mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 15:32:33 +00:00
735efbfb7c
The GS110TUP v1 is a managed switch similar to the GS110TPP v1, but with port 10 as SFP instead of RJ-45 and a total budget of 240 watts. Ports 1-4 support 60-watt 802.3bt PoE and ports 5-8 support 30-watt 802.3at. The flash layout of the two switches are identical, and the U-Boot configurations are the same except for having a different magic number, so installation can be done via the same U-Boot method. The following command will be needed to enable the port LEDs as per https://forum.openwrt.org/t/72510/51 : fw_setenv bootcmd "rtk network on; boota" Additionally, port 9 (1000base-T from a separate QSGMII PHY) does not function without this. Port 10 was not tested as no SFP module was available. Signed-off-by: Jacob Potter <jacob@j4cbo.com> [rebase on merged flash layout] Signed-off-by: Sander Vanheule <sander@svanheule.net>
62 lines
1.1 KiB
Plaintext
62 lines
1.1 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
#include "rtl8380_netgear_gigabit.dtsi"
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
compatible = "netgear,gs110tup-v1", "realtek,rtl838x-soc";
|
|
model = "Netgear GS110TUP v1";
|
|
|
|
aliases {
|
|
led-boot = &led_status_green;
|
|
led-failsafe = &led_status_red;
|
|
led-running = &led_status_green;
|
|
led-upgrade = &led_status_blue;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_status_red: led-0 {
|
|
label = "red:status";
|
|
color = <LED_COLOR_ID_RED>;
|
|
function = LED_FUNCTION_STATUS;
|
|
gpios = <&gpio1 31 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led_status_green: led-1 {
|
|
label = "green:status";
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_STATUS;
|
|
gpios = <&gpio1 32 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led_status_blue: led-2 {
|
|
label = "blue:status";
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
function = LED_FUNCTION_STATUS;
|
|
gpios = <&gpio1 34 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&firmware {
|
|
openwrt,ih-magic = <0x4e474720>;
|
|
};
|
|
|
|
&uart1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mdio {
|
|
EXTERNAL_PHY(16)
|
|
EXTERNAL_PHY(24)
|
|
};
|
|
|
|
&switch0 {
|
|
ports {
|
|
SWITCH_PORT(16, 9, qsgmii)
|
|
SWITCH_SFP_PORT(24, 10, rgmii-id)
|
|
};
|
|
};
|