mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 15:02:32 +00:00
15a14cf166
The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance development platform, with a complete debugging environment. The LS1012ARDB board supports the QorIQ LS1012A processor and is optimized to support the high-bandwidth DDR3L memory and a full complement of high-speed SerDes ports. LEDE/OPENWRT will auto strip executable program file while make. So we need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network fiemware be destroyed, then run make to build ls1012ardb firmware. The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message. This issue have noticed the IP owner for investigate, hope he can solve it earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4" bootargs. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
158 lines
5.4 KiB
Diff
158 lines
5.4 KiB
Diff
From 034dd6241b55ab2256eecb845e941fa9b45da38e Mon Sep 17 00:00:00 2001
|
|
From: Yunhui Cui <yunhui.cui@nxp.com>
|
|
Date: Thu, 28 Apr 2016 17:03:57 +0800
|
|
Subject: [PATCH 110/113] mtd: spi-nor: fsl-quad: add flash S25FS extra
|
|
support
|
|
|
|
[context adjustment]
|
|
not apply changes of arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts
|
|
|
|
There are some boards have the same QSPI controller but have
|
|
different vendor flash, So, the controller can use the same
|
|
compatible and share the driver, just for a different flash to do
|
|
the appropriate adaptation. Based on this, we need add the vendor
|
|
field in spi-nor, Because we will use the field to distribute
|
|
corresponding LUT for different flash operations.
|
|
|
|
Signed-off-by: Yunhui Cui <yunhui.cui@nxp.com>
|
|
Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@nxp.com>
|
|
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
|
|
Integrated-by: Jiang Yutang <yutang.jiang@nxp.com>
|
|
---
|
|
drivers/mtd/spi-nor/fsl-quadspi.c | 47 ++++++++++++++++++++++++++++++-------
|
|
drivers/mtd/spi-nor/spi-nor.c | 5 ++--
|
|
include/linux/mtd/spi-nor.h | 1 +
|
|
3 files changed, 42 insertions(+), 11 deletions(-)
|
|
|
|
--- a/drivers/mtd/spi-nor/fsl-quadspi.c
|
|
+++ b/drivers/mtd/spi-nor/fsl-quadspi.c
|
|
@@ -213,6 +213,9 @@
|
|
|
|
#define QUADSPI_MIN_IOMAP SZ_4M
|
|
|
|
+#define FLASH_VENDOR_SPANSION_FS "s25fs"
|
|
+#define SPANSION_S25FS_FAMILY (1 << 1)
|
|
+
|
|
enum fsl_qspi_devtype {
|
|
FSL_QUADSPI_VYBRID,
|
|
FSL_QUADSPI_IMX6SX,
|
|
@@ -329,6 +332,18 @@ static inline int has_added_amba_base_in
|
|
return q->devtype_data->driver_data & QUADSPI_AMBA_BASE_INTERNAL;
|
|
}
|
|
|
|
+static u32 fsl_get_nor_vendor(struct spi_nor *nor)
|
|
+{
|
|
+ u32 vendor_id;
|
|
+
|
|
+ if (nor->vendor) {
|
|
+ if (memcmp(nor->vendor, FLASH_VENDOR_SPANSION_FS,
|
|
+ sizeof(FLASH_VENDOR_SPANSION_FS) - 1))
|
|
+ vendor_id = SPANSION_S25FS_FAMILY;
|
|
+ }
|
|
+ return vendor_id;
|
|
+}
|
|
+
|
|
/*
|
|
* R/W functions for big- or little-endian registers:
|
|
* The qSPI controller's endian is independent of the CPU core's endian.
