mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 18:47:06 +00:00
149 lines
3.0 KiB
Diff
149 lines
3.0 KiB
Diff
From b9a96a4b09c30803092ed4a9f730cb3573037cd6 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Tue, 28 May 2019 16:23:51 +0100
|
|
Subject: [PATCH 511/725] BCM270X_DT: Create bcm2708-rpi-zero.dts
|
|
|
|
The Pi Zero deserves a dedicated .dtb file - sharing the b-plus .dtb
|
|
has been observed to cause an issue with the MAC address of some
|
|
Ethernet dongles.
|
|
|
|
See: https://github.com/raspberrypi/linux/issues/2990
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/Makefile | 1 +
|
|
arch/arm/boot/dts/bcm2708-rpi-zero.dts | 117 +++++++++++++++++++++++++
|
|
2 files changed, 118 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/bcm2708-rpi-zero.dts
|
|
|
|
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
|
|
bcm2708-rpi-b.dtb \
|
|
bcm2708-rpi-b-plus.dtb \
|
|
bcm2708-rpi-cm.dtb \
|
|
+ bcm2708-rpi-zero.dtb \
|
|
bcm2708-rpi-zero-w.dtb \
|
|
bcm2709-rpi-2-b.dtb \
|
|
bcm2710-rpi-3-b.dtb \
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-zero.dts
|
|
@@ -0,0 +1,117 @@
|
|
+/dts-v1/;
|
|
+
|
|
+#include "bcm2708.dtsi"
|
|
+#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
+
|
|
+/ {
|
|
+ compatible = "raspberrypi,model-zero", "brcm,bcm2835";
|
|
+ model = "Raspberry Pi Zero";
|
|
+
|
|
+ chosen {
|
|
+ bootargs = "coherent_pool=1M";
|
|
+ };
|
|
+};
|
|
+
|
|
+&gpio {
|
|
+ spi0_pins: spi0_pins {
|
|
+ brcm,pins = <9 10 11>;
|
|
+ brcm,function = <4>; /* alt0 */
|
|
+ };
|
|
+
|
|
+ spi0_cs_pins: spi0_cs_pins {
|
|
+ brcm,pins = <8 7>;
|
|
+ brcm,function = <1>; /* output */
|
|
+ };
|
|
+
|
|
+ i2c0_pins: i2c0 {
|
|
+ brcm,pins = <0 1>;
|
|
+ brcm,function = <4>;
|
|
+ };
|
|
+
|
|
+ i2c1_pins: i2c1 {
|
|
+ brcm,pins = <2 3>;
|
|
+ brcm,function = <4>;
|
|
+ };
|
|
+
|
|
+ i2s_pins: i2s {
|
|
+ brcm,pins = <18 19 20 21>;
|
|
+ brcm,function = <4>; /* alt0 */
|
|
+ };
|
|
+
|
|
+ audio_pins: audio_pins {
|
|
+ brcm,pins = <>;
|
|
+ brcm,function = <>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&uart0 {
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&spi0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
|
|
+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
|
|
+
|
|
+ spidev0: spidev@0{
|
|
+ compatible = "spidev";
|
|
+ reg = <0>; /* CE0 */
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ spi-max-frequency = <125000000>;
|
|
+ };
|
|
+
|
|
+ spidev1: spidev@1{
|
|
+ compatible = "spidev";
|
|
+ reg = <1>; /* CE1 */
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ spi-max-frequency = <125000000>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&i2c0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&i2c0_pins>;
|
|
+ clock-frequency = <100000>;
|
|
+};
|
|
+
|
|
+&i2c1 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&i2c1_pins>;
|
|
+ clock-frequency = <100000>;
|
|
+};
|
|
+
|
|
+&i2c2 {
|
|
+ clock-frequency = <100000>;
|
|
+};
|
|
+
|
|
+&i2s {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&i2s_pins>;
|
|
+};
|
|
+
|
|
+&leds {
|
|
+ act_led: act {
|
|
+ label = "led0";
|
|
+ linux,default-trigger = "mmc0";
|
|
+ gpios = <&gpio 47 0>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&hdmi {
|
|
+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
|
+};
|
|
+
|
|
+&audio {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&audio_pins>;
|
|
+};
|
|
+
|
|
+/ {
|
|
+ __overrides__ {
|
|
+ act_led_gpio = <&act_led>,"gpios:4";
|
|
+ act_led_activelow = <&act_led>,"gpios:8";
|
|
+ act_led_trigger = <&act_led>,"linux,default-trigger";
|
|
+ };
|
|
+};
|