mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 13:48:06 +00:00
f32085fc0b
Airoha is a new ARM platform based on Cortex-A53 which has recently been merged into linux-next. Due to BootROM limitations on this platform, the Cortex-A53 can't run in Aarch64 mode and code must be compiled for 32-Bit ARM. This support is based mostly on those linux-next commits backported for kernel 5.15. Patches: 1 - platform support = linux-next 2 - clock driver = linux-next 3 - gpio driver = linux-next 4 - linux,usable-memory-range dts support = linux-next 5 - mtd spinand driver 6 - spi driver 7 - pci driver (kconfig only, uses mediatek PCI) = linux-next Still missing: - Ethernet driver - Sysupgrade support A.t.m there exists one subtarget EN7523 with only one evaluation board. The initramfs can be run with the following commands from u-boot: - u-boot> setenv bootfile \ openwrt-airoha-airoha_en7523-evb-initramfs-kernel.bin u-boot> tftpboot u-boot> bootm 0x81800000 - Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com>
74 lines
1.1 KiB
Plaintext
74 lines
1.1 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
/dts-v1/;
|
|
|
|
/* Bootloader installs ATF here */
|
|
/memreserve/ 0x80000000 0x200000;
|
|
|
|
#include "en7523.dtsi"
|
|
|
|
/ {
|
|
model = "Airoha EN7523 Evaluation Board";
|
|
compatible = "airoha,en7523-evb", "airoha,en7523";
|
|
|
|
aliases {
|
|
serial0 = &uart1;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200 earlycon";
|
|
stdout-path = "serial0:115200n8";
|
|
linux,usable-memory-range = <0x80200000 0x1fe00000>;
|
|
};
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0x80000000 0x20000000>;
|
|
};
|
|
};
|
|
|
|
&gpio0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&nand {
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0 0x7C000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@1 {
|
|
label = "u-boot-env";
|
|
reg = <0x7C000 0x4000>;
|
|
};
|
|
|
|
partition@2 {
|
|
label = "art";
|
|
reg = <0x80000 0x40000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@3 {
|
|
label = "firmware";
|
|
reg = <0xC0000 0xDF40000>;
|
|
};
|
|
};
|
|
};
|