mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 06:33:41 +00:00
8c405cdccc
The patches were generated from the RPi repo with the following command: git format-patch v6.6.34..rpi-6.1.y Some patches needed rebasing and, as usual, the applied and reverted, wireless drivers, Github workflows, READMEs and defconfigs patches were removed. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
692 lines
17 KiB
Diff
692 lines
17 KiB
Diff
From a97d0090cb95fdb869b16b82319ae02e04591f25 Mon Sep 17 00:00:00 2001
|
|
From: James Hughes <JamesH65@users.noreply.github.com>
|
|
Date: Tue, 14 Nov 2017 15:13:15 +0000
|
|
Subject: [PATCH 0114/1085] AXI performance monitor driver (#2222)
|
|
|
|
Uses the debugfs I/F to provide access to the AXI
|
|
bus performance monitors.
|
|
|
|
Requires the new mailbox peripheral access for access
|
|
to the VPU performance registers, system bus access
|
|
is done using direct register reads.
|
|
|
|
Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
|
|
|
|
raspberrypi_axi_monitor: suppress warning
|
|
|
|
Suppress the following warning by casting the pointer to and uintptr_t
|
|
before to u32:
|
|
|
|
Signed-off-by: Matteo Croce <mcroce@redhat.com>
|
|
---
|
|
drivers/perf/Kconfig | 8 +
|
|
drivers/perf/Makefile | 1 +
|
|
drivers/perf/raspberrypi_axi_monitor.c | 637 +++++++++++++++++++++++++
|
|
3 files changed, 646 insertions(+)
|
|
create mode 100644 drivers/perf/raspberrypi_axi_monitor.c
|
|
|
|
--- a/drivers/perf/Kconfig
|
|
+++ b/drivers/perf/Kconfig
|
|
@@ -208,6 +208,14 @@ config ALIBABA_UNCORE_DRW_PMU
|
|
Support for Driveway PMU events monitoring on Yitian 710 DDR
|
|
Sub-system.
|
|
|
|
+config RPI_AXIPERF
|
|
+ depends on ARCH_BCM2835
|
|
+ tristate "RaspberryPi AXI Performance monitors"
|
|
+ default n
|
|
+ help
|
|
+ Say y if you want to use Raspberry Pi AXI performance monitors, m if
|
|
+ you want to build it as a module.
|
|
+
|
|
source "drivers/perf/hisilicon/Kconfig"
|
|
|
|
config MARVELL_CN10K_DDR_PMU
|
|
--- a/drivers/perf/Makefile
|
|
+++ b/drivers/perf/Makefile
|
|
@@ -26,3 +26,4 @@ obj-$(CONFIG_ALIBABA_UNCORE_DRW_PMU) +=
|
|
obj-$(CONFIG_ARM_CORESIGHT_PMU_ARCH_SYSTEM_PMU) += arm_cspmu/
|
|
obj-$(CONFIG_MESON_DDR_PMU) += amlogic/
|
|
obj-$(CONFIG_CXL_PMU) += cxl_pmu.o
|
|
+obj-$(CONFIG_RPI_AXIPERF) += raspberrypi_axi_monitor.o
|
|
--- /dev/null
|
|
+++ b/drivers/perf/raspberrypi_axi_monitor.c
|
|
@@ -0,0 +1,637 @@
|
|
+/*
|
|
+ * raspberrypi_axi_monitor.c
|
|
+ *
|
|
+ * Author: james.hughes@raspberrypi.org
|
|
+ *
|
|
+ * Raspberry Pi AXI performance counters.
|
|
+ *
|
|
+ * Copyright (C) 2017 Raspberry Pi Trading Ltd.
