INAGAKI Hiroshi 12ab6ef5c3 ramips: add support for I-O DATA WNPR2600G ... I-O DATA WNPR2600G is a 2.4/5 GHz band 11ac router, based on MediaTek MT7621A. Specification: - SoC : MediaTek MT7621A - RAM : DDR3 128 MiB - Flash : SPI-NOR 16 MiB - WLAN : 2.4/5 GHz 4T4R - 2.4 GHz : MediaTek MT7615 - 5 GHz : MediaTek MT7615 - Ethernet : 10/100/1000 Mbps - Switch : MT7530 (SoC) - LED/keys : 4x/3x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J1: Vcc, RX, GND, TX from SoC side - 57600n8 Flash instruction using factory image: 1. Boot WNPR2600G normaly 2. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 3. Select the OpenWrt factory image and click update ("更新") button to perform firmware update 4. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>		2019-09-25 14:44:36 +08:00
..
etc	ramips: add support for I-O DATA WNPR2600G	2019-09-25 14:44:36 +08:00
lib	ramips: replace backticks by $(...)	2019-09-21 22:17:39 +02:00
sbin	ramips: fix mqmaker witi case in fixup-mac-address	2019-07-11 23:27:06 +08:00