mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
e3ddfcc70c
Initial conversion to new LED color/function format and drop label format where possible. The same label is composed at runtime. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
123 lines
2.3 KiB
Plaintext
123 lines
2.3 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
#include <dt-bindings/leds/common.h>
|
|
|
|
#include "qca9556_avm_fritz-repeater.dtsi"
|
|
|
|
/ {
|
|
compatible = "avm,fritzdvbc", "qca,qca9556";
|
|
model = "AVM FRITZ!WLAN Repeater DVB-C";
|
|
|
|
aliases {
|
|
led-boot = &led_power;
|
|
led-failsafe = &led_power;
|
|
led-running = &led_power;
|
|
led-upgrade = &led_power;
|
|
};
|
|
|
|
led_spi {
|
|
compatible = "spi-gpio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
sck-gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
|
mosi-gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
|
num-chipselects = <0>;
|
|
|
|
spi_gpio: led_gpio@0 {
|
|
compatible = "fairchild,74hc595";
|
|
reg = <0>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
registers-number = <2>;
|
|
spi-max-frequency = <10000000>;
|
|
|
|
gpio_latch_bit {
|
|
gpio-hog;
|
|
gpios = <16 GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
line-name = "gpio-latch-bit";
|
|
};
|
|
};
|
|
};
|
|
|
|
/*
|
|
* GPIO pins 100 or greater in the vendor GPL dump are redirected
|
|
* to the shift register.
|
|
* So OEM source pin 100 becomes 0 on the SR and so forth.
|
|
*/
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_power: power {
|
|
function = LED_FUNCTION_POWER;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
gpios = <&spi_gpio 6 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wlan {
|
|
function = LED_FUNCTION_WLAN;
|
|
color = <LED_COLOR_ID_GREEN>;
|
|
gpios = <&spi_gpio 7 GPIO_ACTIVE_LOW>;
|
|
linux,default-trigger = "phy1tpt";
|
|
};
|
|
|
|
tv {
|
|
label = "green:tv";
|
|
gpios = <&spi_gpio 5 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
rssihigh {
|
|
label = "green:rssihigh";
|
|
gpios = <&spi_gpio 1 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
rssimediumhigh {
|
|
label = "green:rssimediumhigh";
|
|
gpios = <&spi_gpio 2 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
rssimedium {
|
|
label = "green:rssimedium";
|
|
gpios = <&spi_gpio 3 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
rssimediumlow {
|
|
label = "green:rssimediumlow";
|
|
gpios = <&spi_gpio 4 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
rssilow {
|
|
label = "green:rssilow";
|
|
gpios = <&spi_gpio 0 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie0 {
|
|
status = "okay";
|
|
|
|
wifi@0,0 {
|
|
compatible = "qcom,ath10k";
|
|
reg = <0x0000 0 0 0 0>;
|
|
nvmem-cells = <&cal_urlader_198a>;
|
|
nvmem-cell-names = "calibration";
|
|
};
|
|
};
|
|
|
|
&gpio {
|
|
reset-pcie-ep {
|
|
gpio-hog;
|
|
gpios = <109 GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
line-name = "PCIE EP reset";
|
|
};
|
|
|
|
reset-pcie-bus {
|
|
gpio-hog;
|
|
gpios = <110 GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
line-name = "PCIE Bus reset";
|
|
};
|
|
};
|