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify
|
|
+ * it under the terms of the GNU General Public License version 2 as
|
|
+ * published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/debugfs.h>
|
|
+#include <linux/devcoredump.h>
|
|
+#include <linux/device.h>
|
|
+#include <linux/kthread.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/netdevice.h>
|
|
+#include <linux/mutex.h>
|
|
+#include <linux/of.h>
|
|
+#include <linux/platform_device.h>
|
|
+
|
|
+#include <soc/bcm2835/raspberrypi-firmware.h>
|
|
+
|
|
+#define NUM_MONITORS 2
|
|
+#define NUM_BUS_WATCHERS_PER_MONITOR 3
|
|
+
|
|
+#define SYSTEM_MONITOR 0
|
|
+#define VPU_MONITOR 1
|
|
+
|
|
+#define MAX_BUSES 16
|
|
+#define DEFAULT_SAMPLE_TIME 100
|
|
+
|
|
+#define NUM_BUS_WATCHER_RESULTS 9
|
|
+
|
|
+struct bus_watcher_data {
|
|
+ union {
|
|
+ u32 results[NUM_BUS_WATCHER_RESULTS];
|
|
+ struct {
|
|
+ u32 atrans;
|
|
+ u32 atwait;
|
|
+ u32 amax;
|
|
+ u32 wtrans;
|
|
+ u32 wtwait;
|
|
+ u32 wmax;
|
|
+ u32 rtrans;
|
|
+ u32 rtwait;
|
|
+ u32 rmax;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+
|
|
+struct rpi_axiperf {
|
|
+ struct platform_device *dev;
|
|
+ struct dentry *root_folder;
|
|
+
|
|
+ struct task_struct *monitor_thread;
|
|
+ struct mutex lock;
|
|
+
|
|
+ struct rpi_firmware *firmware;
|
|
+
|
|
+ /* Sample time spent on for each bus */
|
|
+ int sample_time;
|
|
+
|
|
+ /* Now storage for the per monitor settings and the resulting
|
|
+ * performance figures
|
|
+ */
|
|
+ struct {
|
|
+ /* Bit field of buses we want to monitor */
|
|
+ int bus_enabled;
|
|
+ /* Bit field of buses to filter by */
|
|
+ int bus_filter;
|
|
+ /* The current buses being monitored on this monitor */
|
|
+ int current_bus[NUM_BUS_WATCHERS_PER_MONITOR];
|
|
+ /* The last bus monitored on this monitor */
|
|
+ int last_monitored;
|
|
+
|
|
+ /* Set true if this mailbox must use the mailbox interface
|
|
+ * rather than access registers directly.
|
|
+ */
|
|
+ int use_mailbox_interface;
|
|
+
|
|
+ /* Current result values */
|
|
+ struct bus_watcher_data results[MAX_BUSES];
|
|
+
|
|
+ struct dentry *debugfs_entry;
|
|
+ void __iomem *base_address;
|
|
+
|
|
+ } monitor[NUM_MONITORS];
|
|
+
|
|
+};
|
|
+
|
|
+static struct rpi_axiperf *state;
|
|
+
|
|
+/* Two monitors, System and VPU, each with the following register sets.
|
|
+ * Each monitor can only monitor one bus at a time, so we time share them,
|
|
+ * giving each bus 100ms (default, settable via debugfs) of time on its
|
|
+ * associated monitor
|
|
+ * Record results from the three Bus watchers per monitor and push to the sysfs
|
|
+ */
|
|
+
|
|
+/* general registers */
|
|
+const int GEN_CTRL;
|
|
+
|
|
+const int GEN_CTL_ENABLE_BIT = BIT(0);
|
|
+const int GEN_CTL_RESET_BIT = BIT(1);
|
|
+
|
|
+/* Bus watcher registers */
|
|
+const int BW_PITCH = 0x40;
|
|
+
|
|
+const int BW0_CTRL = 0x40;
|
|
+const int BW1_CTRL = 0x80;
|
|
+const int BW2_CTRL = 0xc0;
|
|
+
|
|
+const int BW_ATRANS_OFFSET = 0x04;
|
|
