mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 01:59:02 +00:00
c4931713df
This commit adds support for the OCEDO Koala
SOC: Qualcomm QCA9558 (Scorpion)
RAM: 128MB
FLASH: 16MiB
WLAN1: QCA9558 2.4 GHz 802.11bgn 3x3
WLAN2: QCA9880 5 GHz 802.11nac 3x3
INPUT: RESET button
LED: Power, LAN, WiFi 2.4, WiFi 5, SYS
Serial: Header Next to Black metal shield
Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V)
The Serial setting is 115200-8-N-1.
Tested and working:
- Ethernet
- 2.4 GHz WiFi
- 5 GHz WiFi
- TFTP boot from ramdisk image
- Installation via ramdisk image
- OpenWRT sysupgrade
- Buttons
- LEDs
Installation seems to be possible only through booting an OpenWRT
ramdisk image.
Hold down the reset button while powering on the device. It will load a
ramdisk image named 'koala-uImage-initramfs-lzma.bin' from 192.168.100.8.
Note: depending on the present software, the device might also try to
pull a file called 'koala-uimage-factory'. Only the name differs, it
is still used as a ramdisk image.
Wait for the ramdisk image to boot. OpenWRT can be written to the flash
via sysupgrade or mtd.
Due to the flip-flop bootloader which we not (yet) support, you need to
set the partition the bootloader is selecting. It is possible from the
initramfs image with
> fw_setenv bootcmd run bootcmd_1
Afterwards you can reboot the device.
Signed-off-by: David Bauer <mail@david-bauer.net>
145 lines
4.5 KiB
Makefile
145 lines
4.5 KiB
Makefile
include ./common-netgear.mk
|
|
|
|
define Device/avm_fritz300e
|
|
ATH_SOC := ar7242
|
|
DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E
|
|
KERNEL := kernel-bin | append-dtb | lzma | eva-image
|
|
KERNEL_INITRAMFS := $$(KERNEL)
|
|
IMAGE_SIZE := 15232k
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \
|
|
append-squashfs-fakeroot-be | pad-to 256 | \
|
|
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
DEVICE_PACKAGES := fritz-tffs rssileds -swconfig
|
|
endef
|
|
TARGET_DEVICES += avm_fritz300e
|
|
|
|
define Device/buffalo_wzr-hp-g450h
|
|
ATH_SOC := ar7242
|
|
DEVICE_TITLE := Buffalo WZR-HP-G450H
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
|
IMAGE_SIZE := 32256k
|
|
SUPPORTED_DEVICES += wzr-hp-g450h
|
|
endef
|
|
TARGET_DEVICES += buffalo_wzr-hp-g450h
|
|
|
|
define Device/embeddedwireless_dorin
|
|
ATH_SOC := ar9331
|
|
DEVICE_TITLE := Embedded Wireless Dorin
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2
|
|
IMAGE_SIZE := 16000k
|
|
endef
|
|
TARGET_DEVICES += embeddedwireless_dorin
|
|
|
|
define Device/etactica_eg200
|
|
ATH_SOC := ar9331
|
|
DEVICE_TITLE := eTactica EG200
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-ledtrig-oneshot \
|
|
kmod-usb-serial kmod-usb-serial-ftdi kmod-usb-storage kmod-fs-ext4
|
|
SUPPORTED_DEVICES += rme-eg200
|
|
endef
|
|
TARGET_DEVICES += etactica_eg200
|
|
|
|
define Device/glinet_ar150
|
|
ATH_SOC := ar9330
|
|
DEVICE_TITLE := GL.iNet GL-AR150
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2
|
|
IMAGE_SIZE := 16000k
|
|
SUPPORTED_DEVICES += gl-ar150
|
|
endef
|
|
TARGET_DEVICES += glinet_ar150
|
|
|
|
define Device/glinet_ar300m_nor
|
|
ATH_SOC := qca9533
|
|
DEVICE_TITLE := GL.iNet GL-AR300M
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
IMAGE_SIZE := 16000k
|
|
SUPPORTED_DEVICES += gl-ar300m
|
|
endef
|
|
TARGET_DEVICES += glinet_ar300m_nor
|
|
|
|
define Device/ocedo_koala
|
|
ATH_SOC := qca9558
|
|
DEVICE_TITLE := OCEDO Koala
|
|
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
|
|
SUPPORTED_DEVICES += koala
|
|
IMAGE_SIZE := 7424k
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += ocedo_koala
|
|
|
|
define Device/ocedo_raccoon
|
|
ATH_SOC := ar9344
|
|
DEVICE_TITLE := OCEDO Raccoon
|
|
IMAGE_SIZE := 7424k
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += ocedo_raccoon
|
|
|
|
define Device/openmesh_om5p-ac-v2
|
|
ATH_SOC := qca9558
|
|
DEVICE_TITLE := OpenMesh OM5P-AC v2
|
|
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x om-watchdog
|
|
IMAGE_SIZE := 7808k
|
|
SUPPORTED_DEVICES += om5p-acv2
|
|
endef
|
|
TARGET_DEVICES += openmesh_om5p-ac-v2
|
|
|
|
define Device/pcs_cap324
|
|
ATH_SOC := ar9344
|
|
DEVICE_TITLE := PowerCloud Systems CAP324
|
|
IMAGE_SIZE := 16000k
|
|
IMAGES := sysupgrade.bin
|
|
SUPPORTED_DEVICES += cap324
|
|
endef
|
|
TARGET_DEVICES += pcs_cap324
|
|
|
|
define Device/pcs_cr3000
|
|
ATH_SOC := ar9341
|
|
DEVICE_TITLE := PowerCloud Systems CR3000
|
|
IMAGE_SIZE := 7808k
|
|
IMAGES := sysupgrade.bin
|
|
SUPPORTED_DEVICES += cr3000
|
|
endef
|
|
TARGET_DEVICES += pcs_cr3000
|
|
|
|
define Device/pcs_cr5000
|
|
ATH_SOC := ar9344
|
|
DEVICE_TITLE := PowerCloud Systems CR5000
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-core
|
|
IMAGE_SIZE := 7808k
|
|
IMAGES := sysupgrade.bin
|
|
SUPPORTED_DEVICES += cr5000
|
|
endef
|
|
TARGET_DEVICES += pcs_cr5000
|
|
|
|
define Device/netgear_wndr3800
|
|
ATH_SOC := ar7161
|
|
DEVICE_TITLE := NETGEAR WNDR3800
|
|
NETGEAR_KERNEL_MAGIC := 0x33373031
|
|
KERNEL := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma
|
|
NETGEAR_BOARD_ID := WNDR3800
|
|
NETGEAR_HW_ID := 29763654+16+128
|
|
IMAGE_SIZE := 15872k
|
|
IMAGES := sysupgrade.bin factory.img
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset
|
|
SUPPORTED_DEVICES += wndr3800
|
|
endef
|
|
TARGET_DEVICES += netgear_wndr3800
|
|
|
|
define Device/phicomm_k2t
|
|
ATH_SOC := qca9563
|
|
DEVICE_TITLE := Phicomm K2T
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
|
|
IMAGE_SIZE := 15744k
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/default := append-kernel | append-rootfs | pad-rootfs
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
DEVICE_PACKAGES := kmod-leds-reset kmod-ath10k ath10k-firmware-qca9888
|
|
endef
|
|
TARGET_DEVICES += phicomm_k2t
|