mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 06:57:57 +00:00
8299d1f057
Rebased RPi foundation patches on linux 5.10.59, removed applied and reverted patches, wireless patches and defconfig patches. bcm2708: boot tested on RPi B+ v1.2 bcm2709: boot tested on RPi 4B v1.1 4G bcm2711: boot tested on RPi 4B v1.1 4G Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
43 lines
1.7 KiB
Diff
43 lines
1.7 KiB
Diff
From 76eb23d534419db5e794699ae77f1e644f975e8c Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.com>
|
|
Date: Sun, 25 Apr 2021 21:07:03 +0100
|
|
Subject: [PATCH] overlays: Allow multiple gpio-shutdown instances
|
|
|
|
There is no reason not to support multiple gpio-shutdown signals,
|
|
so add the necessary __override__ magic.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|
---
|
|
arch/arm/boot/dts/overlays/gpio-shutdown-overlay.dts | 6 ++++--
|
|
1 file changed, 4 insertions(+), 2 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/gpio-shutdown-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/gpio-shutdown-overlay.dts
|
|
@@ -24,7 +24,7 @@
|
|
// by a "pinctrl client", as is done below. See:
|
|
// https://www.kernel.org/doc/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
|
|
// https://www.kernel.org/doc/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
|
|
- pin_state: shutdown_button_pins {
|
|
+ pin_state: shutdown_button_pins@3 {
|
|
brcm,pins = <3>; // gpio number
|
|
brcm,function = <0>; // 0 = input, 1 = output
|
|
brcm,pull = <2>; // 0 = none, 1 = pull down, 2 = pull up
|
|
@@ -35,7 +35,7 @@
|
|
// Add a new device to the /soc devicetree node
|
|
target-path = "/soc";
|
|
__overlay__ {
|
|
- shutdown_button {
|
|
+ shutdown_button: shutdown_button@3 {
|
|
// Let the gpio-keys driver handle this device. See:
|
|
// https://www.kernel.org/doc/Documentation/devicetree/bindings/input/gpio-keys.txt
|
|
compatible = "gpio-keys";
|
|
@@ -69,6 +69,8 @@
|
|
__overrides__ {
|
|
// Allow overriding the GPIO number.
|
|
gpio_pin = <&button>,"gpios:4",
|
|
+ <&shutdown_button>,"reg:0",
|
|
+ <&pin_state>,"reg:0",
|
|
<&pin_state>,"brcm,pins:0";
|
|
|
|
// Allow changing the internal pullup/down state. 0 = none, 1 = pulldown, 2 = pullup
|