mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 18:47:06 +00:00
bb907d8d44
PMD Global Transmit Disable bit should be cleared for normal operation. This should be HW default, however I found that on Asus RT-AX89X that uses AQR113C PHY and firmware 5.4 this bit is set by default. With this bit set the AQR cannot achieve a link with its link-partner and it took me multiple hours of digging through the vendor GPL source to find this out, so lets always clear this bit during .config_init() to avoid a situation like this in the future. aqr107_wait_processor_intensive_op() is moved up because datasheet notes that any changes to this bit are processor intensive. This is a modified version of patch that got merged upstream as AQR113C has a separate config_init() upstream. Link: https://github.com/openwrt/openwrt/pull/15840 Signed-off-by: Robert Marko <robimarko@gmail.com>
118 lines
4.1 KiB
Diff
118 lines
4.1 KiB
Diff
From 5f62951fba63a9f9cfff564209426bdea5fcc371 Mon Sep 17 00:00:00 2001
|
|
From: Alex Marginean <alexandru.marginean@nxp.com>
|
|
Date: Tue, 27 Aug 2019 15:16:56 +0300
|
|
Subject: [PATCH] drivers: net: phy: aquantia: enable AQR112 and AQR412
|
|
|
|
Adds support for AQR112 and AQR412 which is mostly based on existing code
|
|
with the addition of code configuring the protocol on system side.
|
|
This allows changing the system side protocol without having to deploy a
|
|
different firmware on the PHY.
|
|
|
|
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
|
|
---
|
|
drivers/net/phy/aquantia/aquantia_main.c | 88 +++++++++++++++++++++++++++++++++++++++++
|
|
1 file changed, 88 insertions(+)
|
|
|
|
--- a/drivers/net/phy/aquantia/aquantia_main.c
|
|
+++ b/drivers/net/phy/aquantia/aquantia_main.c
|
|
@@ -90,6 +90,29 @@
|
|
#define AQR107_OP_IN_PROG_SLEEP 1000
|
|
#define AQR107_OP_IN_PROG_TIMEOUT 100000
|
|
|
|
+/* registers in MDIO_MMD_VEND1 region */
|
|
+#define AQUANTIA_VND1_GLOBAL_SC 0x000
|
|
+#define AQUANTIA_VND1_GLOBAL_SC_LP BIT(0xb)
|
|
+
|
|
+/* global start rate, the protocol associated with this speed is used by default
|
|
+ * on SI.
|
|
+ */
|
|
+#define AQUANTIA_VND1_GSTART_RATE 0x31a
|
|
+#define AQUANTIA_VND1_GSTART_RATE_OFF 0
|
|
+#define AQUANTIA_VND1_GSTART_RATE_100M 1
|
|
+#define AQUANTIA_VND1_GSTART_RATE_1G 2
|
|
+#define AQUANTIA_VND1_GSTART_RATE_10G 3
|
|
+#define AQUANTIA_VND1_GSTART_RATE_2_5G 4
|
|
+#define AQUANTIA_VND1_GSTART_RATE_5G 5
|
|
+
|
|
+/* SYSCFG registers for 100M, 1G, 2.5G, 5G, 10G */
|
|
+#define AQUANTIA_VND1_GSYSCFG_BASE 0x31b
|
|
+#define AQUANTIA_VND1_GSYSCFG_100M 0
|
|
+#define AQUANTIA_VND1_GSYSCFG_1G 1
|
|
+#define AQUANTIA_VND1_GSYSCFG_2_5G 2
|
|
+#define AQUANTIA_VND1_GSYSCFG_5G 3
|
|
