ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-20 06:08:08 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
15d3536c9d
openwrt/target/linux/kirkwood/image/Makefile
Sander van Deijck 4642d8abdc kirkwood: add support for Iomega Storcenter ix4-200d 
Iomega Storcenter ix4-200d is a four-bay SATA NAS powered by a Marvell
Kirkwood SoC clocked at 1.2GHz. It has 512MB of RAM and 32MB of
flash memory, 3x USB 2.0 and 2x 1Gbit/s NIC

Specification:
- SoC: Marvell Kirkwood 88F6281
- CPU/Speed: 1200Mhz
- Flash size: 32 MiB
- RAM: 512MB
- LAN: 2x 1Gbit/s
- 3x USB 2.0

Notes:
- The blue drive LED is triggered by HDD activity, it can not be controlled
  via GPIO.
- The LCD screen requires proprietary code and does not function at this time.
- Due to a kernel-related issue with the Marvell 88SE6121 SATA controller,
  currently only trays numbered #3 and #4 work, #1 and #2 do not. [1]

Serial pinout:

    CN4
    --------------
    | 10 8 6 4 2 |
    |  9 7 5 3 1 |
    -------------- PIN 1 Mark (fat line)

     1 = RXD
     4 = TXD
     6 = GND
     9 = 3.3V (not necessary to connect)

Installation instructions:
1. download initramfs-uImage and copy into tftp server
2. connect the tftp server to network port #1
3. access uboot environment with serial cable and run

    setenv mainlineLinux yes
    setenv arcNumber 1682
    setenv console 'console=ttyS0,115200n8'
    setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)'
    setenv bootargs_root 'root='
    setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000'
    saveenv
    setenv serverip 192.168.1.1
    setenv ipaddr 192.168.1.2
    tftpboot 0x00800000 [initramfs-uImage filename]
    bootm 0x00800000

4. connect to LAN on network port #2, log into openwrt and sysupgrade to install into flash

[1] https://bugzilla.kernel.org/show_bug.cgi?id=216094

Signed-off-by: Sander van Deijck <sander@vandeijck.com>
(aligned FROM from signed-off. LED+key rename, whitespace removal)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2023-05-20 15:35:37 +02:00

