openwrt/target/linux
David Bauer 16b01fb1b9 mpc85xx: add support for Enterasys WS-AP3710i
Hardware
--------

SoC:   NXP P1020 (2x e500 @ 800MHz)
RAM:   256M DDR3 (Micron)
FLASH: 32M NOR (Spansion S29GL128S)
BTN:   1x Reset
WiFi:  1x Atheros AR9590 2.4 bgn 3x3
       2x Atheros AR9590 5.0 an 3x3
ETH:   1x Gigabit Ethernet (Atheros AR8033)
LED:   System (green/red) - Radio{0,1} (green)
       LAN (connected to PHY)
        - GE blue
        - FE green

Serial is a Cisco-compatible RJ45 next to the ethernet port.
115200-N-8 are the settings for OS and U-Boot.

Installation
------------

1. Grab the OpenWrt initramfs, rename it to 01C8A8C0.img. Place it in
   the root directory of a TFTP server and serve it at
   192.168.200.200/24.

2. Connect to the serial port and boot the AP. Stop autoboot in U-Boot
   by pressing Enter when prompted. Credentials are identical to the one
   in the APs interface. By default it is admin / new2day.

3. Set the bootcmd so the AP can boot OpenWrt by executing

   $ setenv boot_openwrt "setenv bootargs;
     cp.b 0xee000000 0x1000000 0x1000000; bootm 0x1000000"
   $ setenv bootcmd "run boot_openwrt"
   $ saveenv

   If you plan on going back to the vendor firmware - the bootcmd for it
   is stored in the boot_flash variable.

4. Load the initramfs image to RAM and boot by executing

   $ tftpboot 0x1000000 192.168.200.200:01C8A8C0.img; bootm

5. Make a backup of the "firmware" partition if you ever wish to go back
   to the vendor firmware.

6. Upload the OpenWrt sysupgrade image via SCP to the devices /tmp
   folder.

7. Flash OpenWrt using sysupgrade.

   $ sysupgrade -n /tmp/openwrt-sysupgrade.bin

Signed-off-by: David Bauer <mail@david-bauer.net>
2019-12-13 22:40:19 +01:00
..
apm821xx treewide: kernel config: remove runtime options 2019-11-24 14:19:43 +01:00
ar7 kernel: bump 4.9 to 4.9.194 2019-09-24 12:52:05 +02:00
ar71xx kernel: bump 4.14 to 4.14.158 2019-12-10 09:50:42 +01:00
arc770 treewide: remove kmod-usb-core from DEVICE_PACKAGES 2019-10-06 21:28:49 +02:00
archs38 treewide: remove kmod-usb-core from DEVICE_PACKAGES 2019-10-06 21:28:49 +02:00
armvirt armvirt: fix overlay support by updating to f2fs/ext4 based overlays 2019-06-25 14:12:22 +00:00
at91 at91: disable legacy PTYs and virtual terminals 2019-12-09 20:14:17 +01:00
ath25 ath25: split up DEVICE_TITLE 2019-10-19 13:16:57 +02:00
ath79 ath79: add support for TP-Link TL-WDR4300 v1 (IL) 2019-12-12 14:42:05 +01:00
bcm53xx bcm53xx: sysupgrade: support Luxul NAND devices 2019-10-15 20:23:04 +02:00
brcm47xx brcm47xx: add switch configuration for WNR3500L 2019-12-08 00:21:36 +01:00
brcm63xx kernel: bump 4.19 to 4.19.85 2019-11-22 16:56:46 +01:00
brcm2708 kernel: bump 4.19 to 4.19.88 2019-12-10 09:50:42 +01:00
cns3xxx kernel: bump 4.19 to 4.19.86 2019-11-29 09:59:49 +01:00
gemini kernel: bump 4.19 to 4.19.88 2019-12-10 09:50:42 +01:00
generic kernel: bump 4.19 to 4.19.88 2019-12-10 09:50:42 +01:00
imx6 imx6: install-dtb as separate IMAGE 2019-09-15 15:00:17 +00:00
ipq40xx ipq40xx: add support for Crisis Innovation Lab MeshPoint.One 2019-11-30 00:53:36 +01:00
ipq806x kernel: bump 4.14 to 4.14.158 2019-12-10 09:50:42 +01:00
ixp4xx ixp4xx: remove CONFIG_LEGACY_PTY from kernel config 2019-12-09 20:14:17 +01:00
kirkwood kirkwood: remove CONFIG_LEGACY_PTY from kernel config 2019-12-09 20:14:20 +01:00
lantiq kernel: bump 4.19 to 4.19.88 2019-12-10 09:50:42 +01:00
layerscape kernel: bump 4.14 to 4.14.158 2019-12-10 09:50:42 +01:00
malta malta: remove CONFIG_LEGACY_PTY from kernel config 2019-12-09 20:16:53 +01:00
mediatek kernel: bump 4.19 to 4.19.88 2019-12-10 09:50:42 +01:00
mpc85xx mpc85xx: add support for Enterasys WS-AP3710i 2019-12-13 22:40:19 +01:00
mvebu kernel: bump 4.19 to 4.19.88 2019-12-10 09:50:42 +01:00
mxs treewide: kernel config: remove runtime options 2019-11-24 14:19:43 +01:00
octeon octeon: fix sysupgrade 2019-11-30 20:19:12 +02:00
octeontx octeontx: fix thunderx BGX underflow irq name 2019-10-27 12:13:59 +01:00
omap omap: switch from uEnv.txt to generic distro booting 2019-11-20 10:46:19 +01:00
orion orion: replace backticks by $(...) 2019-09-29 00:46:13 +02:00
oxnas kernel: bump 4.14 to 4.14.158 2019-12-10 09:50:42 +01:00
pistachio pistachio: split up DEVICE_TITLE 2019-10-12 23:37:00 +02:00
ramips ramips: add support for JCG JHR-AC876M 2019-12-13 19:43:47 +01:00
rb532 rb532: split up DEVICE_TITLE 2019-10-19 13:16:57 +02:00
samsung samsung: split up DEVICE_TITLE 2019-09-11 15:17:09 +02:00
sunxi sunxi: add support for FriendlyARM Nano PI NEO Air dev board 2019-12-13 12:20:09 +01:00
tegra x86,tegra,mvebu: image: use common reproducible IMG_PART_SIGNATURE 2019-11-11 16:37:13 +01:00
uml uml: remove CONFIG_LEGACY_PTY from kernel config 2019-12-09 20:14:17 +01:00
x86 kernel: bump 4.19 to 4.19.84 2019-11-19 14:59:03 +01:00
zynq treewide: kernel config: remove runtime options 2019-11-24 14:19:43 +01:00
Makefile