openwrt/target/linux/mediatek/dts/mt7986b-netgear-wax220.dts
Chen Minqiang af740e9ef9 mediatek: fix the name of buswidth to bus-width
Fix the issue of dts buswidth cannot be applied properly with spi driver.
Fix the name of buswidth to bus-width in dts in order to fit the format
in linux spi kernel[1] so that spi-tx-bus-width & spi-rx-bus-width can be
parsed properly.

[1] Documentation/devicetree/bindings/spi/spi-controller.yaml

Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
(cherry picked from commit 36746893ac)
2023-12-12 09:54:51 +01:00

289 lines
5.2 KiB
Plaintext

// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include "mt7986b.dtsi"
/ {
model = "Netgear WAX220";
compatible = "netgear,wax220", "mediatek,mt7986b";
aliases {
serial0 = &uart0;
led-boot = &led_power_blue;
led-failsafe = &led_power_amber;
led-running = &led_power_green;
led-upgrade = &led_power_amber;
};
gpio-keys {
compatible = "gpio-keys";
reset {
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
label = "reset";
};
};
chosen {
stdout-path = "serial0:115200n8";
};
leds {
compatible = "gpio-leds";
wlan5g_green {
gpios = <&pio 12 GPIO_ACTIVE_LOW>;
label = "green:wlan5g";
};
led_power_amber: power_amber {
gpios = <&pio 15 GPIO_ACTIVE_LOW>;
label = "amber:power";
};
wlan2g_green {
gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
label = "green:wlan2g";
};
led_power_blue: power_blue {
gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
label = "blue:power";
};
led_power_green: power_green {
gpios = <&pio 10 GPIO_ACTIVE_LOW>;
label = "green:power";
};
wlan2g_blue {
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
label = "blue:wlan2g";
};
lan_green {
gpios = <&pio 22 GPIO_ACTIVE_HIGH>;
label = "green:lan";
};
lan_amber {
gpios = <&pio 13 GPIO_ACTIVE_LOW>;
label = "amber:lan";
};
wlan5g_blue {
gpios = <&pio 2 GPIO_ACTIVE_LOW>;
label = "blue:wlan5g";
};
};
};
&crypto {
status = "okay";
};
&eth {
status = "okay";
gmac1: mac@1 {
compatible = "mediatek,eth-mac";
reg = <1>;
phy-handle = <&phy6>;
phy-mode = "2500base-x";
};
mdio: mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
};
};
&mdio {
phy6: ethernet-phy@6 {
reg = <6>;
reset-assert-us = <100000>;
reset-deassert-us = <100000>;
reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&pio>;
interrupts = <46 IRQ_TYPE_LEVEL_HIGH>;
};
};
&pio {
spi_flash_pins: spi-flash-pins-33-to-38 {
mux {
function = "spi";
groups = "spi0", "spi0_wp_hold";
};
conf-pu {
pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP";
drive-strength = <8>;
mediatek,pull-up-adv = <0>; /* bias-disable */
};
conf-pd {
pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO";
drive-strength = <8>;
mediatek,pull-down-adv = <0>; /* bias-disable */
};
};
wf_2g_5g_pins: wf_2g_5g-pins {
mux {
function = "wifi";
groups = "wf_2g", "wf_5g";
};
conf {
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
"WF1_TOP_CLK", "WF1_TOP_DATA";
drive-strength = <4>;
};
};
wf_dbdc_pins: wf-dbdc-pins {
mux {
function = "wifi";
groups = "wf_dbdc";
};
conf {
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
"WF0_TOP_CLK", "WF0_TOP_DATA";
drive-strength = <4>;
};
};
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi_flash_pins>;
status = "okay";
spi_nand_flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-nand";
reg = <0>;
spi-max-frequency = <20000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
mediatek,nmbm;
mediatek,bmt-max-ratio = <1>;
mediatek,bmt-max-reserved-blocks = <256>;
mediatek,bmt-remap-range = <0x0 0x580000>;
partitions: partitions {
#address-cells = <0x1>;
#size-cells = <0x1>;
compatible = "fixed-partitions";
partition@0 {
label = "BL2";
read-only;
reg = <0x0 0x100000>;
};
partition@100000 {
label = "u-boot-env";
reg = <0x100000 0x80000>;
};
factory: partition@180000 {
label = "Factory";
reg = <0x180000 0x200000>;
};
partition@380000 {
label = "FIP";
reg = <0x380000 0x200000>;
};
partition@580000 {
label = "ubi";
reg = <0x580000 0x5140000>;
};
partition@56c0000 {
label = "RAE";
reg = <0x56c0000 0x400000>;
};
partition@5ac0000 {
label = "POT";
reg = <0x5ac0000 0x100000>;
};
partition@5bc0000 {
label = "Language";
reg = <0x5bc0000 0x400000>;
};
partition@5fc0000 {
label = "Traffic";
reg = <0x5fc0000 0x200000>;
};
partition@61c0000 {
label = "Cert";
reg = <0x61c0000 0x100000>;
};
partition@62c0000 {
label = "NTGRcryptK";
reg = <0x62c0000 0x100000>;
};
partition@63c0000 {
label = "NTGRcryptD";
reg = <0x63c0000 0x500000>;
};
partition@68c0000 {
label = "LOG";
reg = <0x68c0000 0x100000>;
};
partition@69c0000 {
label = "User_data";
reg = <0x69c0000 0x640000>;
};
};
};
};
&trng {
status = "okay";
};
&uart0 {
status = "okay";
};
&watchdog {
status = "okay";
};
&wifi {
status = "okay";
pinctrl-names = "default", "dbdc";
pinctrl-0 = <&wf_2g_5g_pins>;
pinctrl-1 = <&wf_dbdc_pins>;
mediatek,mtd-eeprom = <&factory 0x0>;
};