openwrt/target/linux/ath79/dts/ar7161_fortinet_fap-220-b.dts
Lech Perczak 7e5e010035
ath79: fortinet-fap-220-b: convert to nvmem-layout
Now that MAC address parser supports the hex format (without
delimiters), use the canonical MAC address stored in U-boot partition.
Get rid of the "mac-address-increment" binding.
While at that, convert ART partition too.

Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
2023-11-27 00:34:49 +01:00

165 lines
3.0 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar7100.dtsi"
#include "arxxxx_fortinet_loader.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "fortinet,fap-220-b", "qca,ar7161";
model = "Fortinet FAP-220-B";
chosen {
bootargs = "console=ttyS0,9600";
};
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
label-mac-device = &eth1;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
led_power: power-green {
label = "green:power";
gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
status-green {
label = "green:status";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
};
status-yellow {
label = "yellow:status";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
panic-indicator;
};
mode-green {
label = "green:mode";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
mode-yellow {
label = "yellow:mode";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
wlan2g-green {
label = "green:wlan2g";
gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wlan2g-yellow {
label = "yellow:wlan2g";
gpios = <&ath9k0 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0assoc";
};
wlan5g-green {
label = "green:wlan5g";
gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wlan5g-yellow {
label = "yellow:wlan5g";
gpios = <&ath9k1 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1assoc";
};
};
virtual_flash {
devices = <&fwconcat0 &fwconcat1 &fwconcat2>;
};
};
&pcie0 {
status = "okay";
ath9k0: wifi@0,11 { /* 2.4 GHz */
compatible = "pci168c,0029";
reg = <0x8800 0 0 0 0>;
ieee80211-freq-limit = <2402000 2482000>;
nvmem-cells = <&macaddr_uboot_3ff80 9>, <&cal_art_1000>;
nvmem-cell-names = "mac-address", "calibration";
#gpio-cells = <2>;
gpio-controller;
};
ath9k1: wifi@0,12 { /* 5 GHz */
compatible = "pci168c,0029";
reg = <0x9000 0 0 0 0>;
ieee80211-freq-limit = <2402000 2482000 4900000 5990000>;
nvmem-cells = <&macaddr_uboot_3ff80 2>, <&cal_art_5000>;
nvmem-cell-names = "mac-address", "calibration";
#gpio-cells = <2>;
gpio-controller;
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0x0>;
};
};
&eth0 {
status = "okay";
compatible = "syscon", "simple-mfd";
};
&eth1 {
status = "okay";
nvmem-cells = <&macaddr_uboot_3ff80 0>;
nvmem-cell-names = "mac-address";
pll-data = <0x00110000 0x00001099 0x00991099>;
phy-handle = <&phy0>;
phy-mode = "rgmii";
};
&usb1 {
status = "okay";
};
&usb_phy {
status = "okay";
};
&art {
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
cal_art_1000: calibration@1000 {
reg = <0x1000 0xeb8>;
};
cal_art_5000: calibration@5000 {
reg = <0x5000 0xeb8>;
};
};
};