openwrt/target/linux/bcm27xx/patches-5.15/950-0606-usb-xhci-add-VLI_TRB_CACHE_BUG-quirk.patch
John Audia 4e9365a654 kernel: bump 5.15 to 5.15.90
All patches automatically rebased.

Build system: x86_64
Build-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: bcm2711/RPi4B, filogic/xiaomi_redmi-router-ax6000-ubootmod

Signed-off-by: John Audia <therealgraysky@proton.me>
2023-01-26 00:16:00 +01:00

74 lines
2.9 KiB
Diff

From a1d5ce866f2e2062246343af757c22e9abe4e844 Mon Sep 17 00:00:00 2001
From: Jonathan Bell <jonathan@raspberrypi.com>
Date: Mon, 13 Dec 2021 16:04:03 +0000
Subject: [PATCH] usb: xhci: add VLI_TRB_CACHE_BUG quirk
The VL805 fetches up to 4 transfer TRBs at a time. TRB reads don't cross
a 64B boundary, and if a TRB is fetched and is not on a 64B boundary,
the read is sized up to the next 64B boundary.
However the VL805 implements a readahead prefetch for TRBs on a transfer
ring. This fetches the next 64B after any TRB read has happened. Near
the end of a ring segment, the prefetcher can read the first 64B of the
next page in physical memory and this is where the behaviour causes a
bug.
The controller does not tag reads with which endpoint they are for, so
if the start of the next page is a ring segment used by a victim
endpoint, and the victim endpoint is about to fetch TRBs from the start
of the segment, the victim endpoint will read from the prefetched data
and not perform a read to main memory. If the data is stale, the ring
cycle state bit may not be correct and the endpoint will silently halt.
Adjust trbs_per_seg for transfer rings allocated for this controller.
See https://github.com/raspberrypi/linux/issues/4685
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
---
drivers/usb/host/xhci-mem.c | 11 +++++++++++
drivers/usb/host/xhci-pci.c | 1 +
drivers/usb/host/xhci.h | 1 +
3 files changed, 13 insertions(+)
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -392,6 +392,17 @@ struct xhci_ring *xhci_ring_alloc(struct
return ring;
ring->trbs_per_seg = TRBS_PER_SEGMENT;
+ /*
+ * The Via VL805 has a bug where cache readahead will fetch off the end
+ * of a page if the Link TRB of a transfer ring is in the last 4 slots.
+ * Where there are consecutive physical pages containing ring segments,
+ * this can cause a desync between the controller's view of a ring
+ * and the host.
+ */
+ if (xhci->quirks & XHCI_VLI_TRB_CACHE_BUG &&
+ type != TYPE_EVENT && type != TYPE_COMMAND)
+ ring->trbs_per_seg -= 4;
+
ret = xhci_alloc_segments_for_ring(xhci, &ring->first_seg,
&ring->last_seg, num_segs, ring->trbs_per_seg,
cycle_state, type, max_packet, flags);
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -297,6 +297,7 @@ static void xhci_pci_quirks(struct devic
xhci->quirks |= XHCI_LPM_SUPPORT;
xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS;
xhci->quirks |= XHCI_AVOID_DQ_ON_LINK;
+ xhci->quirks |= XHCI_VLI_TRB_CACHE_BUG;
}
if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1908,6 +1908,7 @@ struct xhci_hcd {
#define XHCI_SUSPEND_RESUME_CLKS BIT_ULL(43)
#define XHCI_RESET_TO_DEFAULT BIT_ULL(44)
#define XHCI_AVOID_DQ_ON_LINK BIT_ULL(45)
+#define XHCI_VLI_TRB_CACHE_BUG BIT_ULL(46)
unsigned int num_active_eps;
unsigned int limit_active_eps;