openwrt/target/linux/ramips/dts/mt7621_zyxel_nwa-ax.dtsi
Rosen Penev f4c33d098f
ramips: mt7621: convert to nvmem-layout
Allows replacing mac-address-increment with mac-base.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
2023-11-26 01:30:32 +01:00

148 lines
2.2 KiB
Plaintext

#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
aliases {
label-mac-device = &gmac0;
};
};
&nand {
status = "okay";
mediatek,nmbm;
mediatek,bmt-max-ratio = <15>;
mediatek,bmt-max-reserved-blocks = <64>;
mediatek,bmt-remap-range =
<0x0 0x980000>,
<0x2980000 0x7800000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "u-boot-env";
reg = <0x80000 0x80000>;
read-only;
};
factory: partition@100000 {
label = "factory";
reg = <0x100000 0x80000>;
read-only;
};
partition@180000 {
label = "firmware";
reg = <0x180000 0x2800000>;
/* This concatenates kernel1 & kernel2 & rootfs */
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x0 0x800000>;
};
partition@400000 {
label = "ubi";
reg = <0x800000 0x2000000>;
};
};
partition@2980000 {
label = "zy_firmware_1";
reg = <0x2980000 0x2800000>;
read-only;
};
partition@5180000 {
label = "zy_rootfs_data";
reg = <0x5180000 0x1400000>;
read-only;
};
partition@6580000 {
label = "zy_logs";
reg = <0x6580000 0xd00000>;
read-only;
};
partition@7280000 {
label = "myzyxel";
reg = <0x7280000 0x480000>;
read-only;
};
partition@7700000 {
label = "bootconfig";
reg = <0x7700000 0x80000>;
};
mrd: partition@7780000 {
label = "mrd";
reg = <0x7780000 0x80000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
macaddr_mrd_1fff8: macaddr@1fff8 {
reg = <0x1fff8 0x6>;
};
};
};
};
};
&pcie {
status = "okay";
};
&pcie1 {
wlan_5g: wifi@0,0 {
reg = <0x0 0 0 0 0>;
compatible = "mediatek,mt76";
mediatek,mtd-eeprom = <&factory 0x0>;
/* MAC-Address set in userspace */
};
};
&gmac0 {
nvmem-cells = <&macaddr_mrd_1fff8>;
nvmem-cell-names = "mac-address";
};
&switch0 {
ports {
port@4 {
status = "okay";
label = "lan";
};
};
};
&state_default {
gpio {
groups = "uart3";
function = "gpio";
};
};