Adrian Schmutzler 974d6958a7 ath79: Add support for TP-Link Archer C60 v2 ... TP-Link Archer C60 v2 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561 + QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Flash instruction (WebUI): Download *-factory.bin image and upload it via the firmwary upgrade function of the stock firmware WebUI. Flash instruction (TFTP): 1. Set PC to fixed IP address 192.168.0.66 2. Download *-factory.bin image and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery Flash instruction (under U-Boot, using UART): tftp 0x81000000 ...-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize reset Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>		2019-07-18 00:06:55 +02:00
..
board.d	ath79: Add support for TP-Link Archer C60 v2	2019-07-18 00:06:55 +02:00
hotplug.d	ath79: Add support for TP-Link Archer C60 v2	2019-07-18 00:06:55 +02:00
init.d	ath79: add support for Qihoo C301	2019-07-16 09:51:03 +08:00
uci-defaults	ath79: add support for TP-Link RE355 v1 and RE450 v1	2019-07-17 23:14:23 +02:00