+const int BW_ATWAIT_OFFSET = 0x08;
|
|
+const int BW_AMAX_OFFSET = 0x0c;
|
|
+const int BW_WTRANS_OFFSET = 0x10;
|
|
+const int BW_WTWAIT_OFFSET = 0x14;
|
|
+const int BW_WMAX_OFFSET = 0x18;
|
|
+const int BW_RTRANS_OFFSET = 0x1c;
|
|
+const int BW_RTWAIT_OFFSET = 0x20;
|
|
+const int BW_RMAX_OFFSET = 0x24;
|
|
+
|
|
+const int BW_CTRL_RESET_BIT = BIT(31);
|
|
+const int BW_CTRL_ENABLE_BIT = BIT(30);
|
|
+const int BW_CTRL_ENABLE_ID_FILTER_BIT = BIT(29);
|
|
+const int BW_CTRL_LIMIT_HALT_BIT = BIT(28);
|
|
+
|
|
+const int BW_CTRL_SOURCE_SHIFT = 8;
|
|
+const int BW_CTRL_SOURCE_MASK = GENMASK(12, 8); // 5 bits
|
|
+const int BW_CTRL_BUS_WATCH_SHIFT;
|
|
+const int BW_CTRL_BUS_WATCH_MASK = GENMASK(5, 0); // 6 bits
|
|
+const int BW_CTRL_BUS_FILTER_SHIFT = 8;
|
|
+
|
|
+const static char *bus_filter_strings[] = {
|
|
+ "",
|
|
+ "CORE0_V",
|
|
+ "ICACHE0",
|
|
+ "DCACHE0",
|
|
+ "CORE1_V",
|
|
+ "ICACHE1",
|
|
+ "DCACHE1",
|
|
+ "L2_MAIN",
|
|
+ "HOST_PORT",
|
|
+ "HOST_PORT2",
|
|
+ "HVS",
|
|
+ "ISP",
|
|
+ "VIDEO_DCT",
|
|
+ "VIDEO_SD2AXI",
|
|
+ "CAM0",
|
|
+ "CAM1",
|
|
+ "DMA0",
|
|
+ "DMA1",
|
|
+ "DMA2_VPU",
|
|
+ "JPEG",
|
|
+ "VIDEO_CME",
|
|
+ "TRANSPOSER",
|
|
+ "VIDEO_FME",
|
|
+ "CCP2TX",
|
|
+ "USB",
|
|
+ "V3D0",
|
|
+ "V3D1",
|
|
+ "V3D2",
|
|
+ "AVE",
|
|
+ "DEBUG",
|
|
+ "CPU",
|
|
+ "M30"
|
|
+};
|
|
+
|
|
+const int num_bus_filters = ARRAY_SIZE(bus_filter_strings);
|
|
+
|
|
+const static char *system_bus_string[] = {
|
|
+ "DMA_L2",
|
|
+ "TRANS",
|
|
+ "JPEG",
|
|
+ "SYSTEM_UC",
|
|
+ "DMA_UC",
|
|
+ "SYSTEM_L2",
|
|
+ "CCP2TX",
|
|
+ "MPHI_RX",
|
|
+ "MPHI_TX",
|
|
+ "HVS",
|
|
+ "H264",
|
|
+ "ISP",
|
|
+ "V3D",
|
|
+ "PERIPHERAL",
|
|
+ "CPU_UC",
|
|
+ "CPU_L2"
|
|
+};
|
|
+
|
|
+const int num_system_buses = ARRAY_SIZE(system_bus_string);
|
|
+
|
|
+const static char *vpu_bus_string[] = {
|
|
+ "VPU1_D_L2",
|
|
+ "VPU0_D_L2",
|
|
+ "VPU1_I_L2",
|
|
+ "VPU0_I_L2",
|
|
+ "SYSTEM_L2",
|
|
+ "L2_FLUSH",
|
|
+ "DMA_L2",
|
|
+ "VPU1_D_UC",
|
|
+ "VPU0_D_UC",
|
|
+ "VPU1_I_UC",
|
|
+ "VPU0_I_UC",
|
|
+ "SYSTEM_UC",
|
|
+ "L2_OUT",
|
|
+ "DMA_UC",
|
|
+ "SDRAM",
|
|
+ "L2_IN"
|
|
+};
|
|
+
|
|
+const int num_vpu_buses = ARRAY_SIZE(vpu_bus_string);
|
|
+
|
|
+const static char *monitor_name[] = {
|
|
+ "System",
|
|
+ "VPU"
|
|
+};
|
|
+
|
|
+static inline void write_reg(int monitor, int reg, u32 value)
|
|
+{
|
|
+ writel(value, state->monitor[monitor].base_address + reg);
|
|
+}
|
|
+
|
|
+static inline u32 read_reg(int monitor, u32 reg)
|
|
+{
|
|
+ return readl(state->monitor[monitor].base_address + reg);
|
|
+}
|
|
+
|
|
+static void read_bus_watcher(int monitor, int watcher, u32 *results)
|
|
+{
|
|
+ if (state->monitor[monitor].use_mailbox_interface) {
|
|
+ /* We have 9 results, plus the overheads of start address and
|
|
+ * length So 11 u32 to define
|
|
+ */
|
|
+ u32 tmp[11];
|
|
+ int err;
|
|
+
|
|
+ tmp[0] = (u32)(uintptr_t)(state->monitor[monitor].base_address + watcher
|
|
+ + BW_ATRANS_OFFSET);
|
|
+ tmp[1] = NUM_BUS_WATCHER_RESULTS;
|
