mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 22:23:27 +00:00
967520800a
This enables the HW Random Number Generator on the BCM6362 and BCM63268 SoCs, which is the same one used on BCM6368 SoC. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
616 lines
12 KiB
Plaintext
616 lines
12 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/clock/bcm6362-clock.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/bcm6362-interrupt-controller.h>
|
|
#include <dt-bindings/reset/bcm6362-reset.h>
|
|
#include <dt-bindings/soc/bcm6362-pm.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "brcm,bcm6362";
|
|
|
|
aliases {
|
|
nflash = &nflash;
|
|
pinctrl = &pinctrl;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
spi0 = &lsspi;
|
|
spi1 = &hsspi;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "earlycon";
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
clocks {
|
|
periph_osc: periph-osc {
|
|
compatible = "fixed-clock";
|
|
|
|
#clock-cells = <0>;
|
|
|
|
clock-frequency = <50000000>;
|
|
clock-output-names = "periph";
|
|
};
|
|
|
|
hsspi_osc: hsspi-osc {
|
|
compatible = "fixed-clock";
|
|
|
|
#clock-cells = <0>;
|
|
|
|
clock-frequency = <400000000>;
|
|
clock-output-names = "hsspi_osc";
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
mips-hpt-frequency = <200000000>;
|
|
|
|
cpu@0 {
|
|
compatible = "brcm,bmips4350", "mips,mips4Kc";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
|
|
cpu@1 {
|
|
compatible = "brcm,bmips4350", "mips,mips4Kc";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
cpu_intc: interrupt-controller {
|
|
#address-cells = <0>;
|
|
compatible = "mti,cpu-interrupt-controller";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0 0>;
|
|
};
|
|
|
|
ubus {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
compatible = "simple-bus";
|
|
ranges;
|
|
|
|
periph_clk: clock-controller@10000004 {
|
|
compatible = "brcm,bcm6362-clocks";
|
|
reg = <0x10000004 0x4>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pll_cntl: syscon@10000008 {
|
|
compatible = "syscon", "simple-mfd";
|
|
reg = <0x10000008 0x4>;
|
|
native-endian;
|
|
|
|
syscon-reboot {
|
|
compatible = "syscon-reboot";
|
|
offset = <0x0>;
|
|
mask = <0x1>;
|
|
};
|
|
};
|
|
|
|
periph_rst: reset-controller@10000010 {
|
|
compatible = "brcm,bcm6345-reset";
|
|
reg = <0x10000010 0x4>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
ext_intc: interrupt-controller@10000018 {
|
|
#address-cells = <1>;
|
|
compatible = "brcm,bcm6345-ext-intc";
|
|
reg = <0x10000018 0x4>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6362_IRQ_EXT0>,
|
|
<BCM6362_IRQ_EXT1>,
|
|
<BCM6362_IRQ_EXT2>,
|
|
<BCM6362_IRQ_EXT3>;
|
|
};
|
|
|
|
periph_intc: interrupt-controller@10000020 {
|
|
#address-cells = <1>;
|
|
compatible = "brcm,bcm6345-l1-intc";
|
|
reg = <0x10000020 0x10>,
|
|
<0x10000030 0x10>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
interrupt-parent = <&cpu_intc>;
|
|
interrupts = <2>, <3>;
|
|
};
|
|
|
|
wdt: watchdog@1000005c {
|
|
compatible = "brcm,bcm7038-wdt";
|
|
reg = <0x1000005c 0xc>;
|
|
|
|
clocks = <&periph_osc>;
|
|
|
|
timeout-sec = <30>;
|
|
};
|
|
|
|
gpio_cntl: syscon@10000080 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "brcm,bcm6362-gpio-sysctl",
