openwrt/target/linux/ath79/dts/qca9550_dell_apl26-0ae.dts

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/leds/common.h>

#include "qca955x.dtsi"

/ {
	model = "Dell SonicPoint ACe (APL26-0AE)";
	compatible = "dell,apl26-0ae", "qca,qca9550", "qca,qca9558";

	aliases {
		label-mac-device = &eth0;
		led-boot = &led_wrench;
		led-failsafe = &led_wrench;
		led-upgrade = &led_wrench;
	};

	keys {
		compatible = "gpio-keys";

		button-reset {
			label = "reset";
			gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_RESTART>;
		};

		/* Accessible only after disassembling the casing */
		button-service {
			label = "service";
			gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
			linux,code = <KEY_POWER>;
		};
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&jtag_disable_pins>;

		led-lan1-amber {
			color = <LED_COLOR_ID_AMBER>;
			function = LED_FUNCTION_LAN;
			function-enumerator = <1>;
			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
		};

		led-lan1-green {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_LAN;
			function-enumerator = <1>;
			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
		};

		led-lan2-amber {
			color = <LED_COLOR_ID_AMBER>;
			function = LED_FUNCTION_LAN;
			function-enumerator = <2>;
			gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
		};

		led-lan2-green {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_LAN;
			function-enumerator = <2>;
			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
		};

		led-wlan2g {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_WLAN_2GHZ;
			linux,default-trigger = "phy1tpt";
			gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
		};

		led-wlan5g {
			color = <LED_COLOR_ID_GREEN>;
			function = LED_FUNCTION_WLAN_5GHZ;
			linux,default-trigger = "phy0tpt";
			gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
		};

		led_wrench: led-wrench {
			color = <LED_COLOR_ID_AMBER>;
			function = LED_FUNCTION_STATUS;
			gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
		};
	};
};

&eth0 {
	status = "okay";

	nvmem-cells = <&macaddr_sysinfo_50 0>;
	nvmem-cell-names = "mac-address";
	phy-handle = <&phy0>;
	pll-data = <0xa6000000 0x00000101 0x00001616>;
};

&eth1 {
	status = "okay";

	nvmem-cells = <&macaddr_sysinfo_50 1>;
	nvmem-cell-names = "mac-address";
	pll-data = <0x03000101 0x00000101 0x00001616>;

	fixed-link {
		speed = <1000>;
		full-duplex;
	};
};

&mdio0 {
	status = "okay";

	phy0: ethernet-phy@0 {
		reg = <0>;

		qca,ar8327-initvals = <
			0x04 0x07680000 /* PORT0 PAD MODE CTRL */
			0x0c 0x00000080 /* PORT6 PAD MODE CTRL */
			0x10 0x40000000 /* POWER_ON_STRAP */
			0x50 0xffb7c405 /* LED0 CTRL */
			0x54 0xffb7c305 /* LED1 CTRL */
			0x58 0xffb7c033 /* LED2 CTRL */
			0x5c 0x03ffff00 /* LED3 CTRL */
			0x7c 0x0000007e /* PORT0_STATUS */
			0x94 0x0000007e /* PORT6_STATUS */
		>;
	};
};

&pcie0 {
	status = "okay";

	wifi@0,0 {
		compatible = "qcom,ath10k";
		reg = <0x0000 0 0 0 0>;

		/* OEM overwrites EEPROM stored adress and so do we */
		nvmem-cells = <&macaddr_sysinfo_50 2>;
		nvmem-cell-names = "mac-address";
	};
};

&spi {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <25000000>;
		broken-flash-reset;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x0000000 0x0080000>;
				read-only;
			};

			partition@80000 {
				label = "u-boot-env";
				reg = <0x0080000 0x0040000>;
			};

			partition@c0000 {
				label = "sysinfo";
				reg = <0x00c0000 0x0040000>;
				read-only;

				nvmem-layout {
					compatible = "fixed-layout";
					#address-cells = <1>;
					#size-cells = <1>;

					macaddr_sysinfo_50: macaddr@50 {
						compatible = "mac-base";
						reg = <0x50 0x6>;
						#nvmem-cell-cells = <1>;
					};
				};
			};

			partition@100000 {
				label = "art";
				reg = <0x0100000 0x0010000>;
				read-only;

				nvmem-layout {
					compatible = "fixed-layout";
					#address-cells = <1>;
					#size-cells = <1>;

					cal_art_1000: calibration@1000 {
						reg = <0x1000 0x440>;
					};
				};
			};

			partition@110000 {
				label = "firmware";
				reg = <0x0110000 0x1ef0000>;
				compatible = "denx,uimage";
			};
		};
	};
};

&usb_phy0 {
	status = "okay";
};

&usb0 {
	status = "okay";
};

&wmac {
	status = "okay";

	nvmem-cells = <&macaddr_sysinfo_50 10>, <&cal_art_1000>;
	nvmem-cell-names = "mac-address", "calibration";
};