mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 08:51:13 +00:00
97 lines
3.4 KiB
Diff
97 lines
3.4 KiB
Diff
From 76a9fed9e5580945827a82963ac7315186fd0ebe Mon Sep 17 00:00:00 2001
|
|
From: Luka Perkov <luka@openwrt.org>
|
|
Date: Mon, 11 Nov 2013 06:45:44 +0100
|
|
Subject: [PATCH 1/9] cosmetic: kirkwood: style fixes in kwbimage.cfg files
|
|
|
|
When diffing through the changes only the relevant changes
|
|
should be displayed.
|
|
|
|
Signed-off-by: Luka Perkov <luka@openwrt.org>
|
|
---
|
|
board/iomega/iconnect/kwbimage.cfg | 4 ++--
|
|
board/raidsonic/ib62x0/kwbimage.cfg | 22 +++++++++++-----------
|
|
2 files changed, 13 insertions(+), 13 deletions(-)
|
|
|
|
--- a/board/iomega/iconnect/kwbimage.cfg
|
|
+++ b/board/iomega/iconnect/kwbimage.cfg
|
|
@@ -20,7 +20,7 @@ NAND_PAGE_SIZE 0x0800
|
|
# Configure RGMII-0 interface pad voltage to 1.8V
|
|
DATA 0xffd100e0 0x1b1b1b9b
|
|
|
|
-#Dram initalization for SINGLE x16 CL=5 @ 400MHz
|
|
+# Dram initalization for SINGLE x16 CL=5 @ 400MHz
|
|
DATA 0xffd01400 0x43000c30 # DDR Configuration register
|
|
# bit13-0: 0xc30, (3120 DDR2 clks refresh rate)
|
|
# bit23-14: 0x0,
|
|
@@ -87,7 +87,7 @@ DATA 0xffd0141c 0x00000c52 # DDR Mode
|
|
# bit6-4: 0x4, CL=5
|
|
# bit7: 0x0, TestMode=0 normal
|
|
# bit8: 0x0, DLL reset=0 normal
|
|
-# bit11-9: 0x6, auto-precharge write recovery ????????????
|
|
+# bit11-9: 0x6, auto-precharge write recovery
|
|
# bit12: 0x0, PD must be zero
|
|
# bit31-13: 0x0, required
|
|
|
|
--- a/board/raidsonic/ib62x0/kwbimage.cfg
|
|
+++ b/board/raidsonic/ib62x0/kwbimage.cfg
|
|
@@ -11,7 +11,7 @@
|
|
#
|
|
|
|
# Boot Media configurations
|
|
-BOOT_FROM nand # change from nand to uart if building UART image
|
|
+BOOT_FROM nand
|
|
NAND_ECC_MODE default
|
|
NAND_PAGE_SIZE 0x0800
|
|
|
|
@@ -21,12 +21,12 @@ NAND_PAGE_SIZE 0x0800
|
|
# Configure RGMII-0 interface pad voltage to 1.8V
|
|
DATA 0xffd100e0 0x1b1b1b9b
|
|
|
|
-#Dram initalization for SINGLE x16 CL=5 @ 400MHz
|
|
+# Dram initalization for SINGLE x16 CL=5 @ 400MHz
|
|
DATA 0xffd01400 0x43000c30 # DDR Configuration register
|
|
# bit13-0: 0xc30, (3120 DDR2 clks refresh rate)
|
|
# bit23-14: 0x0,
|
|
-# bit24: 0x1, enable exit self refresh mode on DDR access
|
|
-# bit25: 0x1, required
|
|
+# bit24: 0x1, enable exit self refresh mode on DDR access
|
|
+# bit25: 0x1, required
|
|
# bit29-26: 0x0,
|
|
# bit31-30: 0x1,
|
|
|
|
@@ -64,10 +64,10 @@ DATA 0xffd01410 0x0000000c # DDR Address
|
|
# bit3-2: 11, Cs0size (1Gb)
|
|
# bit5-4: 00, Cs1width (x8)
|
|
# bit7-6: 11, Cs1size (1Gb)
|
|
-# bit9-8: 00, Cs2width (nonexistent
|
|
-# bit11-10: 00, Cs2size (nonexistent
|
|
-# bit13-12: 00, Cs3width (nonexistent
|
|
-# bit15-14: 00, Cs3size (nonexistent
|
|
+# bit9-8: 00, Cs2width (nonexistent)
|
|
+# bit11-10: 00, Cs2size (nonexistent)
|
|
+# bit13-12: 00, Cs3width (nonexistent)
|
|
+# bit15-14: 00, Cs3size (nonexistent)
|
|
# bit16: 0, Cs0AddrSel
|
|
# bit17: 0, Cs1AddrSel
|
|
# bit18: 0, Cs2AddrSel
|
|
@@ -88,7 +88,7 @@ DATA 0xffd0141c 0x00000c52 # DDR Mode
|
|
# bit6-4: 0x4, CL=5
|
|
# bit7: 0x0, TestMode=0 normal
|
|
# bit8: 0x0, DLL reset=0 normal
|
|
-# bit11-9: 0x6, auto-precharge write recovery ????????????
|
|
+# bit11-9: 0x6, auto-precharge write recovery
|
|
# bit12: 0x0, PD must be zero
|
|
# bit31-13: 0x0, required
|
|
|
|
@@ -148,8 +148,8 @@ DATA 0xffd0149c 0x0000e803 # CPU ODT Con
|
|
DATA 0xffd01480 0x00000001 # DDR Initialization Control
|
|
# bit0: 0x1, enable DDR init upon this register write
|
|
|
|
-DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register
|
|
-DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register
|
|
+DATA 0xffd20134 0x66666666 # L2 RAM Timing 0 Register
|
|
+DATA 0xffd20138 0x66666666 # L2 RAM Timing 1 Register
|
|
|
|
# End of Header extension
|
|
DATA 0x0 0x0
|