342 lines
9.9 KiB
Makefile
Raw Blame History

# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2009-2013 OpenWrt.org
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
KERNEL_LOADADDR:=0x8000
# Some info about Ctera firmware:
# 1. It's simple tar file (GNU standard), but it must have ".firm" suffix.
# 2. It contains two images: kernel and romdisk. Both are required.
# 3. Every image has header and trailer file.
# 4. The struct of tar firmware is: header kernel trailer header romdisk trailer
# 5. In header file are some strings used to describe image. It was decoded from
# factory image.
# 6. Version format in header file is restricted by Original FW.
# 7. Trailer file contains MD5 sum string of header and image file.
# 8. Firmware file must have <=24MB size.
define Build/ctera-firmware
mkdir -p $@.tmp
# Prepare header and trailer file for kernel
echo "# CTera firmware information file" > $@.tmp/header
echo "image_type=kernel" >> $@.tmp/header
echo "arch=Kirkwood" >> $@.tmp/header
echo "board=Any" >> $@.tmp/header
echo "version=3.1.22.30669" >> $@.tmp/header
echo "kernel_cmd=console=ttyS0,115200 earlyprintk" >> $@.tmp/header
echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
>> $@.tmp/header
cp $@ $@.tmp/kernel
echo "MD5=$$(cat $@.tmp/header $@.tmp/kernel | $(MKHASH) md5)" \
> $@.tmp/trailer
tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
-H gnu -C $@.tmp -cf $@.tar header kernel trailer
# Prepare header and trailer file for fake romdisk
echo "# CTera firmware information file" > $@.tmp/header
echo "image_type=romdisk" >> $@.tmp/header
echo "initrd=yes" >> $@.tmp/header
echo "arch=Kirkwood" >> $@.tmp/header
echo "board=Any" >> $@.tmp/header
echo "version=3.1.22.30669" >> $@.tmp/header
echo "date=$$(date $(if $(SOURCE_DATE_EPOCH),-d@$(SOURCE_DATE_EPOCH)))" \
>> $@.tmp/header
rm -f $@
touch $@
$(call Build/append-uImage-fakehdr, ramdisk)
cp $@ $@.tmp/romdisk
echo "MD5=$$(cat $@.tmp/header $@.tmp/romdisk | $(MKHASH) md5)" \
> $@.tmp/trailer
tar $(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
-H gnu -C $@.tmp -rf $@.tar header romdisk trailer
mv $@.tar $@
rm -rf $@.tmp
endef
define Device/kernel-size-migration
DEVICE_COMPAT_VERSION := 2.0
DEVICE_COMPAT_MESSAGE := Partition design has changed compared to \
older versions (up to 21.02) due to kernel size restrictions. \
Upgrade via sysupgrade mechanism is not possible, so new \
installation via factory style image is required.
endef
define Device/Default
PROFILES := Default
DEVICE_DTS = kirkwood-$(lastword $(subst _, ,$(1)))
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
KERNEL := kernel-bin | append-dtb | uImage none
KERNEL_NAME := zImage
KERNEL_SUFFIX := -uImage
KERNEL_IN_UBI := 1
PAGESIZE := 2048
SUBPAGESIZE := 512
BLOCKSIZE := 128k
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
IMAGE/factory.bin := append-ubi
endef
define Device/checkpoint_l-50
DEVICE_VENDOR := Check Point
DEVICE_MODEL := L-50
DEVICE_PACKAGES := kmod-ath9k kmod-gpio-button-hotplug kmod-mvsdio \
kmod-rtc-s35390a kmod-usb-ledtrig-usbport wpad-basic-mbedtls
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += checkpoint_l-50
define Device/cisco_on100
DEVICE_VENDOR := Cisco Systems
DEVICE_MODEL := ON100
KERNEL_SIZE := 5376k
KERNEL_IN_UBI :=
UBINIZE_OPTS := -E 5
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
DEVICE_PACKAGES := kmod-mvsdio
SUPPORTED_DEVICES += on100
endef
TARGET_DEVICES += cisco_on100
define Device/cloudengines_pogoe02
DEVICE_VENDOR := Cloud Engines
DEVICE_MODEL := Pogoplug E02
DEVICE_DTS := kirkwood-pogo_e02
SUPPORTED_DEVICES += pogo_e02
endef
TARGET_DEVICES += cloudengines_pogoe02
define Device/cloudengines_pogoplugv4
DEVICE_VENDOR := Cloud Engines
DEVICE_MODEL := Pogoplug V4
DEVICE_DTS := kirkwood-pogoplug-series-4
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-mvsdio kmod-usb3 \
kmod-gpio-button-hotplug
endef
TARGET_DEVICES += cloudengines_pogoplugv4
define Device/ctera_c200-v1
DEVICE_VENDOR := Ctera
DEVICE_MODEL := C200
DEVICE_VARIANT := V1
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-gpio-button-hotplug \
kmod-hwmon-lm63 kmod-rtc-s35390a kmod-usb-ledtrig-usbport
KERNEL := kernel-bin | append-dtb | uImage none | ctera-firmware
KERNEL_IN_UBI :=
KERNEL_SUFFIX := -factory.firm
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += ctera_c200-v1
define Device/endian_4i-edge-200
DEVICE_VENDOR := Endian
DEVICE_MODEL := 4i Edge 200
DEVICE_ALT0_VENDOR := Endian
DEVICE_ALT0_MODEL := UTM Mini Firewall
DEVICE_PACKAGES := kmod-ath9k kmod-mvsdio wpad-basic-mbedtls
KERNEL_SIZE := 4096k
IMAGES := sysupgrade.bin
endef
TARGET_DEVICES += endian_4i-edge-200
define Device/globalscale_sheevaplug
DEVICE_VENDOR := Globalscale
DEVICE_MODEL := Sheevaplug
DEVICE_PACKAGES := kmod-mvsdio
endef
TARGET_DEVICES += globalscale_sheevaplug
define Device/iom_iconnect-1.1
