openwrt/package/boot/uboot-envtools/files
Vladyslav Andreichykov 9c55866fad qualcommax: ipq60xx: add Linksys MR7350 support
Linksys MR7350 is a 802.11ax Dual-band router/AP.
Specifications:
* CPU: Qualcomm IPQ6000 Quad core Cortex-A53(A73) 1.5GHz
* RAM: 512MB of DDR3
* Storage: 256Mb NAND
* Ethernet: 5x1G RJ45 ports (QCA8075)
* WLAN:
	* 2.4GHz: Qualcomm QCN5022 2x2 802.11b/g/n/ax 574 Mbps PHY rate
	* 5GHz: Qualcomm QCN5052 2x2@80MHz or  802.11a/b/g/n/ac/ax 1201 Mbps PHY rate
* LED-s:
	* RGB system led
	* USB blue led

* Buttons: 1x Soft reset 1x WPS
* Power: 12V DC Jack

Installation instructions:
Open Linksys Web UI - http://192.168.1.1/ca or http://10.65.1.1/ca depending on your setup.
Login with your admin password. The default password can be found on a sticker under the device.
To enter into the support mode, click on the “CA” link and the bottom of the page.
Open the “Connectivity” menu and upload the squash-factory image with the “Choose file” button.
Click start. Ignore all the prompts and warnings by click “yes” in all the popups.
The Wifi radios are turned off by default. To configure the router, you will need to connect your computer to the LAN port of the device.
Then you would need to write openwrt to the other partition for it to work
- First Check booted partition:
fw_printenv -n boot_part

- Change the partition:
fw_setenv boot_part 1
or
fw_setenv boot_part 2
depending on the current partition

- Then install Openwrt to the other partition if booted in slot 1:
mtd -r -e alt_kernel -n write openwrt-qualcommax-ipq60xx-linksys_mr7350-squashfs-factory.bin alt_kernel

- If in slot 2:
mtd -r -e kernel -n write openwrt-qualcommax-ipq60xx-linksys_mr7350-squashfs-factory.bin kernel

Co-Authored-by: Chukun Pan <amadeus@jmu.edu.cn>
Co-Authored-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Vladyslav Andreichykov <vladdrako007@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/14807
Signed-off-by: Robert Marko <robimarko@gmail.com>
2024-12-07 16:00:58 +01:00
..
apm821xx apm821xx: prepare WNDR4700 for 6.6 - add preliminary u-boot-env access 2024-04-05 09:26:26 +02:00
ath79 ath79: Add support for Sophos AP15C 2024-11-09 03:21:36 +01:00
cns3xxx uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
fw_defaults uboot-envtools: add a board.d script to load defaults from the environment 2024-10-02 15:41:33 +02:00
fw_loadenv uboot-envtools: add fw_loadenv tool 2024-10-02 15:41:33 +02:00
fw_printsys uboot-envtools: add wrapper scripts for alternate config 2021-04-08 09:20:59 +02:00
fw_setsys uboot-envtools: add wrapper scripts for alternate config 2021-04-08 09:20:59 +02:00
imx_cortexa7 uboot-envtools: imx: cortexa7: add TechNexion PICO-PI-IMX7D 2022-07-11 14:28:03 +02:00
imx_cortexa9 uboot-envtools: move imx to imx_cortexa9 2021-11-03 12:45:40 +01:00
ipq40xx ipq40xx: add support for Linksys WHW03 V1 2024-05-05 10:33:13 +02:00
ipq806x ipq806x: add support for Extreme Networks AP3935 2023-10-05 00:56:57 +02:00
kirkwood kirkwood: add D-Link DNS-320L support 2024-06-01 01:29:09 +02:00
lantiq uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
layerscape layerscape: remove Traverse LS1043 boards 2023-07-01 15:47:08 +02:00
mediatek_filogic mediatek: MERCUSYS MR90X v1: add OpenWrt U-Boot (UBI) layout 2024-11-30 18:36:05 +01:00
mediatek_mt7622 uboot-envtools: add u-boot system env config for Xiaomi Redmi AX6S 2024-09-06 23:40:04 +02:00
mediatek_mt7623 uboot-envtools: replace use of platform_get_bootdev 2024-02-26 01:29:22 +00:00
mediatek_mt7629 mediatek: Add support for Linksys EA7500 v3 2024-08-15 00:13:20 +02:00
mpc85xx mpc85xx: add support for Enterasys WS-AP3715i 2023-04-08 14:41:01 +02:00
mvebu uboot-envtools: add settings for Synology DS213j 2023-11-20 13:40:17 +00:00
mxs uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
octeon octeon: n821: add Cisco vEdge 1000 base 2023-07-15 17:05:58 +02:00
oxnas uboot-envtools: oxnas: fix wrong eraseblock size for shuttle,kd20 2022-03-21 20:16:16 +00:00
pistachio uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
qoriq qoriq: add support for WatchGuard Firebox M300 2021-12-21 21:37:46 +02:00
qualcommax_ipq60xx qualcommax: ipq60xx: add Linksys MR7350 support 2024-12-07 16:00:58 +01:00
qualcommax_ipq807x ipq807x: add support for TP-Link EAP660 HD v1 2024-09-08 12:01:19 +02:00
ramips ramips: add support for netis N6 2024-09-19 23:11:58 +02:00
realtek uboot-envtools: add support for APRESIA ApresiaLightGS120GT-SS 2023-02-13 12:22:17 +01:00
rockchip_armv8 uboot-envtools: Add support for Orange Pi R1 Plus & LTS 2024-08-12 21:00:36 +02:00
uboot-envtools.sh uboot-envtools: add support for multiple config partitions 2021-04-08 09:20:59 +02:00