openwrt/package/base-files/Makefile
Hans Dedecker 7f1359c14e base-files: fix wan6 interface config generation for pppoe
Setting ipv6 to auto in case of a pppoe interface will trigger the
creation of a dynamic wan_6 interface meaning two IPv6 interfaces
(wan6 and wan_6) will be active on top of the pppoe interface.
This leads to unpredictable behavior in the network; therefore set
ipv6 to 1 which will prevent the dynamic creation of the wan_6
interface.
Further alias the wan6 interface on top of the wan interface for pppoe
as the wan6 interface can only be started when the link local address is
ready. In case of pppoe the link local address is negotiated during the
Internet Protocol Control Protocol when the PPP link is setup meaning
all the IP address info is only available when the wan interface is up.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-09-18 13:22:58 +02:00

180 lines
5.5 KiB
Makefile

#
# Copyright (C) 2007-2016 OpenWrt.org
# Copyright (C) 2010 Vertical Communications
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
include $(INCLUDE_DIR)/version.mk
PKG_NAME:=base-files
PKG_RELEASE:=173.1
PKG_FLAGS:=nonshared
PKG_FILE_DEPENDS:=$(PLATFORM_DIR)/ $(GENERIC_PLATFORM_DIR)/base-files/
PKG_BUILD_DEPENDS:=usign/host
PKG_LICENSE:=GPL-2.0
# Extend depends from version.mk
PKG_CONFIG_DEPENDS += CONFIG_SIGNED_PACKAGES CONFIG_TARGET_INIT_PATH CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE
include $(INCLUDE_DIR)/package.mk
ifneq ($(DUMP),1)
STAMP_CONFIGURED:=$(strip $(STAMP_CONFIGURED))_$(shell echo $(CONFIG_TARGET_INIT_PATH) | mkhash md5)
TARGET:=-$(BOARD)
endif
define Package/base-files
SECTION:=base
CATEGORY:=Base system
DEPENDS:=+netifd +libc +procd +jsonfilter +SIGNED_PACKAGES:usign +SIGNED_PACKAGES:lede-keyring +fstools +fwtool
TITLE:=Base filesystem for Lede
URL:=http://openwrt.org/
VERSION:=$(PKG_RELEASE)-$(REVISION)
endef
define Package/base-files/conffiles
/etc/config/network
/etc/config/system
/etc/hosts
/etc/inittab
/etc/group
/etc/passwd
/etc/shadow
/etc/profile
/etc/protocols
/etc/services
/etc/shells
/etc/sysctl.conf
/etc/rc.local
/etc/sysupgrade.conf
/etc/config/
/etc/dropbear/
/etc/crontabs/
/etc/sysctl.d/local.conf
/etc/sysctl.d/
/etc/iproute2/rt_tables
/etc/iproute2/rt_protos
$(call $(TARGET)/conffiles)
endef
define Package/base-files/description
This package contains a base filesystem and system scripts for OpenWrt.
endef
define ImageConfigOptions
mkdir -p $(1)/lib/preinit
echo 'pi_suppress_stderr="$(CONFIG_TARGET_PREINIT_SUPPRESS_STDERR)"' >$(1)/lib/preinit/00_preinit.conf
echo 'fs_failsafe_wait_timeout=$(if $(CONFIG_TARGET_PREINIT_TIMEOUT),$(CONFIG_TARGET_PREINIT_TIMEOUT),2)' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_init_path="$(TARGET_INIT_PATH)"' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_init_env=$(if $(CONFIG_TARGET_INIT_ENV),$(CONFIG_TARGET_INIT_ENV),"")' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_init_cmd=$(if $(CONFIG_TARGET_INIT_CMD),$(CONFIG_TARGET_INIT_CMD),"/sbin/init")' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_init_suppress_stderr="$(CONFIG_TARGET_INIT_SUPPRESS_STDERR)"' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_ifname=$(if $(CONFIG_TARGET_PREINIT_IFNAME),$(CONFIG_TARGET_PREINIT_IFNAME),"")' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_ip=$(if $(CONFIG_TARGET_PREINIT_IP),$(CONFIG_TARGET_PREINIT_IP),"192.168.1.1")' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_netmask=$(if $(CONFIG_TARGET_PREINIT_NETMASK),$(CONFIG_TARGET_PREINIT_NETMASK),"255.255.255.0")' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_broadcast=$(if $(CONFIG_TARGET_PREINIT_BROADCAST),$(CONFIG_TARGET_PREINIT_BROADCAST),"192.168.1.255")' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_preinit_net_messages="$(CONFIG_TARGET_PREINIT_SHOW_NETMSG)"' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_preinit_no_failsafe_netmsg="$(CONFIG_TARGET_PREINIT_SUPPRESS_FAILSAFE_NETMSG)"' >>$(1)/lib/preinit/00_preinit.conf
echo 'pi_preinit_no_failsafe="$(CONFIG_TARGET_PREINIT_DISABLE_FAILSAFE)"' >>$(1)/lib/preinit/00_preinit.conf
endef
define Build/Prepare
mkdir -p $(PKG_BUILD_DIR)
endef
define Build/Compile/Default
endef
Build/Compile = $(Build/Compile/Default)
ifdef CONFIG_SIGNED_PACKAGES
define Build/Configure
[ -s $(BUILD_KEY) -a -s $(BUILD_KEY).pub ] || \
$(STAGING_DIR_HOST)/bin/usign -G -s $(BUILD_KEY) -p $(BUILD_KEY).pub -c "Local build key"
endef
define Package/base-files/install-key
mkdir -p $(1)/etc/opkg/keys
$(CP) $(BUILD_KEY).pub $(1)/etc/opkg/keys/`$(STAGING_DIR_HOST)/bin/usign -F -p $(BUILD_KEY).pub`
endef
endif
define Package/base-files/install
$(CP) ./files/* $(1)/
$(Package/base-files/install-key)
if [ -d $(GENERIC_PLATFORM_DIR)/base-files/. ]; then \
$(CP) $(GENERIC_PLATFORM_DIR)/base-files/* $(1)/; \
fi
if [ -d $(PLATFORM_DIR)/base-files/. ]; then \
$(CP) $(PLATFORM_DIR)/base-files/* $(1)/; \
fi
$(if $(filter-out $(PLATFORM_DIR),$(PLATFORM_SUBDIR)), \
if [ -d $(PLATFORM_SUBDIR)/base-files/. ]; then \
$(CP) $(PLATFORM_SUBDIR)/base-files/* $(1)/; \
fi; \
)
$(VERSION_SED) \
$(1)/etc/banner \
$(1)/etc/openwrt_version \
$(1)/usr/lib/os-release
$(VERSION_SED_SCRIPT) \
$(1)/etc/openwrt_release \
$(1)/etc/device_info \
$(1)/usr/lib/os-release
$(SED) "s#%PATH%#$(TARGET_INIT_PATH)#g" \
$(1)/sbin/hotplug-call \
$(1)/etc/preinit \
$(1)/etc/profile
mkdir -p $(1)/CONTROL
mkdir -p $(1)/dev
mkdir -p $(1)/etc/crontabs
mkdir -p $(1)/etc/rc.d
mkdir -p $(1)/overlay
mkdir -p $(1)/lib/firmware
$(if $(LIB_SUFFIX),-$(LN) lib $(1)/lib$(LIB_SUFFIX))
mkdir -p $(1)/mnt
mkdir -p $(1)/proc
mkdir -p $(1)/tmp
mkdir -p $(1)/usr/lib
$(if $(LIB_SUFFIX),-$(LN) lib $(1)/usr/lib$(LIB_SUFFIX))
mkdir -p $(1)/usr/bin
mkdir -p $(1)/sys
mkdir -p $(1)/www
mkdir -p $(1)/root
$(LN) /proc/mounts $(1)/etc/mtab
rm -f $(1)/var
$(LN) /tmp $(1)/var
mkdir -p $(1)/etc
$(LN) /tmp/resolv.conf /tmp/TZ /tmp/localtime $(1)/etc/
chmod 0600 $(1)/etc/shadow
chmod 1777 $(1)/tmp
$(call ImageConfigOptions,$(1))
$(call Package/base-files/install-target,$(1))
for conffile in $(1)/etc/config/*; do \
if [ -f "$$$$conffile" ]; then \
grep "$$$${conffile##$(1)}" $(1)/CONTROL/conffiles || \
echo "$$$${conffile##$(1)}" >> $(1)/CONTROL/conffiles; \
fi \
done
endef
ifneq ($(DUMP),1)
-include $(PLATFORM_DIR)/base-files.mk
-include $(PLATFORM_SUBDIR)/base-files.mk
endif
$(eval $(call BuildPackage,base-files))