mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-04 13:04:22 +00:00
a3010a7f8d
TP-Link RE200 v1 is a wireless range extender with Ethernet and 2.4G and 5G WiFi with internal antennas. It's based on MediaTek MT7620A+MT7610EN. Specifications -------------- - MediaTek MT7620A (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 1T1R 5 GHz - 1x 10/100 Mbps Ethernet - UART header on PCB (57600 8n1) - 8x LED (GPIO-controlled; only 6 supported), 2x button There are 2.4G and 5G LEDs in red and green which are controlled separately. The 5G LED is currently not supported, since the GPIOs couldn't be determined. Installation ------------ Web Interface ------------- It is possible to upgrade to OpenWrt via the web interface. However, the OEM firmware upgrade file is required and a tool to fix the MD5 sum of the header. This procedure overwrites U-Boot and there is not failsafe / recovery mode present! To prepare an image, you need to take the header and U-Boot (i.e. 0x200 + 0x20000 bytes) from an OEM firmware file and attach the factory image to it. Then fix the header MD5Sum1. Serial console -------------- Opening the case is quite hard, since it is welded together. Rename the OpenWrt factory image to "test.bin", then plug in the device and quickly press "2" to enter flash mode (no line feed). Follow the prompts until OpenWrt is installed. Unfortunately, this devices does not offer a recovery mode or a tftp installation method. If the web interface upgrade fails, you have to open your device and attach serial console. Since the web upgrade overwrites the boot loader, you might also brick your device. Additional notes ---------------- MAC address assignment is based on stock-firmware. For me, the device assigns the MAC on the label to Ethernet and the 2.4G WiFi, while the 5G WiFi has a separate MAC with +2. *:88 Ethernet/2.4G label, uboot 0x1fc00, userconfig 0x0158 *:89 unused userconfig 0x0160 *:8A 5G not present in flash This seems to be the first ramips device with a TP-Link v1 header. The original firmware has the string "EU" embedded, there might be some region- checking going on during the firmware upgrade process. The original firmware also contains U-Boot and thus overwrites the boot loader during upgrade. In order to flash back to stock, the first header and U-Boot need to be stripped from the original firmware. Signed-off-by: Andreas Böhler <dev@aboehler.at>
1180 lines
31 KiB
Makefile
1180 lines
31 KiB
Makefile
#
|
|
# MT7620A Profiles
|
|
#
|
|
|
|
DEVICE_VARS += TPLINK_FLASHLAYOUT TPLINK_HWID TPLINK_HWREV TPLINK_HWREVADD TPLINK_HVERSION \
|
|
DLINK_ROM_ID DLINK_FAMILY_MEMBER DLINK_FIRMWARE_SIZE DLINK_IMAGE_OFFSET
|
|
|
|
define Build/elecom-header
|
|
cp $@ $(KDIR)/v_0.0.0.bin
|
|
( \
|
|
mkhash md5 $(KDIR)/v_0.0.0.bin && \
|
|
echo 458 \
|
|
) | mkhash md5 > $(KDIR)/v_0.0.0.md5
|
|
$(STAGING_DIR_HOST)/bin/tar -c \
|
|
$(if $(SOURCE_DATE_EPOCH),--mtime=@$(SOURCE_DATE_EPOCH)) \
|
|
--owner=0 --group=0 -f $@ -C $(KDIR) v_0.0.0.bin v_0.0.0.md5
|
|
endef
|
|
|
|
# combine kernel and rootfs into one image
|
|
# mktplinkfw <type> <optional extra arguments to mktplinkfw binary>
|
|
# <type> is "sysupgrade" or "factory"
|
|
#
|
|
# -a align the rootfs start on an <align> bytes boundary
|
|
# -j add jffs2 end-of-filesystem markers
|
|
# -s strip padding from end of the image
|
|
# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x)
|
|
define Build/mktplinkfw
|
|
-$(STAGING_DIR_HOST)/bin/mktplinkfw \
|
|
-H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) \
|
|
-N OpenWrt -V $(REVISION) -m $(TPLINK_HEADER_VERSION) \
|
|
-k $(IMAGE_KERNEL) -r $(IMAGE_ROOTFS) -o $@.new -j -X 0x40000 -a 0x4 \
|
|
$(wordlist 2,$(words $(1)),$(1)) \
|
|
$(if $(findstring sysupgrade,$(word 1,$(1))),-s) && mv $@.new $@ || rm -f $@
|
|
endef
|
|
|
|
define Device/aigale_ai-br100
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 7936k
|
|
