mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 17:48:58 +00:00
7d7aa2fd92
This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Despite, since subtargets range from bcm2708 to bcm2711, it seems appropriate to use bcm27xx instead of bcm2708 (again, as already done for BOARDNAME). This also renames the packages brcm2708-userland and brcm2708-gpu-fw. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Álvaro Fernández Rojas <noltari@gmail.com>
368 lines
7.0 KiB
Diff
368 lines
7.0 KiB
Diff
From 9542646d9211ab4305beb75da97f61cc1968ae6c Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Tue, 28 May 2019 16:36:04 +0100
|
|
Subject: [PATCH] BCM270X_DT: Rename Pi Zero W DT files
|
|
|
|
The downtream Pi Zero W dts file uses the digit 0, whereas upstream
|
|
chose to spell it out - "zero-w". The firmware has, for a long time,
|
|
looked for bcm2708-rpi-zero-w.dtb first before falling back to the
|
|
numerical version. Therefore it is better to follow upstream and
|
|
make the switch to "bcm2708-rpi-zero-w".
|
|
|
|
At the same time, remove some overrides that duplicate values
|
|
inherited from the shared .dtsi files.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/Makefile | 2 +-
|
|
.../boot/dts/{bcm2708-rpi-0-w.dts => bcm2708-rpi-zero-w.dts} | 5 -----
|
|
2 files changed, 1 insertion(+), 6 deletions(-)
|
|
rename arch/arm/boot/dts/{bcm2708-rpi-0-w.dts => bcm2708-rpi-zero-w.dts} (97%)
|
|
|
|
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -4,7 +4,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
|
|
bcm2708-rpi-b.dtb \
|
|
bcm2708-rpi-b-plus.dtb \
|
|
bcm2708-rpi-cm.dtb \
|
|
- bcm2708-rpi-0-w.dtb \
|
|
+ bcm2708-rpi-zero-w.dtb \
|
|
bcm2709-rpi-2-b.dtb \
|
|
bcm2710-rpi-3-b.dtb \
|
|
bcm2710-rpi-3-b-plus.dtb \
|
|
--- a/arch/arm/boot/dts/bcm2708-rpi-0-w.dts
|
|
+++ /dev/null
|
|
@@ -1,167 +0,0 @@
|
|
-/dts-v1/;
|
|
-
|
|
-#include "bcm2708.dtsi"
|
|
-#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
-
|
|
-/ {
|
|
- compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
|
|
- model = "Raspberry Pi Zero W";
|
|
-
|
|
- chosen {
|
|
- bootargs = "coherent_pool=1M 8250.nr_uarts=1";
|
|
- };
|
|
-
|
|
- aliases {
|
|
- serial0 = &uart1;
|
|
- serial1 = &uart0;
|
|
- mmc1 = &mmcnr;
|
|
- };
|
|
-};
|
|
-
|
|
-&gpio {
|
|
- spi0_pins: spi0_pins {
|
|
- brcm,pins = <9 10 11>;
|
|
- brcm,function = <4>; /* alt0 */
|
|
- };
|
|
-
|
|
- spi0_cs_pins: spi0_cs_pins {
|
|
- brcm,pins = <8 7>;
|
|
- brcm,function = <1>; /* output */
|
|
- };
|
|
-
|
|
- i2c0_pins: i2c0 {
|
|
- brcm,pins = <0 1>;
|
|
- brcm,function = <4>;
|
|
- };
|
|
-
|
|
- i2c1_pins: i2c1 {
|
|
- brcm,pins = <2 3>;
|
|
- brcm,function = <4>;
|
|
- };
|
|
-
|
|
- i2s_pins: i2s {
|
|
- brcm,pins = <18 19 20 21>;
|
|
- brcm,function = <4>; /* alt0 */
|
|
- };
|
|
-
|
|
- sdio_pins: sdio_pins {
|
|
- brcm,pins = <34 35 36 37 38 39>;
|
|
- brcm,function = <7>; /* ALT3 = SD1 */
|
|
- brcm,pull = <0 2 2 2 2 2>;
|
|
- };
|
|
-
|
|
- bt_pins: bt_pins {