|
|
"syscon", "simple-mfd";
|
|
reg = <0x10000080 0x80>;
|
|
ranges = <0 0x10000080 0x80>;
|
|
native-endian;
|
|
|
|
gpio: gpio@0 {
|
|
compatible = "brcm,bcm6362-gpio";
|
|
reg-names = "dirout", "dat";
|
|
reg = <0x0 0x8>, <0x8 0x8>;
|
|
|
|
gpio-controller;
|
|
gpio-ranges = <&pinctrl 0 0 48>;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
pinctrl: pinctrl@18 {
|
|
compatible = "brcm,bcm6362-pinctrl";
|
|
reg = <0x18 0x10>, <0x38 0x4>;
|
|
|
|
pinctrl_usb_device_led: usb_device_led-pins {
|
|
function = "usb_device_led";
|
|
pins = "gpio0";
|
|
};
|
|
|
|
pinctrl_sys_irq: sys_irq-pins {
|
|
function = "sys_irq";
|
|
pins = "gpio1";
|
|
};
|
|
|
|
pinctrl_serial_led: serial_led-pins {
|
|
pinctrl_serial_led_clk: serial_led_clk-pins {
|
|
function = "serial_led_clk";
|
|
pins = "gpio2";
|
|
};
|
|
|
|
pinctrl_serial_led_data: serial_led_data-pins {
|
|
function = "serial_led_data";
|
|
pins = "gpio3";
|
|
};
|
|
};
|
|
|
|
pinctrl_robosw_led_data: robosw_led_data-pins {
|
|
function = "robosw_led_data";
|
|
pins = "gpio4";
|
|
};
|
|
|
|
pinctrl_robosw_led_clk: robosw_led_clk-pins {
|
|
function = "robosw_led_clk";
|
|
pins = "gpio5";
|
|
};
|
|
|
|
pinctrl_robosw_led0: robosw_led0-pins {
|
|
function = "robosw_led0";
|
|
pins = "gpio6";
|
|
};
|
|
|
|
pinctrl_robosw_led1: robosw_led1-pins {
|
|
function = "robosw_led1";
|
|
pins = "gpio7";
|
|
};
|
|
|
|
pinctrl_inet_led: inet_led-pins {
|
|
function = "inet_led";
|
|
pins = "gpio8";
|
|
};
|
|
|
|
pinctrl_spi_cs2: spi_cs2-pins {
|
|
function = "spi_cs2";
|
|
pins = "gpio9";
|
|
};
|
|
|
|
pinctrl_spi_cs3: spi_cs3-pins {
|
|
function = "spi_cs3";
|
|
pins = "gpio10";
|
|
};
|
|
|
|
pinctrl_ntr_pulse: ntr_pulse-pins {
|
|
function = "ntr_pulse";
|
|
pins = "gpio11";
|
|
};
|
|
|
|
pinctrl_uart1_scts: uart1_scts-pins {
|
|
function = "uart1_scts";
|
|
pins = "gpio12";
|
|
};
|
|
|
|
pinctrl_uart1_srts: uart1_srts-pins {
|
|
function = "uart1_srts";
|
|
pins = "gpio13";
|
|
};
|
|
|
|
pinctrl_uart1: uart1-pins {
|
|
pinctrl_uart1_sdin: uart1_sdin-pins {
|
|
function = "uart1_sdin";
|
|
pins = "gpio14";
|
|
};
|
|
|
|
pinctrl_uart1_sdout: uart1_sdout-pins {
|
|
function = "uart1_sdout";
|
|
pins = "gpio15";
|
|
};
|
|
};
|
|
|
|
pinctrl_adsl_spi: adsl_spi-pins {
|
|
pinctrl_adsl_spi_miso: adsl_spi_miso-pins {
|
|
function = "adsl_spi_miso";
|
|
pins = "gpio16";
|
|
};
|
|
|
|
pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins {
|
|
function = "adsl_spi_mosi";
|
|
pins = "gpio17";
|
|
};
|
|
|
|
pinctrl_adsl_spi_clk: adsl_spi_clk-pins {
|
|
function = "adsl_spi_clk";
|
|
pins = "gpio18";
|
|
};
|
|
|
|
pinctrl_adsl_spi_cs: adsl_spi_cs-pins {
|
|
function = "adsl_spi_cs";
|
|
pins = "gpio19";
|
|
};
|
|
};
|
|
|
|
pinctrl_ephy0_led: ephy0_led-pins {
|
|
function = "ephy0_led";
|
|
pins = "gpio20";
|
|
};
|
|
|
|
pinctrl_ephy1_led: ephy1_led-pins {
|
|
function = "ephy1_led";
|
|
pins = "gpio21";
|
|
};
|
|
|
|
pinctrl_ephy2_led: ephy2_led-pins {
|
|
function = "ephy2_led";
|
|
pins = "gpio22";
|
|
};
|
|
|
|
pinctrl_ephy3_led: ephy3_led-pins {
|
|
function = "ephy3_led";
|
|
pins = "gpio23";
|
|
};
|
|
|
|
pinctrl_ext_irq0: ext_irq0-pins {
|
|
function = "ext_irq0";
|
|
pins = "gpio24";
|
|
};
|
|
|
|
