mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
14940aee45
Removed upstreamed: target/linux/mvebu/patches-5.4/001-PCI-aardvark-Wait-for-endpoint-to-be-ready-before-tr.patch target/linux/mvebu/patches-5.4/016-PCI-aardvark-Train-link-immediately-after-enabling-t.patch target/linux/mvebu/patches-5.4/017-PCI-aardvark-Improve-link-training.patch target/linux/mvebu/patches-5.4/018-PCI-aardvark-Issue-PERST-via-GPIO.patch target/linux/mvebu/patches-5.4/020-arm64-dts-marvell-armada-37xx-Set-pcie_reset_pin-to-.patch The following patch does not apply to upstream any more and needs some more work to make it work fully again. I am not sure if we are still able to set the UART to a none standard baud rate. target/linux/ath79/patches-5.4/921-serial-core-add-support-for-boot-console-with-arbitr.patch These patches needed manually changes: target/linux/generic/pending-5.4/110-ehci_hcd_ignore_oc.patch target/linux/ipq806x/patches-5.4/0065-arm-override-compiler-flags.patch target/linux/layerscape/patches-5.4/804-crypto-0016-MLKU-114-1-crypto-caam-reduce-page-0-regs-access-to-.patch target/linux/mvebu/patches-5.4/019-PCI-aardvark-Add-PHY-support.patch target/linux/octeontx/patches-5.4/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch All others updated automatically. Compile-tested on: malta/le, armvirt/64, lantiq/xrx200 Runtime-tested on: malta/le, armvirt/64, lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
62 lines
2.1 KiB
Diff
62 lines
2.1 KiB
Diff
From 510fccc1a7533aa9f46d97ad500fe45ab7f91010 Mon Sep 17 00:00:00 2001
|
|
From: Jonathan Bell <jonathan@raspberrypi.org>
|
|
Date: Mon, 26 Oct 2020 14:03:35 +0000
|
|
Subject: [PATCH] xhci: quirks: add link TRB quirk for VL805
|
|
|
|
The VL805 controller can't cope with the TR Dequeue Pointer for an endpoint
|
|
being set to a Link TRB. The hardware-maintained endpoint context ends up
|
|
stuck at the address of the Link TRB, leading to erroneous ring expansion
|
|
events whenever the enqueue pointer wraps to the dequeue position.
|
|
|
|
If the search for the end of the current TD and ring cycle state lands on
|
|
a Link TRB, move to the next segment.
|
|
|
|
See: https://github.com/raspberrypi/linux/issues/3919
|
|
|
|
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
|
|
---
|
|
drivers/usb/host/xhci-pci.c | 1 +
|
|
drivers/usb/host/xhci-ring.c | 10 ++++++++++
|
|
drivers/usb/host/xhci.h | 1 +
|
|
3 files changed, 12 insertions(+)
|
|
|
|
--- a/drivers/usb/host/xhci-pci.c
|
|
+++ b/drivers/usb/host/xhci-pci.c
|
|
@@ -270,6 +270,7 @@ static void xhci_pci_quirks(struct devic
|
|
pdev->device == 0x3483) {
|
|
xhci->quirks |= XHCI_LPM_SUPPORT;
|
|
xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS;
|
|
+ xhci->quirks |= XHCI_AVOID_DQ_ON_LINK;
|
|
}
|
|
|
|
if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
|
|
--- a/drivers/usb/host/xhci-ring.c
|
|
+++ b/drivers/usb/host/xhci-ring.c
|
|
@@ -653,6 +653,16 @@ void xhci_find_new_dequeue_state(struct
|
|
|
|
} while (!cycle_found || !td_last_trb_found);
|
|
|
|
+ /*
|
|
+ * Quirk: the xHC does not correctly parse link TRBs if the HW Dequeue
|
|
+ * pointer is set to one. Advance to the next TRB (and next segment).
|
|
+ */
|
|
+ if (xhci->quirks & XHCI_AVOID_DQ_ON_LINK && trb_is_link(new_deq)) {
|
|
+ if (link_trb_toggles_cycle(new_deq))
|
|
+ state->new_cycle_state ^= 0x1;
|
|
+ next_trb(xhci, ep_ring, &new_seg, &new_deq);
|
|
+ }
|
|
+
|
|
state->new_deq_seg = new_seg;
|
|
state->new_deq_ptr = new_deq;
|
|
|
|
--- a/drivers/usb/host/xhci.h
|
|
+++ b/drivers/usb/host/xhci.h
|
|
@@ -1880,6 +1880,7 @@ struct xhci_hcd {
|
|
#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(36)
|
|
#define XHCI_SKIP_PHY_INIT BIT_ULL(37)
|
|
#define XHCI_DISABLE_SPARSE BIT_ULL(38)
|
|
+#define XHCI_AVOID_DQ_ON_LINK BIT_ULL(39)
|
|
#define XHCI_NO_SOFT_RETRY BIT_ULL(40)
|
|
|
|
unsigned int num_active_eps;
|