Sebastian Schaper ee69f81ca5 ath79: add support for D-Link COVR-C1200 A1 ... The COVR-C1200 devices are sold as "Whole Home Mesh Wi-Fi" sets in packs of two (COVR-C1202) and three (COVR-C1203). Specifications: * QCA9563, 16 MiB flash, 128 MiB RAM, 2x3:2 802.11n * QCA9886 2x2:2 801.11ac Wave 2 * AR8337, 2 Gigabit ports (1: WAN; 2: LAN) * USB Type-C power connector (5V, 3A) Installation COVR Point A: * In factory reset state: OEM Web UI is at 192.168.0.50 no DHCP, skip wizard by directly accessing: http://192.168.0.50/UpdateFirmware_Simple.html * After completing setup wizard: Web UI is at 192.168.0.1 DHCP enabled, login with empty password * Flash factory.bin * Perform a factory reset to restore OpenWrt UCI defaults Installation COVR Points B: * OEM Web UI is at 192.168.0.50, no DHCP, empty password * Flash factory.bin * Perform a factory reset to restore OpenWrt UCI defaults Recovery: * Keep reset button pressed during power on * Recovery Web UI is at 192.168.0.50, no DHCP * Flash factory.bin used to work best with Chromium-based browsers or curl: curl -F firmware=@factory.bin \ http://192.168.0.50/upgrade.cgi since this fails to work on modern Linux systems, there is also a script dlink_recovery_upload.py Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>		2024-03-09 20:00:11 +01:00
..
base-files/etc/hotplug.d/ieee80211
dts	ath79: add support for D-Link COVR-C1200 A1	2024-03-09 20:00:11 +01:00
files
generic	ath79: add support for D-Link COVR-C1200 A1	2024-03-09 20:00:11 +01:00
image	ath79: add support for D-Link COVR-C1200 A1	2024-03-09 20:00:11 +01:00
mikrotik
nand	ath79: Modify GL.iNer GL-S200 lan wan interface	2024-02-02 11:42:42 +01:00
patches-5.15	kernel: bump 5.15 to 5.15.149	2024-03-07 19:30:54 +01:00
patches-6.1	kernel: bump 6.1 to 6.1.80	2024-03-05 00:23:59 +01:00
tiny	ath79: convert ath10k pre-calibration data to NVMEM (binary MAC)	2024-02-01 17:09:02 +01:00
config-5.15
config-6.1
Makefile
modules.mk