mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-20 06:08:08 +00:00
12eb5b2384
This patch adds support for the Ubiquiti PowerBeam M (XW), e.g. PBE-M5-400, a 802.11n wireless with a feed+dish form factor. This device was previously supported by the ar71xx loco-m-xw firmware. Specifications: - Atheros AR9342 SoC - 64 MB RAM - 8 MB SPI flash - 1x 10/100 Mbps Ethernet port, 24 Vdc PoE-in - Power and LAN green LEDs - 4x RSSI LEDs (red, orange, green, green) - UART (115200 8N1) Flashing via stock GUI: - Downgrade to AirOS v5.5.x (latest available is 5.5.10-u2) first (see https://openwrt.org/toh/ubiquiti/powerbeam installation instructions) - Upload the factory image via AirOS web GUI. Flashing via TFTP: - Use a pointy tool (e.g., unbent paperclip) to keep the reset button pressed. - Power on the device (keep reset button pressed). - Keep pressing until LEDs flash alternatively LED1+LED3 => LED2+LED4 => LED1+LED3, etc. - Release reset button. - The device starts a TFTP server at 192.168.1.20. - Set a static IP on the computer (e.g., 192.168.1.21/24). - Upload via tftp the factory image: $ tftp 192.168.1.20 tftp> bin tftp> trace tftp> put openwrt-ath79-generic-xxxxx-ubnt_powerbeam-m-xw-squashfs-factory.bin WARNING: so far, no non-destructive method has been discovered for opening the enclosure to reach the serial console. Internal photos are available here: https://fcc.io/SWX-NBM5HP Signed-off-by: Russell Senior <russell@personaltelco.net> |
||
---|---|---|
.. | ||
apm821xx | ||
arc770 | ||
archs38 | ||
armvirt | ||
at91 | ||
ath25 | ||
ath79 | ||
bcm27xx | ||
bcm47xx | ||
bcm53xx | ||
bcm63xx | ||
bcm4908 | ||
bmips | ||
gemini | ||
generic | ||
imx6 | ||
ipq40xx | ||
ipq806x | ||
ipq807x | ||
kirkwood | ||
lantiq | ||
layerscape | ||
malta | ||
mediatek | ||
mpc85xx | ||
mvebu | ||
mxs | ||
octeon | ||
octeontx | ||
omap | ||
oxnas | ||
pistachio | ||
ramips | ||
realtek | ||
rockchip | ||
sunxi | ||
tegra | ||
uml | ||
x86 | ||
zynq | ||
Makefile |