openwrt/target/linux/bcm27xx/patches-5.15/950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch
Petr Štetiar ca5c695a45 kernel: bump 5.15 to 5.15.62
Deleted following upstreamed patches:

 bcm27xx: 950-0006-drm-vc4-hdmi-Fix-HPD-GPIO-detection.patch
 bcm27xx: 950-0420-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch
 bcm27xx: 950-0425-drm-vc4-A-present-but-empty-dmas-disables-audio.patch
 bcm27xx: 950-0432-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch
 bcm27xx: 950-0433-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch
 bcm27xx: 950-0435-drm-vc4-Correct-pixel-order-for-DSI0.patch
 bcm27xx: 950-0436-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch
 bcm27xx: 950-0437-drm-vc4-Fix-dsi0-interrupt-support.patch
 bcm27xx: 950-0438-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch
 bcm27xx: 950-0443-drm-vc4-Fix-timings-for-interlaced-modes.patch
 bcm27xx: 950-0445-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch
 bcm27xx: 950-0475-drm-vc4-Reset-HDMI-MISC_CONTROL-register.patch
 bcm27xx: 950-0476-drm-vc4-Release-workaround-buffer-and-DMA-in-error-p.patch
 bcm27xx: 950-0477-drm-vc4-Correct-DSI-divider-calculations.patch
 bcm27xx: 950-0664-drm-vc4-dsi-Correct-max-divider-to-255-not-7.patch

 bcm53xx: 072-next-ARM_dts_BCM53015-add-mr26.patch

 mediatek: 920-linux-next-dts-mt7622-bpi-r64-fix-wps-button.patch

Manually rebased following patches:

 bcm27xx: 950-0004-drm-vc4-hdmi-Remove-the-DDC-probing-for-status-detec.patch
 bcm27xx: 950-0700-net-phy-lan87xx-Decrease-phy-polling-rate.patch
 bcm27xx: 950-0711-drm-vc4-Rename-bridge-to-out_bridge.patch
 bcm27xx: 950-0713-drm-vc4-Remove-splitting-the-bridge-chain-from-the-d.patch
 bcm27xx: 950-0715-drm-vc4-Convert-vc4_dsi-to-using-a-bridge-instead-of.patch
 bcm27xx: 950-0787-vc4-drm-vc4_plane-Keep-fractional-source-coords-insi.patch
 bcm27xx: 950-0914-mmc-block-Don-t-do-single-sector-reads-during-recove.patch

Runtime tested on turris-omnia and glinet-b1300.

Tested-by: John Audia <therealgraysky@proton.me> [bcm2711/RPi4B, mt7622/RT3200]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2022-08-23 10:37:04 +02:00

57 lines
1.9 KiB
Diff

From 9e26092eb098dec04ece28c05f859bc4add249c0 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Thu, 30 Sep 2021 17:51:16 +0100
Subject: [PATCH] drm/vc4: Rename bridge to out_bridge
In preparation for converting the encoder to being a bridge,
rename the variable holding the next bridge in the chain to
out_bridge, so that our bridge can be called bridge.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
drivers/gpu/drm/vc4/vc4_dsi.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
--- a/drivers/gpu/drm/vc4/vc4_dsi.c
+++ b/drivers/gpu/drm/vc4/vc4_dsi.c
@@ -553,7 +553,7 @@ struct vc4_dsi {
struct mipi_dsi_host dsi_host;
struct drm_encoder *encoder;
- struct drm_bridge *bridge;
+ struct drm_bridge *out_bridge;
struct list_head bridge_chain;
void __iomem *regs;
@@ -804,7 +804,7 @@ static void vc4_dsi_encoder_disable(stru
if (iter->funcs->disable)
iter->funcs->disable(iter);
- if (iter == dsi->bridge)
+ if (iter == dsi->out_bridge)
break;
}
@@ -1687,9 +1687,9 @@ static int vc4_dsi_bind(struct device *d
return ret;
}
- dsi->bridge = devm_drm_of_get_bridge(dev, dev->of_node, 0, 0);
- if (IS_ERR(dsi->bridge))
- return PTR_ERR(dsi->bridge);
+ dsi->out_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 0, 0);
+ if (IS_ERR(dsi->out_bridge))
+ return PTR_ERR(dsi->out_bridge);
/* The esc clock rate is supposed to always be 100Mhz. */
ret = clk_set_rate(dsi->escape_clock, 100 * 1000000);
@@ -1705,7 +1705,7 @@ static int vc4_dsi_bind(struct device *d
drm_simple_encoder_init(drm, dsi->encoder, DRM_MODE_ENCODER_DSI);
drm_encoder_helper_add(dsi->encoder, &vc4_dsi_encoder_helper_funcs);
- ret = drm_bridge_attach(dsi->encoder, dsi->bridge, NULL, 0);
+ ret = drm_bridge_attach(dsi->encoder, dsi->out_bridge, NULL, 0);
if (ret)
return ret;
/* Disable the atomic helper calls into the bridge. We