|
|
- brcm,pins = <43>;
|
|
- brcm,function = <4>; /* alt0:GPCLK2 */
|
|
- brcm,pull = <0>; /* none */
|
|
- };
|
|
-
|
|
- uart0_pins: uart0_pins {
|
|
- brcm,pins = <30 31 32 33>;
|
|
- brcm,function = <7>; /* alt3=UART0 */
|
|
- brcm,pull = <2 0 0 2>; /* up none none up */
|
|
- };
|
|
-
|
|
- uart1_pins: uart1_pins {
|
|
- brcm,pins;
|
|
- brcm,function;
|
|
- brcm,pull;
|
|
- };
|
|
-
|
|
- audio_pins: audio_pins {
|
|
- brcm,pins = <>;
|
|
- brcm,function = <>;
|
|
- };
|
|
-};
|
|
-
|
|
-&mmcnr {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&sdio_pins>;
|
|
- bus-width = <4>;
|
|
- status = "okay";
|
|
-};
|
|
-
|
|
-&uart0 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&uart0_pins &bt_pins>;
|
|
- status = "okay";
|
|
-};
|
|
-
|
|
-&uart1 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&uart1_pins>;
|
|
- status = "okay";
|
|
-};
|
|
-
|
|
-&spi0 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
|
|
- cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
|
|
-
|
|
- spidev0: spidev@0{
|
|
- compatible = "spidev";
|
|
- reg = <0>; /* CE0 */
|
|
- #address-cells = <1>;
|
|
- #size-cells = <0>;
|
|
- spi-max-frequency = <125000000>;
|
|
- };
|
|
-
|
|
- spidev1: spidev@1{
|
|
- compatible = "spidev";
|
|
- reg = <1>; /* CE1 */
|
|
- #address-cells = <1>;
|
|
- #size-cells = <0>;
|
|
- spi-max-frequency = <125000000>;
|
|
- };
|
|
-};
|
|
-
|
|
-&i2c0 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&i2c0_pins>;
|
|
- clock-frequency = <100000>;
|
|
-};
|
|
-
|
|
-&i2c1 {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&i2c1_pins>;
|
|
- clock-frequency = <100000>;
|
|
-};
|
|
-
|
|
-&i2c2 {
|
|
- clock-frequency = <100000>;
|
|
-};
|
|
-
|
|
-&i2s {
|
|
- #sound-dai-cells = <0>;
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&i2s_pins>;
|
|
-};
|
|
-
|
|
-&random {
|
|
- status = "okay";
|
|
-};
|
|
-
|
|
-&leds {
|
|
- act_led: act {
|
|
- label = "led0";
|
|
- linux,default-trigger = "mmc0";
|
|
- gpios = <&gpio 47 0>;
|
|
- };
|
|
-};
|
|
-
|
|
-&hdmi {
|
|
- hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
|
-};
|
|
-
|
|
-&audio {
|
|
- pinctrl-names = "default";
|
|
- pinctrl-0 = <&audio_pins>;
|
|
-};
|
|
-
|
|
-/ {
|
|
- __overrides__ {
|
|
- act_led_gpio = <&act_led>,"gpios:4";
|
|
- act_led_activelow = <&act_led>,"gpios:8";
|
|
- act_led_trigger = <&act_led>,"linux,default-trigger";
|
|
- };
|
|
-};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/bcm2708-rpi-zero-w.dts
|
|
@@ -0,0 +1,162 @@
|
|
+/dts-v1/;
|
|
+
|
|
+#include "bcm2708.dtsi"
|
|
+#include "bcm283x-rpi-csi1-2lane.dtsi"
|
|
+
|
|
+/ {
|
|
+ compatible = "raspberrypi,model-zero-w", "brcm,bcm2835";
|
|
+ model = "Raspberry Pi Zero W";
|
|
+
|
|
+ chosen {
|
|
+ bootargs = "coherent_pool=1M 8250.nr_uarts=1";
|
|
+ };
|
|
+
|
|
+ aliases {
|
|
+ serial0 = &uart1;
|
|
+ serial1 = &uart0;
|
|
+ mmc1 = &mmcnr;
|
|
+ };
|
|
+};
|
|
+
|
|
+&gpio {
|
|
+ spi0_pins: spi0_pins {
|
|
+ brcm,pins = <9 10 11>;
|
|
