mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 23:12:32 +00:00
f5919b65d4
Patch generation process: - rebase rpi/rpi-4.14.y on v4.14.89 from linux-stable - git format-patch v4.14.89 Patches skipped during rebase: - lan78xx: Read MAC address from DT if present - lan78xx: Enable LEDs and auto-negotiation - Revert "softirq: Let ksoftirqd do its job" - sc16is7xx: Fix for multi-channel stall - lan78xx: Ignore DT MAC address if already valid - lan78xx: Simple patch to prevent some crashes - tcp_write_queue_purge clears all the SKBs in the write queue - Revert "lan78xx: Simple patch to prevent some crashes" - lan78xx: Connect phy early - Arm: mm: ftrace: Only set text back to ro after kernel has been marked ro - Revert "Revert "softirq: Let ksoftirqd do its job"" - ASoC: cs4265: SOC_SINGLE register value error fix - Revert "ASoC: cs4265: SOC_SINGLE register value error fix" - Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends" - Revert "Revert "net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"" Patches dropped after rebase: - net: Add non-mainline source for rtl8192cu wlan - net: Fix rtl8192cu build errors on other platforms - brcm: adds support for BCM43341 wifi - brcmfmac: Mute expected startup 'errors' - ARM64: Fix build break for RTL8187/RTL8192CU wifi - ARM64: Enable RTL8187/RTL8192CU wifi in build config - This is the driver for Sony CXD2880 DVB-T2/T tuner + demodulator - brcmfmac: add CLM download support - brcmfmac: request_firmware_direct is quieter - Sets the BCDC priority to constant 0 - brcmfmac: Disable ARP offloading when promiscuous - brcmfmac: Avoid possible out-of-bounds read - brcmfmac: Delete redundant length check - net: rtl8192cu: Normalize indentation - net: rtl8192cu: Fix implicit fallthrough warnings - Revert "Sets the BCDC priority to constant 0" - media: cxd2880: Bump to match 4.18.y version - media: cxd2880-spi: Bump to match 4.18.y version - Revert "mm: alloc_contig: re-allow CMA to compact FS pages" - Revert "Revert "mm: alloc_contig: re-allow CMA to compact FS pages"" - cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with MEDIA_SUBDRV_AUTOSELECT - 950-0421-HID-hid-bigbenff-driver-for-BigBen-Interactive-PS3OF.patch - 950-0453-Add-hid-bigbenff-to-list-of-have_special_driver-for-.patch Make I2C built-in instead of modular as in upstream defconfig; also the easiest way to get MFD_ARIZONA enabled, which is required by kmod-sound-soc-rpi-cirrus. Add missing compatible strings from 4.9/960-add-rasbperrypi-compatible.patch, using upstream names for compute modules. Add extra patch to enable the LEDs on lan78xx. Compile-tested: bcm2708, bcm2709, bcm2710 (with CONFIG_ALL_KMODS=y) Runtime-tested: bcm2708, bcm2710 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
28 lines
956 B
Diff
28 lines
956 B
Diff
From 717b9761b68bf9e63e9041079bfd77a090af4bdd Mon Sep 17 00:00:00 2001
|
|
From: Ben Wolsieffer <benwolsieffer@gmail.com>
|
|
Date: Sun, 9 Dec 2018 16:46:00 -0500
|
|
Subject: [PATCH 451/454] dtoverlays: fe-pi-audio: fix sgtl5000 compatible
|
|
string
|
|
|
|
The compatible string was set to "fepi,sgtl5000", which worked for some
|
|
reason in 4.14, but does not work in 4.19, presumably due to some
|
|
change in the kernel matching logic. The correct string is
|
|
"fsl,sgtl5000".
|
|
|
|
Signed-off-by: Ben Wolsieffer <benwolsieffer@gmail.com>
|
|
---
|
|
arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts | 2 +-
|
|
1 file changed, 1 insertion(+), 1 deletion(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/fe-pi-audio-overlay.dts
|
|
@@ -39,7 +39,7 @@
|
|
|
|
sgtl5000@0a {
|
|
#sound-dai-cells = <0>;
|
|
- compatible = "fepi,sgtl5000";
|
|
+ compatible = "fsl,sgtl5000";
|
|
reg = <0x0a>;
|
|
clocks = <&sgtl5000_mclk>;
|
|
micbias-resistor-k-ohms = <2>;
|