mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 06:57:57 +00:00
ffa40fcc7f
Seems to be very similar to: https://openwrt.org/toh/tp-link/tl-wr902ac_v3 1 x usb 1 x eth Powered by mini usb port. Installation: Can use TFTP method to install: 1. establish TFTP server at 192.168.0.66 2. provide tp_recover.bin file to the TFTP server 3. turn on router with reset button pressed 4. wait for led blinking, then release reset Specification based on dmesg from already flashed device: SoC Type: MediaTek MT7628AN ver:1 eco:2 CPU0 revision is: 00019655 (MIPS 24KEc) Memory: 56028K/65536K available CPU Clock: 580MHz WiFi: MT7613BE MAC addresses are all the same, except wifi5g which last part is decrement by one, ie.: eth0 40:ed:00:cf:b9:9b br-lan 40:ed:00:cf:b9:9b phy0-ap0 40:ed:00:cf:b9:9b phy1-ap0 40:ed:00:cf:b9:9a Signed-off-by: Kamil Jońca <kjonca@onet.pl>
114 lines
2.2 KiB
Plaintext
114 lines
2.2 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include "mt7628an_tplink_8m.dtsi"
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
/ {
|
|
compatible = "tplink,tl-wr902ac-v4", "mediatek,mt7628an-soc";
|
|
model = "TP-Link TL-WR902AC v4";
|
|
|
|
aliases {
|
|
led-boot = &led_power;
|
|
led-failsafe = &led_power;
|
|
led-running = &led_power;
|
|
led-upgrade = &led_power;
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
button-reset {
|
|
label = "reset";
|
|
gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
|
|
button-sw1 {
|
|
label = "sw1";
|
|
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
|
|
linux,code = <BTN_0>;
|
|
};
|
|
|
|
button-sw2 {
|
|
label = "sw2";
|
|
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
|
|
linux,code = <BTN_1>;
|
|
};
|
|
|
|
button-wps {
|
|
label = "wps";
|
|
gpios = <&gpio 41 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_power: led-0 {
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_POWER;
|
|
gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led-1 {
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_USB;
|
|
gpios = <&gpio 43 GPIO_ACTIVE_LOW>;
|
|
trigger-sources = <&ohci_port1>, <&ehci_port1>;
|
|
linux,default-trigger = "usbport";
|
|
};
|
|
|
|
led-2 {
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_WAN;
|
|
gpios = <&gpio 39 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led-3 {
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
function = LED_FUNCTION_WLAN;
|
|
gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "phy0tpt";
|
|
};
|
|
|
|
led-4 {
|
|
function = LED_FUNCTION_WPS;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&eeprom_factory_28000 {
|
|
/* tl-wr902ac-v4 has different eeprom size '0x4da8' for MT7613 */
|
|
reg = <0x28000 0x4da8>;
|
|
};
|
|
|
|
&pcie {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie0 {
|
|
wifi@0,0 {
|
|
compatible = "mediatek,mt76";
|
|
reg = <0x0000 0 0 0 0>;
|
|
ieee80211-freq-limit = <5000000 6000000>;
|
|
nvmem-cells = <&eeprom_factory_28000>, <&macaddr_factory_f100 (-1)>;
|
|
nvmem-cell-names = "eeprom", "mac-address";
|
|
};
|
|
};
|
|
|
|
&state_default {
|
|
gpio {
|
|
groups = "i2c", "i2s", "p0led_an", "p2led_an", "p4led_an", "uart1", "wdt", "wled_an";
|
|
function = "gpio";
|
|
};
|
|
};
|
|
|
|
&wmac {
|
|
status = "okay";
|
|
nvmem-cells = <&eeprom_factory_28000>, <&macaddr_factory_f100 0>;
|
|
nvmem-cell-names = "eeprom", "mac-address";
|
|
};
|