DEVICE_VENDOR := Iomega
DEVICE_MODEL := Iconnect
DEVICE_DTS := kirkwood-iconnect
SUPPORTED_DEVICES += iconnect
endef
TARGET_DEVICES += iom_iconnect-1.1
define Device/iom_ix2-200
DEVICE_VENDOR := Iomega
DEVICE_MODEL := StorCenter ix2-200
DEVICE_DTS := kirkwood-iomega_ix2_200
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
kmod-gpio-button-hotplug kmod-hwmon-lm63
PAGESIZE := 512
SUBPAGESIZE := 256
BLOCKSIZE := 16k
KERNEL_SIZE := 3072k
KERNEL_IN_UBI :=
UBINIZE_OPTS := -E 5
IMAGE_SIZE := 31744k
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
check-size
endef
TARGET_DEVICES += iom_ix2-200
define Device/iom_ix4-200d
DEVICE_VENDOR := Iomega
DEVICE_MODEL := StorCenter ix4-200d
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
kmod-gpio-button-hotplug kmod-gpio-nxp-74hc164 \
kmod-hwmon-adt7475 kmod-mvsdio kmod-spi-gpio
PAGESIZE := 512
SUBPAGESIZE := 256
BLOCKSIZE := 16k
KERNEL_SIZE := 3072k
KERNEL_IN_UBI :=
UBINIZE_OPTS := -E 5
IMAGE_SIZE := 31744k
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | \
check-size
endef
TARGET_DEVICES += iom_ix4-200d
define Device/iptime_nas1
DEVICE_VENDOR := ipTIME
DEVICE_MODEL := NAS1
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
kmod-gpio-button-hotplug kmod-gpio-pca953x kmod-hwmon-drivetemp \
kmod-hwmon-gpiofan kmod-usb-ledtrig-usbport -uboot-envtools
KERNEL := $$(KERNEL) | iptime-naspkg nas1
BLOCKSIZE := 256k
IMAGE_SIZE := 15872k
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
check-size | append-metadata
endef
TARGET_DEVICES += iptime_nas1
define Device/linksys
DEVICE_VENDOR := Linksys
DEVICE_PACKAGES := kmod-mwl8k wpad-basic-mbedtls kmod-gpio-button-hotplug
KERNEL_IN_UBI :=
UBINIZE_OPTS := -E 5
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi
endef
define Device/linksys_e4200-v2
$(Device/linksys)
$(Device/kernel-size-migration)
DEVICE_MODEL := E4200
DEVICE_VARIANT := v2
KERNEL_SIZE := 3072k
SUPPORTED_DEVICES += linksys,viper linksys-viper
endef
TARGET_DEVICES += linksys_e4200-v2
define Device/linksys_ea3500
$(Device/linksys)
$(Device/kernel-size-migration)
DEVICE_MODEL := EA3500
PAGESIZE := 512
SUBPAGESIZE := 256
BLOCKSIZE := 16k
KERNEL_SIZE := 3072k
SUPPORTED_DEVICES += linksys,audi linksys-audi
endef
TARGET_DEVICES += linksys_ea3500
define Device/linksys_ea4500
$(Device/linksys)
$(Device/kernel-size-migration)
DEVICE_MODEL := EA4500
KERNEL_SIZE := 3072k
SUPPORTED_DEVICES += linksys,viper linksys-viper
endef
TARGET_DEVICES += linksys_ea4500
define Device/netgear_readynas-duo-v2
DEVICE_VENDOR := NETGEAR
DEVICE_MODEL := ReadyNAS Duo
DEVICE_VARIANT := v2
DEVICE_DTS := kirkwood-netgear_readynas_duo_v2
KERNEL_IN_UBI :=
IMAGES := sysupgrade.bin
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
kmod-gpio-button-hotplug kmod-hwmon-g762 kmod-rtc-rs5c372a kmod-usb3
endef
TARGET_DEVICES += netgear_readynas-duo-v2
define Device/raidsonic_ib-nas62x0
DEVICE_VENDOR := RaidSonic
DEVICE_MODEL := ICY BOX IB-NAS62x0
DEVICE_DTS := kirkwood-ib62x0
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4
SUPPORTED_DEVICES += ib62x0
endef
TARGET_DEVICES += raidsonic_ib-nas62x0
define Device/seagate_blackarmor-nas220
DEVICE_VENDOR := Seagate
DEVICE_MODEL := Blackarmor NAS220
DEVICE_PACKAGES := kmod-hwmon-adt7475 kmod-fs-ext4 kmod-ata-marvell-sata \
mdadm kmod-gpio-button-hotplug
PAGESIZE := 512
SUBPAGESIZE := 256
BLOCKSIZE := 16k
UBINIZE_OPTS := -e 1
endef
TARGET_DEVICES += seagate_blackarmor-nas220
define Device/seagate_dockstar
DEVICE_VENDOR := Seagate
DEVICE_MODEL := FreeAgent Dockstar
SUPPORTED_DEVICES += dockstar
endef
TARGET_DEVICES += seagate_dockstar
define Device/seagate_goflexnet
DEVICE_VENDOR := Seagate
DEVICE_MODEL := GoFlexNet
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4
SUPPORTED_DEVICES += goflexnet
endef
TARGET_DEVICES += seagate_goflexnet
define Device/seagate_goflexhome
DEVICE_VENDOR := Seagate
DEVICE_MODEL := GoFlexHome
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4
SUPPORTED_DEVICES += goflexhome
endef
TARGET_DEVICES += seagate_goflexhome
define Device/zyxel_nsa310b
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := NSA310b
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-r8169 kmod-fs-ext4 \
kmod-gpio-button-hotplug kmod-hwmon-lm85
SUPPORTED_DEVICES += nsa310b
endef
TARGET_DEVICES += zyxel_nsa310b
define Device/zyxel_nsa310s
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := NSA310S
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 kmod-gpio-button-hotplug
endef
TARGET_DEVICES += zyxel_nsa310s
define Device/zyxel_nsa325
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := NSA325
DEVICE_VARIANT := v1/v2
DEVICE_PACKAGES := kmod-ata-marvell-sata kmod-fs-ext4 \
kmod-gpio-button-hotplug kmod-rtc-pcf8563 kmod-usb3
SUPPORTED_DEVICES += nsa325
endef
TARGET_DEVICES += zyxel_nsa325
$(eval $(call BuildImage))
Reference in New Issue View Git Blame Copy Permalink