Stijn Segers 171d8bce0c ramips: remove factory image for TP-Link Archer C2 v1 ... Initial commit 8375623a06 ("ramips: add support for TP-Link Archer C2") contains detailed installation instructions, which do not mention a factory image. From what I can see, no support to install OpenWrt through the vendor web interface has been added since. The factory image is also conspicuously absent from the device page in the wiki. Yet, it is available for download. I bricked my Archer C2 loading the factory image through the web UI. Serial showed this error during bootloop: Uncompressing Kernel Image ... LZMA ERROR 1 - must RESET board to recover This patch disables the undocumented factory image so users won't get tricked into thinking easy web UI flashing actually works. Signed-off-by: Stijn Segers <foss@volatilesystems.org> (backported from commit ad5e29d38a)		2021-02-14 18:56:05 +01:00
..
lzma-loader	ramips: Add support for mt7621 to lzma-loader	2018-06-21 06:54:42 +02:00
Makefile	ramips: allow JCG_MAXSIZE in kiB in Build/jcg-header	2019-12-13 19:54:14 +01:00
mt76x8.mk	ramips: enable flashing WizFi630S via OEM firmware	2020-08-08 16:36:24 +02:00
mt7620.mk	ramips: remove factory image for TP-Link Archer C2 v1	2021-02-14 18:56:05 +01:00
mt7621.mk	ramips: append tail to WF2881 initramfs image	2020-02-21 14:12:30 +01:00
rt288x.mk	ramips: use patch-dtb for F5D8235 V1	2018-04-23 22:07:22 +02:00
rt305x.mk	ramips: add kmod-usb-dwc2 to ZyXEL Keenetic image	2020-08-02 13:42:49 +02:00
rt3883.mk	ramips: reenable image creation for the D-Link DIR-645	2020-02-01 18:52:03 +01:00