|
+
|
|
+ err = rpi_firmware_property(state->firmware,
|
|
+ RPI_FIRMWARE_GET_PERIPH_REG,
|
|
+ tmp, sizeof(tmp));
|
|
+
|
|
+ if (err < 0 || tmp[1] != NUM_BUS_WATCHER_RESULTS)
|
|
+ dev_err_once(&state->dev->dev,
|
|
+ "Failed to read bus watcher");
|
|
+ else
|
|
+ memcpy(results, &tmp[2],
|
|
+ NUM_BUS_WATCHER_RESULTS * sizeof(u32));
|
|
+ } else {
|
|
+ int i;
|
|
+ void __iomem *addr = state->monitor[monitor].base_address
|
|
+ + watcher + BW_ATRANS_OFFSET;
|
|
+ for (i = 0; i < NUM_BUS_WATCHER_RESULTS; i++, addr += 4)
|
|
+ *results++ = readl(addr);
|
|
+ }
|
|
+}
|
|
+
|
|
+static void set_monitor_control(int monitor, u32 set)
|
|
+{
|
|
+ if (state->monitor[monitor].use_mailbox_interface) {
|
|
+ u32 tmp[3] = {(u32)(uintptr_t)(state->monitor[monitor].base_address +
|
|
+ GEN_CTRL), 1, set};
|
|
+ int err = rpi_firmware_property(state->firmware,
|
|
+ RPI_FIRMWARE_SET_PERIPH_REG,
|
|
+ tmp, sizeof(tmp));
|
|
+
|
|
+ if (err < 0 || tmp[1] != 1)
|
|
+ dev_err_once(&state->dev->dev,
|
|
+ "Failed to set monitor control");
|
|
+ } else
|
|
+ write_reg(monitor, GEN_CTRL, set);
|
|
+}
|
|
+
|
|
+static void set_bus_watcher_control(int monitor, int watcher, u32 set)
|
|
+{
|
|
+ if (state->monitor[monitor].use_mailbox_interface) {
|
|
+ u32 tmp[3] = {(u32)(uintptr_t)(state->monitor[monitor].base_address +
|
|
+ watcher), 1, set};
|
|
+ int err = rpi_firmware_property(state->firmware,
|
|
+ RPI_FIRMWARE_SET_PERIPH_REG,
|
|
+ tmp, sizeof(tmp));
|
|
+ if (err < 0 || tmp[1] != 1)
|
|
+ dev_err_once(&state->dev->dev,
|
|
+ "Failed to set bus watcher control");
|
|
+ } else
|
|
+ write_reg(monitor, watcher, set);
|
|
+}
|
|
+
|
|
+static void monitor(struct rpi_axiperf *state)
|
|
+{
|
|
+ int monitor, num_buses[NUM_MONITORS];
|
|
+
|
|
+ mutex_lock(&state->lock);
|
|
+
|
|
+ for (monitor = 0; monitor < NUM_MONITORS; monitor++) {
|
|
+ typeof(state->monitor[0]) *mon = &(state->monitor[monitor]);
|
|
+
|
|
+ /* Anything enabled? */
|
|
+ if (mon->bus_enabled == 0) {
|
|
+ /* No, disable all monitoring for this monitor */
|
|
+ set_monitor_control(monitor, GEN_CTL_RESET_BIT);
|
|
+ } else {
|
|
+ int i;
|
|
+
|
|
+ /* Find out how many busses we want to monitor, and
|
|
+ * spread our 3 actual monitors over them
|
|
+ */
|
|
+ num_buses[monitor] = hweight32(mon->bus_enabled);
|
|
+ num_buses[monitor] = min(num_buses[monitor],
|
|
+ NUM_BUS_WATCHERS_PER_MONITOR);
|
|
+
|
|
+ for (i = 0; i < num_buses[monitor]; i++) {
|
|
+ int bus_control;
|
|
+
|
|
+ do {
|
|
+ mon->last_monitored++;
|
|
+ mon->last_monitored &= 0xf;
|
|
+ } while ((mon->bus_enabled &
|
|
+ (1 << mon->last_monitored)) == 0);
|
|
+
|
|
+ mon->current_bus[i] = mon->last_monitored;
|
|
+
|
|
+ /* Reset the counters */
|
|
+ set_bus_watcher_control(monitor,
|
|
+ BW0_CTRL +
|
|
+ i*BW_PITCH,
|
|
+ BW_CTRL_RESET_BIT);
|
|
+
|
|
+ bus_control = BW_CTRL_ENABLE_BIT |
|
|
+ mon->current_bus[i];
|
|
+
|
|
+ if (mon->bus_filter) {
|
|
+ bus_control |=
|
|
+ BW_CTRL_ENABLE_ID_FILTER_BIT;
|
|
+ bus_control |=
|
|