+#define AQUANTIA_VND1_GSYSCFG_10G 4
|
|
+
|
|
static int aqr107_get_sset_count(struct phy_device *phydev)
|
|
{
|
|
return AQR107_SGMII_STAT_SZ;
|
|
@@ -196,6 +219,51 @@ static int aqr_config_aneg(struct phy_de
|
|
return genphy_c45_check_and_restart_aneg(phydev, changed);
|
|
}
|
|
|
|
+static struct {
|
|
+ u16 syscfg;
|
|
+ int cnt;
|
|
+ u16 start_rate;
|
|
+} aquantia_syscfg[PHY_INTERFACE_MODE_MAX] = {
|
|
+ [PHY_INTERFACE_MODE_SGMII] = {0x04b, AQUANTIA_VND1_GSYSCFG_1G,
|
|
+ AQUANTIA_VND1_GSTART_RATE_1G},
|
|
+ [PHY_INTERFACE_MODE_2500BASEX] = {0x144, AQUANTIA_VND1_GSYSCFG_2_5G,
|
|
+ AQUANTIA_VND1_GSTART_RATE_2_5G},
|
|
+ [PHY_INTERFACE_MODE_XGMII] = {0x100, AQUANTIA_VND1_GSYSCFG_10G,
|
|
+ AQUANTIA_VND1_GSTART_RATE_10G},
|
|
+ [PHY_INTERFACE_MODE_USXGMII] = {0x080, AQUANTIA_VND1_GSYSCFG_10G,
|
|
+ AQUANTIA_VND1_GSTART_RATE_10G},
|
|
+};
|
|
+
|
|
+/* Sets up protocol on system side before calling aqr_config_aneg */
|
|
+static int aqr_config_aneg_set_prot(struct phy_device *phydev)
|
|
+{
|
|
+ int if_type = phydev->interface;
|
|
+ int i;
|
|
+
|
|
+ if (!aquantia_syscfg[if_type].cnt)
|
|
+ return 0;
|
|
+
|
|
+ /* set PHY in low power mode so we can configure protocols */
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC,
|
|
+ AQUANTIA_VND1_GLOBAL_SC_LP);
|
|
+ mdelay(10);
|
|
+
|
|
+ /* set the default rate to enable the SI link */
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GSTART_RATE,
|
|
+ aquantia_syscfg[if_type].start_rate);
|
|
+
|
|
+ for (i = 0; i <= aquantia_syscfg[if_type].cnt; i++)
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1,
|
|
+ AQUANTIA_VND1_GSYSCFG_BASE + i,
|
|
+ aquantia_syscfg[if_type].syscfg);
|
|
+
|
|
+ /* wake PHY back up */
|
|
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, 0);
|
|
+ mdelay(10);
|
|
+
|
|
+ return aqr_config_aneg(phydev);
|
|
+}
|
|
+
|
|
static int aqr_config_intr(struct phy_device *phydev)
|
|
{
|
|
bool en = phydev->interrupts == PHY_INTERRUPT_ENABLED;
|
|
@@ -816,7 +884,7 @@ static struct phy_driver aqr_driver[] =
|
|
PHY_ID_MATCH_MODEL(PHY_ID_AQR112),
|
|
.name = "Aquantia AQR112",
|
|
.probe = aqr107_probe,
|
|
- .config_aneg = aqr_config_aneg,
|
|
+ .config_aneg = aqr_config_aneg_set_prot,
|
|
.config_intr = aqr_config_intr,
|
|
.handle_interrupt = aqr_handle_interrupt,
|
|
.get_tunable = aqr107_get_tunable,
|
|
@@ -839,7 +907,7 @@ static struct phy_driver aqr_driver[] =
|
|
PHY_ID_MATCH_MODEL(PHY_ID_AQR412),
|
|
.name = "Aquantia AQR412",
|
|
.probe = aqr107_probe,
|
|
- .config_aneg = aqr_config_aneg,
|
|
+ .config_aneg = aqr_config_aneg_set_prot,
|
|
.config_intr = aqr_config_intr,
|
|
.handle_interrupt = aqr_handle_interrupt,
|
|
.get_tunable = aqr107_get_tunable,
|