pinctrl_ext_irq1: ext_irq1-pins {
|
|
function = "ext_irq1";
|
|
pins = "gpio25";
|
|
};
|
|
|
|
pinctrl_ext_irq2: ext_irq2-pins {
|
|
function = "ext_irq2";
|
|
pins = "gpio26";
|
|
};
|
|
|
|
pinctrl_ext_irq3: ext_irq3-pins {
|
|
function = "ext_irq3";
|
|
pins = "gpio27";
|
|
};
|
|
|
|
pinctrl_nand: nand-pins {
|
|
function = "nand";
|
|
group = "nand_grp";
|
|
};
|
|
};
|
|
};
|
|
|
|
uart0: serial@10000100 {
|
|
compatible = "brcm,bcm6345-uart";
|
|
reg = <0x10000100 0x18>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6362_IRQ_UART0>;
|
|
|
|
clocks = <&periph_osc>;
|
|
clock-names = "periph";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@10000120 {
|
|
compatible = "brcm,bcm6345-uart";
|
|
reg = <0x10000120 0x18>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6362_IRQ_UART1>;
|
|
|
|
clocks = <&periph_osc>;
|
|
clock-names = "periph";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
nflash: nand@10000200 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "brcm,nand-bcm6368",
|
|
"brcm,brcmnand-v2.2",
|
|
"brcm,brcmnand";
|
|
reg = <0x10000200 0x180>,
|
|
<0x10000600 0x200>,
|
|
<0x10000070 0x10>;
|
|
reg-names = "nand",
|
|
"nand-cache",
|
|
"nand-int-base";
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6362_IRQ_NAND>;
|
|
|
|
clocks = <&periph_clk BCM6362_CLK_NAND>;
|
|
clock-names = "nand";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_nand>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
lsspi: spi@10000800 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "brcm,bcm6358-spi";
|
|
reg = <0x10000800 0x70c>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6362_IRQ_LSSPI>;
|
|
|
|
clocks = <&periph_clk BCM6362_CLK_SPI>;
|
|
clock-names = "spi";
|
|
|
|
resets = <&periph_rst BCM6362_RST_SPI>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
hsspi: spi@10001000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "brcm,bcm6328-hsspi";
|
|
reg = <0x10001000 0x600>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6362_IRQ_HSSPI>;
|
|
|
|
clocks = <&periph_clk BCM6362_CLK_HSSPI>,
|
|
<&hsspi_osc>;
|
|
clock-names = "hsspi",
|
|
"pll";
|
|
|
|
resets = <&periph_rst BCM6362_RST_SPI>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
serdes_cntl: syscon@10001804 {
|
|
compatible = "syscon";
|
|
reg = <0x10001804 0x4>;
|
|
native-endian;
|
|
};
|
|
|
|
periph_pwr: power-controller@10001848 {
|
|
compatible = "brcm,bcm6362-power-controller";
|
|
reg = <0x10001848 0x4>;
|
|
#power-domain-cells = <1>;
|
|
};
|
|
|
|
leds: led-controller@10001900 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "brcm,bcm6328-leds";
|
|
reg = <0x10001900 0x24>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ehci: usb@10002500 {
|
|
compatible = "brcm,bcm6362-ehci", "generic-ehci";
|
|
reg = <0x10002500 0x100>;
|
|
big-endian;
|
|
spurious-oc;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6362_IRQ_EHCI>;
|
|
|
|
phys = <&usbh 0>;
|
|
phy-names = "usb";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
ohci: usb@10002600 {
|
|
compatible = "brcm,bcm6362-ohci", "generic-ohci";
|
|
reg = <0x10002600 0x100>;
|
|
big-endian;
|
|
no-big-frame-no;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6362_IRQ_OHCI>;
|
|
|
|
phys = <&usbh 0>;
|
|