+ ((mon->bus_filter & 0x1f)
|
|
+ << BW_CTRL_BUS_FILTER_SHIFT);
|
|
+ }
|
|
+
|
|
+ // Start capture
|
|
+ set_bus_watcher_control(monitor,
|
|
+ BW0_CTRL + i*BW_PITCH,
|
|
+ bus_control);
|
|
+ }
|
|
+ }
|
|
+
|
|
+ /* start monitoring */
|
|
+ set_monitor_control(monitor, GEN_CTL_ENABLE_BIT);
|
|
+ }
|
|
+
|
|
+ mutex_unlock(&state->lock);
|
|
+
|
|
+ msleep(state->sample_time);
|
|
+
|
|
+ /* Now read the results */
|
|
+
|
|
+ mutex_lock(&state->lock);
|
|
+ for (monitor = 0; monitor < NUM_MONITORS; monitor++) {
|
|
+ typeof(state->monitor[0]) *mon = &(state->monitor[monitor]);
|
|
+
|
|
+ /* Anything enabled? */
|
|
+ if (mon->bus_enabled == 0) {
|
|
+ /* No, disable all monitoring for this monitor */
|
|
+ set_monitor_control(monitor, 0);
|
|
+ } else {
|
|
+ int i;
|
|
+
|
|
+ for (i = 0; i < num_buses[monitor]; i++) {
|
|
+ int bus = mon->current_bus[i];
|
|
+
|
|
+ read_bus_watcher(monitor,
|
|
+ BW0_CTRL + i*BW_PITCH,
|
|
+ (u32 *)&mon->results[bus].results);
|
|
+ }
|
|
+ }
|
|
+ }
|
|
+ mutex_unlock(&state->lock);
|
|
+}
|
|
+
|
|
+static int monitor_thread(void *data)
|
|
+{
|
|
+ struct rpi_axiperf *state = data;
|
|
+
|
|
+ while (1) {
|
|
+ monitor(state);
|
|
+
|
|
+ if (kthread_should_stop())
|
|
+ return 0;
|
|
+ }
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static ssize_t myreader(struct file *fp, char __user *user_buffer,
|
|
+ size_t count, loff_t *position)
|
|
+{
|
|
+#define INIT_BUFF_SIZE 2048
|
|
+
|
|
+ int i;
|
|
+ int idx = (int)(uintptr_t)(fp->private_data);
|
|
+ int num_buses, cnt;
|
|
+ char *string_buffer;
|
|
+ int buff_size = INIT_BUFF_SIZE;
|
|
+ char *p;
|
|
+ typeof(state->monitor[0]) *mon = &(state->monitor[idx]);
|
|
+
|
|
+ if (idx < 0 || idx > NUM_MONITORS)
|
|
+ idx = 0;
|
|
+
|
|
+ num_buses = idx == SYSTEM_MONITOR ? num_system_buses : num_vpu_buses;
|
|
+
|
|
+ string_buffer = kmalloc(buff_size, GFP_KERNEL);
|
|
+
|
|
+ if (!string_buffer) {
|
|
+ dev_err(&state->dev->dev,
|
|
+ "Failed temporary string allocation\n");
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ p = string_buffer;
|
|
+
|
|
+ mutex_lock(&state->lock);
|
|
+
|
|
+ if (mon->bus_filter) {
|
|
+ int filt = min(mon->bus_filter & 0x1f, num_bus_filters);
|
|
+
|
|
+ cnt = snprintf(p, buff_size,
|
|
+ "\nMonitoring transactions from %s only\n",
|
|
+ bus_filter_strings[filt]);
|
|
+ p += cnt;
|
|
+ buff_size -= cnt;
|
|
+ }
|
|
+
|
|
+ cnt = snprintf(p, buff_size, " Bus | Atrans Atwait AMax Wtrans Wtwait WMax Rtrans Rtwait RMax\n"
|
|
+ "======================================================================================================\n");
|
|
+
|
|
+ if (cnt >= buff_size)
|
|
+ goto done;
|
|
+
|
|
+ p += cnt;
|
|
+ buff_size -= cnt;
|
|
+
|
|
+ for (i = 0; i < num_buses; i++) {
|
|
+ if (mon->bus_enabled & (1 << i)) {
|
|
+#define DIVIDER (1024)
|
|
+ typeof(mon->results[0]) *res = &(mon->results[i]);
|
|
+
|
|
+ cnt = snprintf(p, buff_size,
|
|
+ "%10s | %8uK %8uK %8uK %8uK %8uK %8uK %8uK %8uK %8uK\n",
|
|
+ idx == SYSTEM_MONITOR ?
