mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
8c405cdccc
The patches were generated from the RPi repo with the following command: git format-patch v6.6.34..rpi-6.1.y Some patches needed rebasing and, as usual, the applied and reverted, wireless drivers, Github workflows, READMEs and defconfigs patches were removed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
43 lines
1.3 KiB
Diff
43 lines
1.3 KiB
Diff
From e99d1768b77e77182d5e7ac9c335c7d8cbd88963 Mon Sep 17 00:00:00 2001
|
|
From: Jonathan Bell <jonathan@raspberrypi.com>
|
|
Date: Mon, 20 May 2024 14:45:37 +0100
|
|
Subject: [PATCH 1096/1135] DTS: bcm2712: don't assume L1 sub-state support at
|
|
chip level
|
|
|
|
L1 sub-states require the connection of the CLKREQ# auxiliary signal
|
|
which is a PCB-level decision, and also depends on the vagrancies of
|
|
adapters/interposers/slots that may exist between the chip and the
|
|
endpoint.
|
|
|
|
If this parameter is present, and the RC driver sees an L1 substate
|
|
capability in the endpoint, then the result is a broken link if CLKREQ#
|
|
isn't end-to-end connected - regardless of the state of the L1.x enable
|
|
bits in the RC.
|
|
|
|
Board-specific methods (HAT+ overlay, board DTB) should define this
|
|
property if required.
|
|
|
|
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
|
|
---
|
|
arch/arm/boot/dts/broadcom/bcm2712.dtsi | 2 --
|
|
1 file changed, 2 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/broadcom/bcm2712.dtsi
|
|
+++ b/arch/arm/boot/dts/broadcom/bcm2712.dtsi
|
|
@@ -1063,7 +1063,6 @@
|
|
0x00 0x00000000
|
|
0x10 0x00000000>;
|
|
|
|
- brcm,enable-l1ss;
|
|
status = "disabled";
|
|
};
|
|
|
|
@@ -1124,7 +1123,6 @@
|
|
0x00 0x00000000
|
|
0x10 0x00000000>;
|
|
|
|
- brcm,enable-l1ss;
|
|
status = "disabled";
|
|
};
|
|
|