DEVICE_VENDOR := Aigale
|
|
DEVICE_MODEL := Ai-BR100
|
|
DEVICE_PACKAGES:= kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += ai-br100
|
|
endef
|
|
TARGET_DEVICES += aigale_ai-br100
|
|
|
|
define Device/alfa-network_ac1200rm
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := ALFA Network
|
|
DEVICE_MODEL := AC1200RM
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci uboot-envtools
|
|
endef
|
|
TARGET_DEVICES += alfa-network_ac1200rm
|
|
|
|
define Device/alfa-network_r36m-e4g
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := ALFA Network
|
|
DEVICE_MODEL := R36M-E4G
|
|
DEVICE_PACKAGES := kmod-i2c-ralink kmod-usb2 kmod-usb-ohci uboot-envtools \
|
|
uqmi
|
|
endef
|
|
TARGET_DEVICES += alfa-network_r36m-e4g
|
|
|
|
define Device/alfa-network_tube-e4g
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := ALFA Network
|
|
DEVICE_MODEL := Tube-E4G
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci uboot-envtools uqmi -iwinfo \
|
|
-kmod-rt2800-soc -wpad-basic
|
|
endef
|
|
TARGET_DEVICES += alfa-network_tube-e4g
|
|
|
|
define Device/amit_jboot
|
|
DLINK_IMAGE_OFFSET := 0x10000
|
|
KERNEL := $(KERNEL_DTB)
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := mkdlinkfw | pad-rootfs | append-metadata
|
|
IMAGE/factory.bin := mkdlinkfw | pad-rootfs | mkdlinkfw-factory
|
|
DEVICE_PACKAGES := jboot-tools kmod-usb2 kmod-usb-ohci
|
|
endef
|
|
|
|
define Device/Archer
|
|
SOC := mt7620a
|
|
DEVICE_VENDOR := TP-Link
|
|
TPLINK_HWREVADD := 0
|
|
TPLINK_HVERSION := 3
|
|
KERNEL := $(KERNEL_DTB)
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | tplink-v2-header -e
|
|
IMAGE/factory.bin := tplink-v2-image -e
|
|
IMAGE/sysupgrade.bin := tplink-v2-image -s -e | append-metadata
|
|
endef
|
|
|
|
define Device/asus_rp-n53
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := Asus
|
|
DEVICE_MODEL := RP-N53
|
|
DEVICE_PACKAGES := kmod-rt2800-pci
|
|
SUPPORTED_DEVICES += rp-n53
|
|
endef
|
|
TARGET_DEVICES += asus_rp-n53
|
|
|
|
define Device/asus_rt-ac51u
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Asus
|
|
DEVICE_MODEL := RT-AC51U
|
|
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci \
|
|
kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += rt-ac51u
|
|
endef
|
|
TARGET_DEVICES += asus_rt-ac51u
|
|
|
|
define Device/asus_rt-n12p
|
|
SOC := mt7620n
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Asus
|
|
DEVICE_MODEL := RT-N11P/RT-N12+/RT-N12Eb1
|
|
SUPPORTED_DEVICES += rt-n12p
|
|
endef
|
|
TARGET_DEVICES += asus_rt-n12p
|
|
|
|
define Device/asus_rt-n14u
|
|
SOC := mt7620n
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Asus
|
|
DEVICE_MODEL := RT-N14u
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += rt-n14u
|
|
endef
|
|
TARGET_DEVICES += asus_rt-n14u
|
|
|
|
define Device/bdcom_wap2100-sk
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 15808k
|
|
DEVICE_VENDOR := BDCOM
|
|
DEVICE_MODEL := WAP2100-SK (ZTE ZXECS EBG3130)
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-mt76x2 kmod-mt76x0e \
|
|
kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += bdcom_wap2100-sk
|
|
|
|
define Device/buffalo_whr-1166d
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := WHR-1166D
|
|
DEVICE_PACKAGES := kmod-mt76x2
|
|
SUPPORTED_DEVICES += whr-1166d
|
|
endef
|
|
TARGET_DEVICES += buffalo_whr-1166d
|
|
|
|
define Device/buffalo_whr-300hp2
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := WHR-300HP2
|
|
SUPPORTED_DEVICES += whr-300hp2
|
|
endef
|
|
TARGET_DEVICES += buffalo_whr-300hp2
|
|
|
|
define Device/buffalo_whr-600d
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := WHR-600D
|
|
DEVICE_PACKAGES := kmod-rt2800-pci
|
|
SUPPORTED_DEVICES += whr-600d
|
|
endef
|
|
TARGET_DEVICES += buffalo_whr-600d
|
|
|
|
define Device/buffalo_wmr-300
|
|
SOC := mt7620n
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := Buffalo
|
|
DEVICE_MODEL := WMR-300
|
|
SUPPORTED_DEVICES += wmr-300
