openwrt/target/linux/ath79/dts/qca9561_tplink_archer-c59-v1.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include <dt-bindings/leds/common.h>

#include "qca9561_tplink_archer-c5x.dtsi"

/ {
	compatible = "tplink,archer-c59-v1", "qca,qca9560";
	model = "TP-Link Archer C59 v1";

	aliases {
		label-mac-device = &eth1;
	};
};

&leds {
	usb {
		function = LED_FUNCTION_USB;
		color = <LED_COLOR_ID_GREEN>;
		gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
		linux,default-trigger = "usbport";
		trigger-sources = <&hub_port0>;
	};
};

&usb0 {
	status = "okay";
};

&usb_phy0 {
	status = "okay";
};

&pcie {
	wifi@0,0 {
		compatible = "qcom,ath10k";
		reg = <0x0000 0 0 0 0>;
		nvmem-cells = <&precal_art_5000>, <&macaddr_info_8 (-1)>;
		nvmem-cell-names = "pre-calibration", "mac-address";
	};
};

&spi {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <25000000>;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x000000 0x010000>;
				read-only;
			};

			partition@10000 {
				label = "info";
				reg = <0x010000 0x010000>;
				read-only;

				nvmem-layout {
					compatible = "fixed-layout";
					#address-cells = <1>;
					#size-cells = <1>;

					macaddr_info_8: macaddr@8 {
						compatible = "mac-base";
						reg = <0x8 0x6>;
						#nvmem-cell-cells = <1>;
					};
				};
			};

			partition@20000 {
				compatible = "denx,uimage";
				label = "firmware";
				reg = <0x020000 0xe30000>;
			};

			partition@e50000 {
				label = "tplink";
				reg = <0xe50000 0x1a0000>;
				read-only;
			};

			partition@ff0000 {
				label = "art";
				reg = <0xff0000 0x010000>;
				read-only;

				nvmem-layout {
					compatible = "fixed-layout";
					#address-cells = <1>;
					#size-cells = <1>;

					cal_art_1000: calibration@1000 {
						reg = <0x1000 0x440>;
					};

					precal_art_5000: pre-calibration@5000 {
						reg = <0x5000 0x2f20>;
					};
				};
			};
		};
	};
};

&eth0 {
	nvmem-cells = <&macaddr_info_8 1>;
	nvmem-cell-names = "mac-address";
};

&eth1 {
	nvmem-cells = <&macaddr_info_8 0>;
	nvmem-cell-names = "mac-address";
};

&wmac {
	nvmem-cells = <&macaddr_info_8 0>, <&cal_art_1000>;
	nvmem-cell-names = "mac-address", "calibration";
};