phy-names = "usb";
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh: usb-phy@10002700 {
|
|
compatible = "brcm,bcm6362-usbh-phy";
|
|
reg = <0x10002700 0x38>;
|
|
|
|
#phy-cells = <1>;
|
|
|
|
clocks = <&periph_clk BCM6362_CLK_USBH>;
|
|
clock-names = "usbh";
|
|
|
|
power-domains = <&periph_pwr BCM6362_POWER_DOMAIN_USBH>;
|
|
resets = <&periph_rst BCM6362_RST_USBH>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
random: rng@10002880 {
|
|
compatible = "brcm,bcm6368-rng";
|
|
reg = <0x10002880 0x14>;
|
|
|
|
clocks = <&periph_clk BCM6362_CLK_IPSEC>;
|
|
clock-names = "ipsec";
|
|
|
|
resets = <&periph_rst BCM6362_RST_IPSEC>;
|
|
|
|
power-domains = <&periph_pwr BCM6362_POWER_DOMAIN_IPSEC>;
|
|
};
|
|
|
|
ethernet: ethernet@1000d800 {
|
|
compatible = "brcm,bcm6362-enetsw";
|
|
reg = <0x1000d800 0x80>,
|
|
<0x1000da00 0x80>,
|
|
<0x1000dc00 0x80>;
|
|
reg-names = "dma",
|
|
"dma-channels",
|
|
"dma-sram";
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6362_IRQ_ENETSW_RX_DMA0>;
|
|
interrupt-names = "rx";
|
|
|
|
clocks = <&periph_clk BCM6362_CLK_SWPKT_USB>,
|
|
<&periph_clk BCM6362_CLK_SWPKT_SAR>,
|
|
<&periph_clk BCM6362_CLK_ROBOSW>;
|
|
|
|
resets = <&periph_rst BCM6362_RST_ENETSW>,
|
|
<&periph_rst BCM6362_RST_EPHY>;
|
|
|
|
power-domains = <&periph_pwr BCM6362_POWER_DOMAIN_ROBOSW>,
|
|
<&periph_pwr BCM6362_POWER_DOMAIN_GMII_PADS>;
|
|
|
|
dma-rx = <0>;
|
|
dma-tx = <1>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
switch0: switch@10e00000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "brcm,bcm6362-switch";
|
|
reg = <0x10e00000 0x8000>;
|
|
big-endian;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@8 {
|
|
reg = <8>;
|
|
|
|
phy-mode = "internal";
|
|
ethernet = <ðernet>;
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
mdio: mdio@10e000b0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "brcm,bcm6368-mdio-mux";
|
|
reg = <0x10e000b0 0x8>;
|
|
|
|
mdio_int: mdio@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
|
|
phy1: ethernet-phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <1>;
|
|
};
|
|
|
|
phy2: ethernet-phy@2 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <2>;
|
|
};
|
|
|
|
phy3: ethernet-phy@3 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <3>;
|
|
};
|
|
|
|
phy4: ethernet-phy@4 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <4>;
|
|
};
|
|
};
|
|
|
|
mdio_ext: mdio@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
pcie: pcie@10e40000 {
|
|
compatible = "brcm,bcm6328-pcie";
|
|
reg = <0x10e40000 0x10000>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
|
|
device_type = "pci";
|
|
bus-range = <0x00 0x01>;
|
|
ranges = <0x2000000 0 0x10f00000 0x10f00000 0 0x100000>;
|
|
linux,pci-probe-only = <1>;
|
|
|
|
interrupt-parent = <&periph_intc>;
|
|
interrupts = <BCM6362_IRQ_PCIE_RC>;
|
|
|
|
clocks = <&periph_clk BCM6362_CLK_PCIE>;
|
|
clock-names = "pcie";
|
|
|
|
resets = <&periph_rst BCM6362_RST_PCIE>,
|
|
<&periph_rst BCM6362_RST_PCIE_EXT>,
|
|
<&periph_rst BCM6362_RST_PCIE_CORE>;
|
|
reset-names = "pcie",
|
|
"pcie-ext",
|
|
"pcie-core";
|
|
|
|
power-domains = <&periph_pwr BCM6362_POWER_DOMAIN_PCIE>;
|
|
|
|
brcm,serdes = <&serdes_cntl>;
|
|
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|