openwrt/target/linux/generic/hack-5.15/760-net-usb-r8152-add-LED-configuration-from-OF.patch
Marty Jones 34d2964554 kernel: backport fixes for realtek r8152
Fixes issues with RTL8156 2.5G USB adapters

- # ethtool eth1
Settings for eth1:
        Supported ports: [ ]
        Supported link modes:   Not reported
        Supported pause frame use: No
        Supports auto-negotiation: No
        Supported FEC modes: Not reported
        Advertised link modes:  Not reported
        Advertised pause frame use: No
        Advertised auto-negotiation: No
        Advertised FEC modes: Not reported
        Speed: 2500Mb/s
        Duplex: Half
        Port: Twisted Pair
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: off
        MDI-X: Unknown
        Current message level: 0x00000007 (7)
                               drv probe link
        Link detected: yes
- #

- r8152: break the loop when the budget is exhausted
- r8152: Block future register access if register access fails
- r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE
- r8152: add vendor/device ID pair for D-Link DUB-E250
- r8152: try to use a normal budget
- r8152: set bp in bulk
- r8152: adjust generic_ocp_write function
- r8152: fix the autosuspend doesn't work
- r8152: Add __GFP_NOWARN to big allocations
- r8152: reduce the control transfer of rtl8152_get_version()
- r8152: remove rtl_vendor_mode function
- r8152: avoid to change cfg for all devices
- r8152: add USB device driver for config selection
- r8152: use napi_gro_frags
- cdc_ether: no need to blacklist any r8152 devices
- cdc_ether: add u-blox 0x1313 composition

Build system: x86_64
Build-tested: bcm2711, rockchip, x86/64
Run-tested: bcm2711/RPi4B, rockchip/nanopi r2s, x86/64

Signed-off-by: Marty Jones <mj8263788@gmail.com>
2023-12-02 21:57:38 +01:00

75 lines
1.9 KiB
Diff

From 82985725e071f2a5735052f18e109a32aeac3a0b Mon Sep 17 00:00:00 2001
From: David Bauer <mail@david-bauer.net>
Date: Sun, 26 Jul 2020 02:38:31 +0200
Subject: [PATCH] net: usb: r8152: add LED configuration from OF
This adds the ability to configure the LED configuration register using
OF. This way, the correct value for board specific LED configuration can
be determined.
Signed-off-by: David Bauer <mail@david-bauer.net>
---
drivers/net/usb/r8152.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -11,6 +11,7 @@
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/usb.h>
+#include <linux/of.h>
#include <linux/crc32.h>
#include <linux/if_vlan.h>
#include <linux/uaccess.h>
@@ -6980,6 +6981,22 @@ static void rtl_tally_reset(struct r8152
ocp_write_word(tp, MCU_TYPE_PLA, PLA_RSTTALLY, ocp_data);
}
+static int r8152_led_configuration(struct r8152 *tp)
+{
+ u32 led_data;
+ int ret;
+
+ ret = of_property_read_u32(tp->udev->dev.of_node, "realtek,led-data",
+ &led_data);
+
+ if (ret)
+ return ret;
+
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_LEDSEL, led_data);
+
+ return 0;
+}
+
static void r8152b_init(struct r8152 *tp)
{
u32 ocp_data;
@@ -7021,6 +7038,8 @@ static void r8152b_init(struct r8152 *tp
ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+
+ r8152_led_configuration(tp);
}
static void r8153_init(struct r8152 *tp)
@@ -7161,6 +7180,8 @@ static void r8153_init(struct r8152 *tp)
tp->coalesce = COALESCE_SLOW;
break;
}
+
+ r8152_led_configuration(tp);
}
static void r8153b_init(struct r8152 *tp)
@@ -7243,6 +7264,8 @@ static void r8153b_init(struct r8152 *tp
rtl_tally_reset(tp);
tp->coalesce = 15000; /* 15 us */
+
+ r8152_led_configuration(tp);
}
static void r8153c_init(struct r8152 *tp)