|
|
@@ -394,13 +409,15 @@ static void fsl_qspi_init_lut(struct fsl
|
|
int rxfifo = q->devtype_data->rxfifo;
|
|
u32 lut_base;
|
|
int i;
|
|
- const struct fsl_qspi_devtype_data *devtype_data = q->devtype_data;
|
|
+ u32 vendor;
|
|
|
|
struct spi_nor *nor = &q->nor[0];
|
|
u8 addrlen = (nor->addr_width == 3) ? ADDR24BIT : ADDR32BIT;
|
|
u8 read_op = nor->read_opcode;
|
|
u8 read_dm = nor->read_dummy;
|
|
|
|
+ vendor = fsl_get_nor_vendor(nor);
|
|
+
|
|
fsl_qspi_unlock_lut(q);
|
|
|
|
/* Clear all the LUT table */
|
|
@@ -418,12 +435,25 @@ static void fsl_qspi_init_lut(struct fsl
|
|
LUT1(FSL_READ, PAD1, rxfifo),
|
|
base + QUADSPI_LUT(lut_base + 1));
|
|
} else if (nor->flash_read == SPI_NOR_QUAD) {
|
|
- qspi_writel(q, LUT0(CMD, PAD1, read_op) |
|
|
- LUT1(ADDR, PAD1, addrlen),
|
|
- base + QUADSPI_LUT(lut_base));
|
|
- qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) |
|
|
- LUT1(FSL_READ, PAD4, rxfifo),
|
|
- base + QUADSPI_LUT(lut_base + 1));
|
|
+ if (q->nor_size == 0x4000000) {
|
|
+ read_op = 0xEC;
|
|
+ qspi_writel(q,
|
|
+ LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD4, addrlen),
|
|
+ base + QUADSPI_LUT(lut_base));
|
|
+ qspi_writel(q,
|
|
+ LUT0(MODE, PAD4, 0xff) | LUT1(DUMMY, PAD4, read_dm),
|
|
+ base + QUADSPI_LUT(lut_base + 1));
|
|
+ qspi_writel(q,
|
|
+ LUT0(FSL_READ, PAD4, rxfifo),
|
|
+ base + QUADSPI_LUT(lut_base + 2));
|
|
+ } else {
|
|
+ qspi_writel(q, LUT0(CMD, PAD1, read_op) |
|
|
+ LUT1(ADDR, PAD1, addrlen),
|
|
+ base + QUADSPI_LUT(lut_base));
|
|
+ qspi_writel(q, LUT0(DUMMY, PAD1, read_dm) |
|
|
+ LUT1(FSL_READ, PAD4, rxfifo),
|
|
+ base + QUADSPI_LUT(lut_base + 1));
|
|
+ }
|
|
} else if (nor->flash_read == SPI_NOR_DDR_QUAD) {
|
|
/* read mode : 1-4-4, such as Spansion s25fl128s. */
|
|
qspi_writel(q, LUT0(CMD, PAD1, read_op)
|
|
@@ -510,7 +540,8 @@ static void fsl_qspi_init_lut(struct fsl
|
|
* use the same value 0x65. But it indicates different meaning.
|
|
*/
|
|
lut_base = SEQID_RDAR_OR_RD_EVCR * 4;
|
|
- if (devtype_data->devtype == FSL_QUADSPI_LS2080A) {
|
|
+
|
|
+ if (vendor == SPANSION_S25FS_FAMILY) {
|
|
/*
|
|
* Read any device register.
|
|
* Used for Spansion S25FS-S family flash only.
|
|
--- a/drivers/mtd/spi-nor/spi-nor.c
|
|
+++ b/drivers/mtd/spi-nor/spi-nor.c
|
|
@@ -796,7 +796,6 @@ static const struct flash_info spi_nor_i
|
|
{ "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
|
|
{ "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
|
|
{ "s25fs256s1", INFO6(0x010219, 0x4d0181, 64 * 1024, 512, 0)},
|
|
- { "s25fs512s", INFO6(0x010220, 0x4d0081, 128 * 1024, 512, 0)},
|
|
{ "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) },
|
|
{ "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
|
|
{ "s25fl512s", INFO(0x010220, 0x4d00, 256 * 1024, 256, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
|
|
@@ -963,11 +962,9 @@ static int spansion_s25fs_disable_4kb_er
|
|
ret = nor->read_reg(nor, SPINOR_OP_SPANSION_RDAR, &cr3v, 1);
|
|
if (ret)
|
|
return ret;
|
|
-/*
|
|
if (!(cr3v & CR3V_4KB_ERASE_UNABLE))
|
|
return -EPERM;
|
|
|
|
-*/
|
|
return 0;
|
|
}
|
|
|
|
@@ -1334,6 +1331,8 @@ int spi_nor_scan(struct spi_nor *nor, co
|
|
|
|
if (!mtd->name)
|
|
mtd->name = dev_name(dev);
|
|
+ if (info->name)
|
|
+ nor->vendor = info->name;
|
|
mtd->priv = nor;
|
|
mtd->type = MTD_NORFLASH;
|
|
mtd->writesize = 1;
|
|
--- a/include/linux/mtd/spi-nor.h
|
|
+++ b/include/linux/mtd/spi-nor.h
|
|
@@ -172,6 +172,7 @@ struct spi_nor {
|
|
bool sst_write_second;
|
|
u32 flags;
|
|
u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE];
|
|
+ char *vendor;
|
|
|
|
int (*prepare)(struct spi_nor *nor, enum spi_nor_ops ops);
|
|
void (*unprepare)(struct spi_nor *nor, enum spi_nor_ops ops);
|