_format_code(imx258);
|
|
try_fmt->field = V4L2_FIELD_NONE;
|
|
|
|
/* Initialize try_crop */
|
|
@@ -1091,10 +1124,6 @@ static int imx258_set_ctrl(struct v4l2_c
|
|
ret = imx258_write_reg(imx258, IMX258_REG_TEST_PATTERN,
|
|
IMX258_REG_VALUE_16BIT,
|
|
ctrl->val);
|
|
- ret = imx258_write_reg(imx258, REG_MIRROR_FLIP_CONTROL,
|
|
- IMX258_REG_VALUE_08BIT,
|
|
- !ctrl->val ? REG_CONFIG_MIRROR_FLIP :
|
|
- REG_CONFIG_FLIP_TEST_PATTERN);
|
|
break;
|
|
case V4L2_CID_WIDE_DYNAMIC_RANGE:
|
|
if (!ctrl->val) {
|
|
@@ -1116,6 +1145,15 @@ static int imx258_set_ctrl(struct v4l2_c
|
|
ret = imx258_set_frame_length(imx258,
|
|
imx258->cur_mode->height + ctrl->val);
|
|
break;
|
|
+ case V4L2_CID_VFLIP:
|
|
+ case V4L2_CID_HFLIP:
|
|
+ ret = imx258_write_reg(imx258, REG_MIRROR_FLIP_CONTROL,
|
|
+ IMX258_REG_VALUE_08BIT,
|
|
+ (imx258->hflip->val ?
|
|
+ REG_CONFIG_MIRROR_HFLIP : 0) |
|
|
+ (imx258->vflip->val ?
|
|
+ REG_CONFIG_MIRROR_VFLIP : 0));
|
|
+ break;
|
|
default:
|
|
dev_info(&client->dev,
|
|
"ctrl(id:0x%x,val:0x%x) is not handled\n",
|
|
@@ -1137,11 +1175,13 @@ static int imx258_enum_mbus_code(struct
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
- /* Only one bayer order(GRBG) is supported */
|
|
+ struct imx258 *imx258 = to_imx258(sd);
|
|
+
|
|
+ /* Only one bayer format (10 bit) is supported */
|
|
if (code->index > 0)
|
|
return -EINVAL;
|
|
|
|
- code->code = MEDIA_BUS_FMT_SBGGR10_1X10;
|
|
+ code->code = imx258_get_format_code(imx258);
|
|
|
|
return 0;
|
|
}
|
|
@@ -1150,10 +1190,11 @@ static int imx258_enum_frame_size(struct
|
|
struct v4l2_subdev_state *sd_state,
|
|
struct v4l2_subdev_frame_size_enum *fse)
|
|
{
|
|
+ struct imx258 *imx258 = to_imx258(sd);
|
|
if (fse->index >= ARRAY_SIZE(supported_modes))
|
|
return -EINVAL;
|
|
|
|
- if (fse->code != MEDIA_BUS_FMT_SBGGR10_1X10)
|
|
+ if (fse->code != imx258_get_format_code(imx258))
|
|
return -EINVAL;
|
|
|
|
fse->min_width = supported_modes[fse->index].width;
|
|
@@ -1164,12 +1205,13 @@ static int imx258_enum_frame_size(struct
|
|
return 0;
|
|
}
|
|
|
|
-static void imx258_update_pad_format(const struct imx258_mode *mode,
|
|
+static void imx258_update_pad_format(struct imx258 *imx258,
|
|
+ const struct imx258_mode *mode,
|
|
struct v4l2_subdev_format *fmt)
|
|
{
|
|
fmt->format.width = mode->width;
|
|
fmt->format.height = mode->height;
|
|
- fmt->format.code = MEDIA_BUS_FMT_SBGGR10_1X10;
|
|
+ fmt->format.code = imx258_get_format_code(imx258);
|
|
fmt->format.field = V4L2_FIELD_NONE;
|
|
}
|
|
|
|
@@ -1182,7 +1224,7 @@ static int __imx258_get_pad_format(struc
|
|
sd_state,
|
|
fmt->pad);
|
|
else
|
|
- imx258_update_pad_format(imx258->cur_mode, fmt);
|
|
+ imx258_update_pad_format(imx258, imx258->cur_mode, fmt);
|
|
|
|
return 0;
|
|
}
|
|
@@ -1218,13 +1260,12 @@ static int imx258_set_pad_format(struct
|
|
|
|
mutex_lock(&imx258->mutex);
|
|
|
|
- /* Only one raw bayer(GBRG) order is supported */
|
|
- fmt->format.code = MEDIA_BUS_FMT_SBGGR10_1X10;
|
|
+ fmt->format.code = imx258_get_format_code(imx258);
|
|
|
|
mode = v4l2_find_nearest_size(supported_modes,
|
|
ARRAY_SIZE(supported_modes), width, height,
|
|
fmt->format.width, fmt->format.height);
|
|
- imx258_update_pad_format(mode, fmt);
|
|
+ imx258_update_pad_format(imx258, mode, fmt);
|
|
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
|
|
framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad);
|
|
*framefmt = fmt->format;
|
|
@@ -1367,15 +1408,6 @@ static int imx258_start_streaming(struct
|
|
return ret;
|
|
}
|
|
|
|
- /* Set Orientation be 180 degree */
|
|
- ret = imx258_write_reg(imx258, REG_MIRROR_FLIP_CONTROL,
|
|
- IMX258_REG_VALUE_08BIT, REG_CONFIG_MIRROR_FLIP);
|
|
- if (ret) {
|
|
- dev_err(&client->dev, "%s failed to set orientation\n",
|
|
- __func__);
|
|
- return ret;
|
|
- }
|
|
-
|
|
/* Apply customized values from user */
|
|
ret = __v4l2_ctrl_handler_setup(imx258->sd.ctrl_handler);
|
|
if (ret)
|
|
@@ -1564,7 +1596,6 @@ static int imx258_init_controls(struct i
|
|
struct i2c_client *client = v4l2_get_subdevdata(&imx258->sd);
|
|
const struct imx258_link_freq_config *link_freq_cfgs;
|
|
struct v4l2_fwnode_device_properties props;
|
|
- struct v4l2_ctrl *vflip, *hflip;
|
|
struct v4l2_ctrl_handler *ctrl_hdlr;
|
|
const struct imx258_link_cfg *link_cfg;
|
|
s64 vblank_def;
|
|
@@ -1589,16 +1620,15 @@ static int imx258_init_controls(struct i
|
|
if (imx258->link_freq)
|
|
imx258->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
- /* The driver only supports one bayer order and flips by default. */
|
|
- hflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx258_ctrl_ops,
|
|
- V4L2_CID_HFLIP, 1, 1, 1, 1);
|
|
- if (hflip)
|
|
- hflip->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
-
|
|
- vflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx258_ctrl_ops,
|
|
- V4L2_CID_VFLIP, 1, 1, 1, 1);
|
|
- if (vflip)
|
|
- vflip->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
+ imx258->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx258_ctrl_ops,
|
|
+ V4L2_CID_HFLIP, 0, 1, 1, 1);
|
|
+ if (imx258->hflip)
|
|
+ imx258->hflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
|
|
+
|
|
+ imx258->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx258_ctrl_ops,
|
|
+ V4L2_CID_VFLIP, 0, 1, 1, 1);
|
|
+ if (imx258->vflip)
|
|
+ imx258->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
|
|
|
|
link_freq_cfgs = &imx258->link_freq_configs[0];
|
|
link_cfg = link_freq_cfgs[imx258->lane_mode_idx].link_cfg;
|