|
|
+ system_bus_string[i] :
|
|
+ vpu_bus_string[i],
|
|
+ res->atrans/DIVIDER,
|
|
+ res->atwait/DIVIDER,
|
|
+ res->amax/DIVIDER,
|
|
+ res->wtrans/DIVIDER,
|
|
+ res->wtwait/DIVIDER,
|
|
+ res->wmax/DIVIDER,
|
|
+ res->rtrans/DIVIDER,
|
|
+ res->rtwait/DIVIDER,
|
|
+ res->rmax/DIVIDER
|
|
+ );
|
|
+ if (cnt >= buff_size)
|
|
+ goto done;
|
|
+
|
|
+ p += cnt;
|
|
+ buff_size -= cnt;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ mutex_unlock(&state->lock);
|
|
+
|
|
+done:
|
|
+
|
|
+ /* did the last string entry exceeed our buffer size? ie out of string
|
|
+ * buffer space. Null terminate, use what we have.
|
|
+ */
|
|
+ if (cnt >= buff_size) {
|
|
+ buff_size = 0;
|
|
+ string_buffer[INIT_BUFF_SIZE] = 0;
|
|
+ }
|
|
+
|
|
+ cnt = simple_read_from_buffer(user_buffer, count, position,
|
|
+ string_buffer,
|
|
+ INIT_BUFF_SIZE - buff_size);
|
|
+
|
|
+ kfree(string_buffer);
|
|
+
|
|
+ return cnt;
|
|
+}
|
|
+
|
|
+static ssize_t mywriter(struct file *fp, const char __user *user_buffer,
|
|
+ size_t count, loff_t *position)
|
|
+{
|
|
+ int idx = (int)(uintptr_t)(fp->private_data);
|
|
+
|
|
+ if (idx < 0 || idx > NUM_MONITORS)
|
|
+ idx = 0;
|
|
+
|
|
+ /* At the moment, this does nothing, but in the future it could be
|
|
+ * used to reset counters etc
|
|
+ */
|
|
+ return count;
|
|
+}
|
|
+
|
|
+static const struct file_operations fops_debug = {
|
|
+ .read = myreader,
|
|
+ .write = mywriter,
|
|
+ .open = simple_open
|
|
+};
|
|
+
|
|
+static int rpi_axiperf_probe(struct platform_device *pdev)
|
|
+{
|
|
+ int ret = 0, i;
|
|
+ struct device *dev = &pdev->dev;
|
|
+ struct device_node *np = dev->of_node;
|
|
+ struct device_node *fw_node;
|
|
+
|
|
+ state = kzalloc(sizeof(struct rpi_axiperf), GFP_KERNEL);
|
|
+ if (!state)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ /* Get the firmware handle for future rpi-firmware-xxx calls */
|
|
+ fw_node = of_parse_phandle(np, "firmware", 0);
|
|
+ if (!fw_node) {
|
|
+ dev_err(dev, "Missing firmware node\n");
|
|
+ return -ENOENT;
|
|
+ }
|
|
+
|
|
+ state->firmware = rpi_firmware_get(fw_node);
|
|
+ if (!state->firmware)
|
|
+ return -EPROBE_DEFER;
|
|
+
|
|
+ /* Special case for the VPU monitor, we must use the mailbox interface
|
|
+ * as it is not accessible from the ARM address space.
