mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
8c405cdccc
The patches were generated from the RPi repo with the following command: git format-patch v6.6.34..rpi-6.1.y Some patches needed rebasing and, as usual, the applied and reverted, wireless drivers, Github workflows, READMEs and defconfigs patches were removed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
85 lines
2.8 KiB
Diff
85 lines
2.8 KiB
Diff
From 5171a96d17e35b7af7efbf6e9c9667f93fbd828f Mon Sep 17 00:00:00 2001
|
|
From: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
|
|
Date: Wed, 11 Oct 2023 15:14:59 +0100
|
|
Subject: [PATCH 0669/1085] input: touchscreen: edt-ft5x06: Suppress bogus data
|
|
on startup
|
|
|
|
When polled without the use of IRQ, FT5x06 registers may return
|
|
undefined initial data, causing unwanted touches or event spamming.
|
|
A simple way to filter this out is to suppress touches until the
|
|
TD_STATUS register changes for the first time.
|
|
|
|
Increase the delay before first polling to 300ms, to avoid
|
|
transient I2C read flakiness that seems to occur after reset.
|
|
|
|
Signed-off-by: Nick Hollinghurst <nick.hollinghurst@raspberrypi.com>
|
|
---
|
|
drivers/input/touchscreen/edt-ft5x06.c | 25 ++++++++++++++++++++++---
|
|
1 file changed, 22 insertions(+), 3 deletions(-)
|
|
|
|
--- a/drivers/input/touchscreen/edt-ft5x06.c
|
|
+++ b/drivers/input/touchscreen/edt-ft5x06.c
|
|
@@ -80,6 +80,8 @@
|
|
#define M06_REG_CMD(factory) ((factory) ? 0xf3 : 0xfc)
|
|
#define M06_REG_ADDR(factory, addr) ((factory) ? (addr) & 0x7f : (addr) & 0x3f)
|
|
|
|
+#define RESET_DELAY_MS 300 /* reset deassert to I2C */
|
|
+#define FIRST_POLL_DELAY_MS 300 /* in addition to the above */
|
|
#define POLL_INTERVAL_MS 17 /* 17ms = 60fps */
|
|
|
|
enum edt_pmode {
|
|
@@ -145,6 +147,7 @@ struct edt_ft5x06_ts_data {
|
|
|
|
char name[EDT_NAME_LEN];
|
|
char fw_version[EDT_NAME_LEN];
|
|
+ int init_td_status;
|
|
|
|
struct edt_reg_addr reg_addr;
|
|
enum edt_ver version;
|
|
@@ -324,6 +327,21 @@ static irqreturn_t edt_ft5x06_ts_isr(int
|
|
* points.
|
|
*/
|
|
num_points = min(rdbuf[2] & 0xf, tsdata->max_support_points);
|
|
+
|
|
+ /* When polling FT5x06 without IRQ: initial register contents
|
|
+ * could be stale or undefined; discard all readings until
|
|
+ * TD_STATUS changes for the first time (or num_points is 0).
|
|
+ */
|
|
+ if (tsdata->init_td_status) {
|
|
+ if (tsdata->init_td_status < 0)
|
|
+ tsdata->init_td_status = rdbuf[2];
|
|
+
|
|
+ if (num_points && rdbuf[2] == tsdata->init_td_status)
|
|
+ goto out;
|
|
+
|
|
+ tsdata->init_td_status = 0;
|
|
+ }
|
|
+
|
|
if (!error && num_points)
|
|
error = regmap_bulk_read(tsdata->regmap,
|
|
tsdata->tdata_offset,
|
|
@@ -1300,7 +1318,7 @@ static int edt_ft5x06_ts_probe(struct i2
|
|
if (tsdata->reset_gpio) {
|
|
usleep_range(5000, 6000);
|
|
gpiod_set_value_cansleep(tsdata->reset_gpio, 0);
|
|
- msleep(300);
|
|
+ msleep(RESET_DELAY_MS);
|
|
}
|
|
|
|
input = devm_input_allocate_device(&client->dev);
|
|
@@ -1389,11 +1407,12 @@ static int edt_ft5x06_ts_probe(struct i2
|
|
return error;
|
|
}
|
|
} else {
|
|
+ tsdata->init_td_status = -1; /* filter bogus initial data */
|
|
INIT_WORK(&tsdata->work_i2c_poll,
|
|
edt_ft5x06_ts_work_i2c_poll);
|
|
timer_setup(&tsdata->timer, edt_ft5x06_ts_irq_poll_timer, 0);
|
|
- tsdata->timer.expires = jiffies +
|
|
- msecs_to_jiffies(POLL_INTERVAL_MS);
|
|
+ tsdata->timer.expires =
|
|
+ jiffies + msecs_to_jiffies(FIRST_POLL_DELAY_MS);
|
|
add_timer(&tsdata->timer);
|
|
}
|
|
|