mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 23:12:32 +00:00
793f8ab62c
Add kernel patches for version 6.1. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
87 lines
3.1 KiB
Diff
87 lines
3.1 KiB
Diff
From 16188a175bccc8fc6809b2751ba853defdff9197 Mon Sep 17 00:00:00 2001
|
|
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
Date: Thu, 15 Dec 2022 15:57:18 +0000
|
|
Subject: [PATCH] dtoverlays: Add overlay cm-swap-i2c0 to swap buses on
|
|
i2c0mux
|
|
|
|
The legacy camera stack wiring instructions connect the cameras
|
|
to the opposite sets of GPIOs compared to the arrangement
|
|
more normally used with libcamera on all other platforms.
|
|
|
|
Add an overlay to allow easy swapping of the assignments so
|
|
that the legacy wiring can be used with libcamera.
|
|
|
|
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
---
|
|
arch/arm/boot/dts/overlays/Makefile | 1 +
|
|
arch/arm/boot/dts/overlays/README | 16 +++++++++++
|
|
.../dts/overlays/cm-swap-i2c0-overlay.dts | 27 +++++++++++++++++++
|
|
3 files changed, 44 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/overlays/cm-swap-i2c0-overlay.dts
|
|
|
|
--- a/arch/arm/boot/dts/overlays/Makefile
|
|
+++ b/arch/arm/boot/dts/overlays/Makefile
|
|
@@ -39,6 +39,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
|
|
cap1106.dtbo \
|
|
chipdip-dac.dtbo \
|
|
cirrus-wm5102.dtbo \
|
|
+ cm-swap-i2c0.dtbo \
|
|
cma.dtbo \
|
|
crystalfontz-cfa050_pi_m.dtbo \
|
|
cutiepi-panel.dtbo \
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -787,6 +787,22 @@ Load: dtoverlay=cirrus-wm5102
|
|
Params: <None>
|
|
|
|
|
|
+Name: cm-swap-i2c0
|
|
+Info: Largely for Compute Modules 1&3 where the original instructions for
|
|
+ adding a camera used GPIOs 0&1 for CAM1 and 28&29 for CAM0, whilst all
|
|
+ other platforms use 28&29 (or 44&45) for CAM1.
|
|
+ The default assignment through using this overlay is for
|
|
+ i2c0 to use 28&29, and i2c10 (aka i2c_csi_dsi) to use 28&29, but the
|
|
+ overrides allow this to be changed.
|
|
+Load: dtoverlay=cm-swap-i2c0,<param>=<val>
|
|
+Params: i2c0-gpio0 Use GPIOs 0&1 for i2c0
|
|
+ i2c0-gpio28 Use GPIOs 28&29 for i2c0 (default)
|
|
+ i2c0-gpio44 Use GPIOs 44&45 for i2c0
|
|
+ i2c10-gpio0 Use GPIOs 0&1 for i2c0 (default)
|
|
+ i2c10-gpio28 Use GPIOs 28&29 for i2c0
|
|
+ i2c10-gpio44 Use GPIOs 44&45 for i2c0
|
|
+
|
|
+
|
|
Name: cma
|
|
Info: Set custom CMA sizes, only use if you know what you are doing, might
|
|
clash with other overlays like vc4-fkms-v3d and vc4-kms-v3d.
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/cm-swap-i2c0-overlay.dts
|
|
@@ -0,0 +1,27 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-only
|
|
+// Definitions for IMX708 camera module on VC I2C bus
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+
|
|
+/{
|
|
+ compatible = "brcm,bcm2835";
|
|
+
|
|
+ fragment@0 {
|
|
+ target = <&i2c0mux>;
|
|
+ i2c0mux_frag: __overlay__ {
|
|
+ pinctrl-0 = <&i2c0_gpio28>;
|
|
+ pinctrl-1 = <&i2c0_gpio0>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ __overrides__ {
|
|
+ i2c0-gpio0 = <&i2c0mux_frag>, "pinctrl-0:0=",<&i2c0_gpio0>;
|
|
+ i2c0-gpio28 = <&i2c0mux_frag>, "pinctrl-0:0=",<&i2c0_gpio28>;
|
|
+ i2c0-gpio44 = <&i2c0mux_frag>, "pinctrl-0:0=",<&i2c0_gpio44>;
|
|
+ i2c10-gpio0 = <&i2c0mux_frag>, "pinctrl-1:0=",<&i2c0_gpio0>;
|
|
+ i2c10-gpio28 = <&i2c0mux_frag>, "pinctrl-1:0=",<&i2c0_gpio28>;
|
|
+ i2c10-gpio44 = <&i2c0mux_frag>, "pinctrl-1:0=",<&i2c0_gpio44>;
|
|
+ };
|
|
+};
|