openwrt/target/linux/bmips/dts/bcm6368-netgear-dgnd3700.dtsi
Daniel González Cabanelas ed79519b8d bmips: add support for Netgear DGND3700 v1, DGND3800B
The Netgear DGND3700 v1 and DGND3800B are the same device but with
different factory firmwares. It's an xDSL wifi router with a slim black
shiny casing and 4 PCB internal antennas connected via UFL to a miniPCI
detachable card.

Hardware:
 - SoC: Broadcom BCM6368
 - CPU: dual core BMIPS4350 V3.1 @400Mhz
 - RAM: 128 MB DDR
 - NOR Flash: 32 MB parallel (CFE and OS)
 - NAND flash: 128 MB (empty)
 - Ethernet LAN: 5x 1Gbit
 - Wifi 2.4 GHz: Broadcom BCM43222 802.11bgn
 - Wifi 5 GHz: Broadcom BCM43222 802.11abgn
 - USB: 2x 2.0
 - Buttons: 3x, 1 reset
 - LEDs: 11x
 - UART: yes

Installation via OEM web UI:
  1. Open the Netgear administration web interface, by default:
        http://192.168.0.1
	user: admin
        password: password
  2. Look for "upgrade firmware" and proceed
  3. Wait some minutes until it finishes

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
2023-06-10 15:37:52 +02:00

267 lines
3.8 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later
#include "bcm6368.dtsi"
/ {
aliases {
led-boot = &led_power_green;
led-failsafe = &led_power_red;
led-running = &led_power_green;
led-upgrade = &led_power_green;
};
keys {
compatible = "gpio-keys-polled";
poll-interval = <100>;
rfkill {
label = "rfkill";
gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
debounce-interval = <60>;
};
reset {
label = "reset";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
debounce-interval = <60>;
};
wps {
label = "wps";
gpios = <&gpio 35 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
debounce-interval = <60>;
};
};
leds {
compatible = "gpio-leds";
led@2 {
label = "green:dsl";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
};
led@4 {
label = "red:wan";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
led@5 {
label = "green:wan";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
led@11 {
label = "green:wps";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
/* usb front */
led@13 {
label = "green:usb2";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
/* usb back */
led@14 {
label = "green:usb1";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
led_power_red: led@22 {
label = "red:power";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
panic-indicator;
};
led@23 {
label = "green:lan";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
};
led_power_green: led@24 {
label = "green:power";
gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
default-state = "on";
};
led@26 {
label = "green:wifi2g";
gpios = <&gpio 26 GPIO_ACTIVE_LOW>;
};
led@27 {
label = "blue:wifi5g";
gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
};
};
};
&ehci {
status = "okay";
};
&ethernet {
status = "okay";
nvmem-cells = <&macaddr_cfe_6a0>;
nvmem-cell-names = "mac-address";
};
&lsspi {
status = "okay";
switch@1 {
compatible = "brcm,bcm53115";
reg = <1>;
spi-max-frequency = <781000>;
dsa,member = <1 0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
wan@0 {
reg = <0>;
label = "wan";
};
port@1 {
reg = <1>;
label = "lan4";
};
port@2 {
reg = <2>;
label = "lan3";
};
port@3 {
reg = <3>;
label = "lan2";
};
port@4 {
reg = <4>;
label = "lan1";
};
port@8 {
reg = <8>;
phy-mode = "rgmii";
ethernet = <&switch0port5>;
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
};
&nflash {
status = "okay";
nandcs@0 {
compatible = "brcm,nandcs";
reg = <0>;
nand-ecc-step-size = <512>;
nand-ecc-strength = <15>;
nand-on-flash-bbt;
brcm,nand-oob-sector-size = <64>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "storage";
reg = <0 0>; /* autodetected size */
};
};
};
};
&ohci {
status = "okay";
};
&pci {
status = "okay";
};
&pflash {
status = "okay";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
cfe: partition@0 {
label = "CFE";
reg = <0x0000000 0x0020000>;
read-only;
};
partition@20000 {
compatible = "brcm,bcm963xx-imagetag";
label = "firmware";
reg = <0x0020000 0x1e20000>;
};
partition@1e40000 {
label = "board_data";
reg = <0x1e40000 0x1a0000>;
read-only;
};
partition@1fe0000 {
label = "nvram";
reg = <0x1fe0000 0x020000>;
};
};
};
&switch0 {
dsa,member = <0 0>;
ports {
switch0port5: port@5 {
reg = <5>;
label = "extsw";
phy-mode = "rgmii";
fixed-link {
speed = <1000>;
full-duplex;
};
};
};
};
&uart0 {
status = "okay";
};
&usbh {
status = "okay";
};
&cfe {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_cfe_6a0: macaddr@6a0 {
reg = <0x6a0 0x6>;
};
};