openwrt/target/linux/ath79
Andrew Cameron 19ff3f5105 ath79: add support for the TP-LINK CPE220 V3
This adds support for a popular low-cost 2.4GHz N based AP

Specifications:
SoC: Qualcomm Atheros QCA9533 (650MHz)
RAM: 64MB
Storage: 8 MB SPI NOR
Wireless: 2.4GHz N based built into SoC 2x2
Ethernet: 2x 100/10 Mbps, integrated into SoC

Installation:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254

This also applies some minor changes to the common DTSI:
- use &wmac for label-mac-device, as this one is actually set up in
  common DTSI
- move &eth0 to parent DTSI
- fix several leading spaces, added/removed newlines

Signed-off-by: Andrew Cameron <apcameron@softhome.net>
[DTS style fixes/improvements, updated commit message/title,
backport to 19.07]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-01-08 17:42:37 +01:00
..
base-files ath79: add support for the TP-LINK CPE220 V3 2020-01-08 17:42:37 +01:00
dts ath79: add support for the TP-LINK CPE220 V3 2020-01-08 17:42:37 +01:00
files ar71xx/ath79: ag71xx: dont fetch the same var again 2019-08-27 10:31:06 +02:00
generic ath79: add support for jjPlus JA76PF2 2019-03-18 20:43:09 +01:00
image ath79: add support for the TP-LINK CPE220 V3 2020-01-08 17:42:37 +01:00
nand treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
patches-4.14 kernel: bump 4.14 to 4.14.162 2020-01-04 23:04:24 +01:00
tiny treewide: use wpad-basic for not small flash targets 2018-10-16 15:07:41 +01:00
config-4.14 ath79: add support for D-Link DIR-859 A1 2018-12-30 20:08:13 +01:00
Makefile Revert "ath79: make target source-only" 2019-08-14 21:27:11 +02:00
modules.mk ath79: add new OF only target for QCA MIPS silicon 2018-05-07 08:06:51 +02:00