+ brcm,function = <4>; /* alt0 */
|
|
+ };
|
|
+
|
|
+ spi0_cs_pins: spi0_cs_pins {
|
|
+ brcm,pins = <8 7>;
|
|
+ brcm,function = <1>; /* output */
|
|
+ };
|
|
+
|
|
+ i2c0_pins: i2c0 {
|
|
+ brcm,pins = <0 1>;
|
|
+ brcm,function = <4>;
|
|
+ };
|
|
+
|
|
+ i2c1_pins: i2c1 {
|
|
+ brcm,pins = <2 3>;
|
|
+ brcm,function = <4>;
|
|
+ };
|
|
+
|
|
+ i2s_pins: i2s {
|
|
+ brcm,pins = <18 19 20 21>;
|
|
+ brcm,function = <4>; /* alt0 */
|
|
+ };
|
|
+
|
|
+ sdio_pins: sdio_pins {
|
|
+ brcm,pins = <34 35 36 37 38 39>;
|
|
+ brcm,function = <7>; /* ALT3 = SD1 */
|
|
+ brcm,pull = <0 2 2 2 2 2>;
|
|
+ };
|
|
+
|
|
+ bt_pins: bt_pins {
|
|
+ brcm,pins = <43>;
|
|
+ brcm,function = <4>; /* alt0:GPCLK2 */
|
|
+ brcm,pull = <0>; /* none */
|
|
+ };
|
|
+
|
|
+ uart0_pins: uart0_pins {
|
|
+ brcm,pins = <30 31 32 33>;
|
|
+ brcm,function = <7>; /* alt3=UART0 */
|
|
+ brcm,pull = <2 0 0 2>; /* up none none up */
|
|
+ };
|
|
+
|
|
+ uart1_pins: uart1_pins {
|
|
+ brcm,pins;
|
|
+ brcm,function;
|
|
+ brcm,pull;
|
|
+ };
|
|
+
|
|
+ audio_pins: audio_pins {
|
|
+ brcm,pins = <>;
|
|
+ brcm,function = <>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&mmcnr {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&sdio_pins>;
|
|
+ bus-width = <4>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&uart0_pins &bt_pins>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&uart1 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&uart1_pins>;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&spi0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
|
|
+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
|
|
+
|
|
+ spidev0: spidev@0{
|
|
+ compatible = "spidev";
|
|
+ reg = <0>; /* CE0 */
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ spi-max-frequency = <125000000>;
|
|
+ };
|
|
+
|
|
+ spidev1: spidev@1{
|
|
+ compatible = "spidev";
|
|
+ reg = <1>; /* CE1 */
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ spi-max-frequency = <125000000>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&i2c0 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&i2c0_pins>;
|
|
+ clock-frequency = <100000>;
|
|
+};
|
|
+
|
|
+&i2c1 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&i2c1_pins>;
|
|
+ clock-frequency = <100000>;
|
|
+};
|
|
+
|
|
+&i2c2 {
|
|
+ clock-frequency = <100000>;
|
|
+};
|
|
+
|
|
+&i2s {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&i2s_pins>;
|
|
+};
|
|
+
|
|
+&leds {
|
|
+ act_led: act {
|
|
+ label = "led0";
|
|
+ linux,default-trigger = "mmc0";
|
|
+ gpios = <&gpio 47 0>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&hdmi {
|
|
+ hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
|
+};
|
|
+
|
|
+&audio {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&audio_pins>;
|
|
+};
|
|
+
|
|
+/ {
|
|
+ __overrides__ {
|
|
+ act_led_gpio = <&act_led>,"gpios:4";
|
|
+ act_led_activelow = <&act_led>,"gpios:8";
|
|
+ act_led_trigger = <&act_led>,"linux,default-trigger";
|
|
+ };
|
|
+};
|