mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-24 07:46:48 +00:00
45b3c620e5
AC2400 Dual-Band Gigabit Wi-Fi Router base on ipq8064. https://www.linksys.com/support-product?sku=E8350 Specification: - Qualcomm dual-core IPQ8064 @ 1.4 GHz - 512 MB of RAM - 4 MB of SPI NOR MX25U3235F - 128 MB of NAND S34MS01G2 - Qualcomm QCA9880 2.4GHz 802.11bgn - Quantenna QSR1000 5GHz 802.11ac (no support) - 4 x 10/100/1000 Mbit/s w/ vlan support Ethernet - Qualcomm Atheros QCA8337 switch - 1 x 3.0 + 1 x 2.0 (combo with eSata port) - 115200, 8N1 internal serial console - Power, Reset, WPS and WLAN buttons - Power, WPS and WLAN leds - 12 VDC, 3 A power Installation: The installation must be done using web interface of the router. To achive this new firmware-utils tool was added to set correct magic headers for the factory images. Installation from vendor firmware: 1. Flash over the native Linksys WEB interface using factory image. Installation using recovery mode: 1. Power off the device and disconnect the WAN port. (Only LAN port to be connected) 2. Press & hold the "Reset" button 3. Power on the device & wait 10 seconds with pressed "Reset" button 4. Set IP Internet Protocol on your PC from 192.168.1.0/24 network (Router is on IP 192.168.1.1) 5. Open the Firmware Recovery page in your browser: http://192.168.1.1/index.shtml Firmware Recovery -> File Name -> Recovery & Reboot The device page in inbox: https://openwrt.org/inbox/toh/linksys/linksys_ea8350_1 Signed-off-by: Sergey Filippov <sergey.filippov@outlook.com> Link: https://github.com/openwrt/openwrt/pull/15798 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
100 lines
1.8 KiB
Bash
100 lines
1.8 KiB
Bash
PART_NAME=firmware
|
|
REQUIRE_IMAGE_METADATA=1
|
|
|
|
RAMFS_COPY_BIN='fw_printenv fw_setenv'
|
|
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
|
|
|
platform_check_image() {
|
|
return 0;
|
|
}
|
|
|
|
platform_do_upgrade() {
|
|
case "$(board_name)" in
|
|
arris,tr4400-v2 |\
|
|
askey,rt4230w-rev6 |\
|
|
compex,wpq864|\
|
|
fortinet,fap-421e|\
|
|
linksys,e8350-v1|\
|
|
netgear,d7800 |\
|
|
netgear,r7500 |\
|
|
netgear,r7500v2 |\
|
|
netgear,r7800 |\
|
|
netgear,xr450 |\
|
|
netgear,xr500 |\
|
|
nokia,ac400i |\
|
|
qcom,ipq8064-ap148 |\
|
|
qcom,ipq8064-ap161)
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
asrock,g10)
|
|
asrock_upgrade_prepare
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
buffalo,wxr-2533dhp)
|
|
buffalo_upgrade_prepare_ubi
|
|
CI_ROOTPART="ubi_rootfs"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
edgecore,ecw5410)
|
|
part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
|
|
if [ "$part" = "rootfs1" ]; then
|
|
fw_setenv active 2 || exit 1
|
|
CI_UBIPART="rootfs2"
|
|
else
|
|
fw_setenv active 1 || exit 1
|
|
CI_UBIPART="rootfs1"
|
|
fi
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
extreme,ap3935)
|
|
CI_ROOTPART="nand_flash"
|
|
CI_KERNPART="PriImg"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
linksys,ea7500-v1 |\
|
|
linksys,ea8500)
|
|
platform_do_upgrade_linksys "$1"
|
|
;;
|
|
meraki,mr42 |\
|
|
meraki,mr52)
|
|
CI_KERNPART="bootkernel2"
|
|
nand_do_upgrade "$1"
|
|
;;
|
|
tplink,ad7200 |\
|
|
tplink,c2600)
|
|
PART_NAME="os-image:rootfs"
|
|
MTD_CONFIG_ARGS="-s 0x200000"
|
|
default_do_upgrade "$1"
|
|
;;
|
|
asus,onhub |\
|
|
tplink,onhub)
|
|
export_bootdevice
|
|
export_partdevice CI_ROOTDEV 0
|
|
CI_KERNPART="kernel"
|
|
CI_ROOTPART="rootfs"
|
|
CI_DATAPART="rootfs_data"
|
|
emmc_do_upgrade "$1"
|
|
;;
|
|
tplink,vr2600v)
|
|
MTD_CONFIG_ARGS="-s 0x200000"
|
|
default_do_upgrade "$1"
|
|
;;
|
|
zyxel,nbg6817)
|
|
zyxel_do_upgrade "$1"
|
|
;;
|
|
*)
|
|
default_do_upgrade "$1"
|
|
;;
|
|
esac
|
|
}
|
|
|
|
platform_copy_config() {
|
|
case "$(board_name)" in
|
|
asus,onhub |\
|
|
tplink,onhub)
|
|
emmc_copy_config
|
|
;;
|
|
esac
|
|
return 0
|
|
}
|