Piotr Dymacz 16afa08d19 ar71xx: add support for COMFAST CF-E380AC v1 and v2 ... COMFAST CF-E380AC v1/v2 is a ceiling mount AP with PoE support, based on Qualcomm/Atheros QCA9558+QCA9880+AR8035. There are two versions of this model, with different RAM and U-Boot mtd partition sizes: - v1: 128 MB of RAM, 128 KB U-Boot image size - v2: 256 MB of RAM, 256 KB U-Boot image size Version number is available only inside vendor GUI, hardware and markings are the same. Short specification: - 720/600/200 MHz (CPU/DDR/AHB) - 1x 10/100/1000 Mbps Ethernet, with PoE support - 128 or 256 MB of RAM (DDR2) - 16 MB of FLASH - 3T3R 2.4 GHz, with external PA (SE2576L), up to 28 dBm - 3T3R 5 GHz, with external PA (SE5003L1), up to 30 dBm - 6x internal antennas - 1x RGB LED, 1x button - UART (T11), LEDs/GPIO (J7) and USB (T12) headers on PCB - external watchdog (Pericon Technology PT7A7514) Flash instruction: Original firmware is based on OpenWrt. Use sysupgrade image directly in vendor GUI. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>		2016-11-21 10:05:40 +01:00
..
board.d	ar71xx: add support for COMFAST CF-E380AC v1 and v2	2016-11-21 10:05:40 +01:00
hotplug.d	ar71xx: add support for COMFAST CF-E380AC v1 and v2	2016-11-21 10:05:40 +01:00
uci-defaults	ar71xx: add support for D-Link DAP-2695 rev. A1	2016-10-27 01:50:42 +03:00
diag.sh	ar71xx: add support for COMFAST CF-E380AC v1 and v2	2016-11-21 10:05:40 +01:00
inittab	image / basefiles: make console password configurable	2016-04-18 21:53:07 +02:00