mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-19 05:38:00 +00:00
a1a8cd8282
Hardware Specification: SoC: Mediatek MT7621DAT (MIPS1004Kc 880 MHz, dual core) RAM: 128 MB Storage: 128 MB NAND flash Ethernet: 5x 10/100/1000 Mbps LAN1,LAN2,LAN3,LAN4 & WAN Wireless: 2.4GHz: Mediatek MT7603EN up to 300Mbps (802.11b/g/n MIMO 2x2) Wireless: 5GHz: Mediatek MT7615N up to 1733Mbps (802.11n/ac MU-MIMO 4x4) LEDs: Power (white & amber), Internet (white & amber) LEDs: 2.4G (White), 5Ghz (White) Buttons: WPS, Reset USB: Front V3.0 & Rear V2.0 MAC Table Label xx:xx:xx:xx:xx:38 LAN xx:xx:xx:xx:xx:39 2.4Ghz xx:xx:xx:xx:xx:3A 5Ghz xx:xx:xx:xx:xx:3C WAN xx:xx:xx:xx:xx:38 Flash Instructions: D-Link normal OEM firmware update page 1. upload OpenWRT factory.bin like any D-Link upgrade image D-Link Fail Safe GUI: 1. Push and hold reset button (on the bottom of the device) until power led starts flashing (about 10 secs or so) while plugging in the power cable. 2. Give it ~30 seconds, to boot the fail safe GUI 3. Connect your client computer to LAN1 of the device 4. Set your client IP address manually to 192.168.0.2 / 255.255.255.0 5. Call the fail safe page for the device at http://192.168.0.1/ 6. Use the provided fail safe web GUI to upload the factory.bin to the device Signed-off-by: Alan Luck <luckyhome2008@gmail.com> Link: https://github.com/openwrt/openwrt/pull/16269 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> |
||
|---|---|---|
| .. | ||
| base-files | ||
| config-6.6 | ||
| target.mk | ||