|
|
+ */
|
|
+ state->monitor[VPU_MONITOR].use_mailbox_interface = 1;
|
|
+ state->monitor[SYSTEM_MONITOR].use_mailbox_interface = 0;
|
|
+
|
|
+ for (i = 0; i < NUM_MONITORS; i++) {
|
|
+ if (state->monitor[i].use_mailbox_interface) {
|
|
+ of_property_read_u32_index(np, "reg", i*2,
|
|
+ (u32 *)(&state->monitor[i].base_address));
|
|
+ } else {
|
|
+ struct resource *resource =
|
|
+ platform_get_resource(pdev, IORESOURCE_MEM, i);
|
|
+
|
|
+ state->monitor[i].base_address =
|
|
+ devm_ioremap_resource(&pdev->dev, resource);
|
|
+ }
|
|
+
|
|
+ if (IS_ERR(state->monitor[i].base_address))
|
|
+ return PTR_ERR(state->monitor[i].base_address);
|
|
+
|
|
+ /* Enable all buses by default */
|
|
+ state->monitor[i].bus_enabled = 0xffff;
|
|
+ }
|
|
+
|
|
+ state->dev = pdev;
|
|
+ platform_set_drvdata(pdev, state);
|
|
+
|
|
+ state->sample_time = DEFAULT_SAMPLE_TIME;
|
|
+
|
|
+ /* Set up all the debugfs stuff */
|
|
+ state->root_folder = debugfs_create_dir(KBUILD_MODNAME, NULL);
|
|
+
|
|
+ for (i = 0; i < NUM_MONITORS; i++) {
|
|
+ state->monitor[i].debugfs_entry =
|
|
+ debugfs_create_dir(monitor_name[i], state->root_folder);
|
|
+ if (IS_ERR(state->monitor[i].debugfs_entry))
|
|
+ state->monitor[i].debugfs_entry = NULL;
|
|
+
|
|
+ debugfs_create_file("data", 0444,
|
|
+ state->monitor[i].debugfs_entry,
|
|
+ (void *)(uintptr_t)i, &fops_debug);
|
|
+ debugfs_create_u32("enable", 0644,
|
|
+ state->monitor[i].debugfs_entry,
|
|
+ &state->monitor[i].bus_enabled);
|
|
+ debugfs_create_u32("filter", 0644,
|
|
+ state->monitor[i].debugfs_entry,
|
|
+ &state->monitor[i].bus_filter);
|
|
+ debugfs_create_u32("sample_time", 0644,
|
|
+ state->monitor[i].debugfs_entry,
|
|
+ &state->sample_time);
|
|
+ }
|
|
+
|
|
+ mutex_init(&state->lock);
|
|
+
|
|
+ state->monitor_thread = kthread_run(monitor_thread, state,
|
|
+ "rpi-axiperfmon");
|
|
+
|
|
+ return ret;
|
|
+
|
|
+}
|
|
+
|
|
+static int rpi_axiperf_remove(struct platform_device *dev)
|
|
+{
|
|
+ int ret = 0;
|
|
+
|
|
+ kthread_stop(state->monitor_thread);
|
|
+
|
|
+ debugfs_remove_recursive(state->root_folder);
|
|
+ state->root_folder = NULL;
|
|
+
|
|
+ return ret;
|
|
+}
|
|
+
|
|
+static const struct of_device_id rpi_axiperf_match[] = {
|
|
+ {
|
|
+ .compatible = "brcm,bcm2835-axiperf",
|
|
+ },
|
|
+ {},
|
|
+};
|
|
+MODULE_DEVICE_TABLE(of, rpi_axiperf_match);
|
|
+
|
|
+static struct platform_driver rpi_axiperf_driver = {
|
|
+ .probe = rpi_axiperf_probe,
|
|
+ .remove = rpi_axiperf_remove,
|
|
+ .driver = {
|
|
+ .name = "rpi-bcm2835-axiperf",
|
|
+ .of_match_table = of_match_ptr(rpi_axiperf_match),
|
|
+ },
|
|
+};
|
|
+
|
|
+module_platform_driver(rpi_axiperf_driver);
|
|
+
|
|
+/* Module information */
|
|
+MODULE_AUTHOR("James Hughes <james.hughes@raspberrypi.org>");
|
|
+MODULE_DESCRIPTION("RPI AXI Performance monitor driver");
|
|
+MODULE_LICENSE("GPL");
|
|
+
|