David Bauer 1724d4e9ed ath79: add support for devolo WiFi pro 1200e ... Hardware -------- CPU: Qualcomm Atheros QCA9558 RAM: 128M DDR2 FLASH: 16MiB ETH: 1x Atheros AR8035 (PoE in) 1x Atheros AR8033 WiFi2: QCA9558 2T2R WiFi5: QCA9880 2T2R BTN: 1x Reset LED: 1x LED blue 1x LED red BEEP: 1x GPIO attached piezo beeper UART: 3.3V GND TX RX (115200-N-8) (3.3V is square pad) Header is located next to reset-button Installation ------------ Make sure you set a password for the root user as prompted on first setup! 1. Upload OpenWRT sysupgrade image via SSH to the device. Use /tmp as the destination folder on the device. User is root, password the one set in the web interface. 2. Install OpenWRT with > sysupgrade -n -F /tmp/<openwrt-image-name> Signed-off-by: David Bauer <mail@david-bauer.net>		2018-12-27 14:06:38 +01:00
..
10-ath9k-eeprom	ath79: add support for NEC Aterm WG800HP	2018-12-24 19:18:07 +01:00
11-ath10k-caldata	ath79: add support for devolo WiFi pro 1200e	2018-12-27 14:06:38 +01:00