|
|
endef
|
|
TARGET_DEVICES += buffalo_wmr-300
|
|
|
|
define Device/comfast_cf-wr800n
|
|
SOC := mt7620n
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := Comfast
|
|
DEVICE_MODEL := CF-WR800N
|
|
SUPPORTED_DEVICES += cf-wr800n
|
|
endef
|
|
TARGET_DEVICES += comfast_cf-wr800n
|
|
|
|
define Device/dlink_dch-m225
|
|
$(Device/seama)
|
|
SOC := mt7620a
|
|
BLOCKSIZE := 4k
|
|
SEAMA_SIGNATURE := wapn22_dlink.2013gui_dap1320b
|
|
IMAGE_SIZE := 6848k
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DCH-M225
|
|
DEVICE_PACKAGES := kmod-sound-core kmod-sound-mt7620 kmod-i2c-ralink
|
|
SUPPORTED_DEVICES += dch-m225
|
|
endef
|
|
TARGET_DEVICES += dlink_dch-m225
|
|
|
|
define Device/dlink_dir-510l
|
|
$(Device/amit_jboot)
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 14208k
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-510L
|
|
DEVICE_PACKAGES += kmod-mt76x0e
|
|
DLINK_ROM_ID := DLK6E3805001
|
|
DLINK_FAMILY_MEMBER := 0x6E38
|
|
DLINK_FIRMWARE_SIZE := 0xDE0000
|
|
DLINK_IMAGE_OFFSET := 0x210000
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-510l
|
|
|
|
define Device/dlink_dir-810l
|
|
SOC := mt7620a
|
|
DEVICE_PACKAGES := kmod-mt76x0e
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DIR-810L
|
|
IMAGE_SIZE := 6720k
|
|
SUPPORTED_DEVICES += dir-810l
|
|
endef
|
|
TARGET_DEVICES += dlink_dir-810l
|
|
|
|
define Device/dlink_dwr-116-a1
|
|
$(Device/amit_jboot)
|
|
SOC := mt7620n
|
|
IMAGE_SIZE := 8064k
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DWR-116
|
|
DEVICE_VARIANT := A1/A2
|
|
DLINK_ROM_ID := DLK6E3803001
|
|
DLINK_FAMILY_MEMBER := 0x6E38
|
|
DLINK_FIRMWARE_SIZE := 0x7E0000
|
|
endef
|
|
TARGET_DEVICES += dlink_dwr-116-a1
|
|
|
|
define Device/dlink_dwr-118-a1
|
|
$(Device/amit_jboot)
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 16256k
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DWR-118
|
|
DEVICE_VARIANT := A1
|
|
DEVICE_PACKAGES += kmod-mt76x0e
|
|
DLINK_ROM_ID := DLK6E3811001
|
|
DLINK_FAMILY_MEMBER := 0x6E38
|
|
DLINK_FIRMWARE_SIZE := 0xFE0000
|
|
endef
|
|
TARGET_DEVICES += dlink_dwr-118-a1
|
|
|
|
define Device/dlink_dwr-118-a2
|
|
$(Device/amit_jboot)
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 16256k
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DWR-118
|
|
DEVICE_VARIANT := A2
|
|
DEVICE_PACKAGES += kmod-mt76x2
|
|
DLINK_ROM_ID := DLK6E3814001
|
|
DLINK_FAMILY_MEMBER := 0x6E38
|
|
DLINK_FIRMWARE_SIZE := 0xFE0000
|
|
endef
|
|
TARGET_DEVICES += dlink_dwr-118-a2
|
|
|
|
define Device/dlink_dwr-921-c1
|
|
$(Device/amit_jboot)
|
|
SOC := mt7620n
|
|
IMAGE_SIZE := 16256k
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DWR-921
|
|
DEVICE_VARIANT := C1
|
|
DLINK_ROM_ID := DLK6E2414001
|
|
DLINK_FAMILY_MEMBER := 0x6E24
|
|
DLINK_FIRMWARE_SIZE := 0xFE0000
|
|
DEVICE_PACKAGES += kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
|
|
endef
|
|
TARGET_DEVICES += dlink_dwr-921-c1
|
|
|
|
define Device/dlink_dwr-921-c3
|
|
$(Device/dlink_dwr-921-c1)
|
|
DEVICE_DTS := mt7620n_dlink_dwr-921-c1
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DWR-921
|
|
DEVICE_VARIANT := C3
|
|
DLINK_ROM_ID := DLK6E2414009
|
|
SUPPORTED_DEVICES := dlink,dwr-921-c1
|
|
endef
|
|
TARGET_DEVICES += dlink_dwr-921-c3
|
|
|
|
define Device/dlink_dwr-922-e2
|
|
$(Device/amit_jboot)
|
|
SOC := mt7620n
|
|
IMAGE_SIZE := 16256k
|
|
DEVICE_VENDOR := D-Link
|
|
DEVICE_MODEL := DWR-922
|
|
DEVICE_VARIANT := E2
|
|
DLINK_ROM_ID := DLK6E2414005
|
|
DLINK_FAMILY_MEMBER := 0x6E24
|
|
DLINK_FIRMWARE_SIZE := 0xFE0000
|
|
DEVICE_PACKAGES += kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
|
|
endef
|
|
TARGET_DEVICES += dlink_dwr-922-e2
|
|
|
|
define Device/dovado_tiny-ac
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := Dovado
|
|
DEVICE_MODEL := Tiny AC
|
|
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += tiny-ac
|
|
endef
|
|
TARGET_DEVICES += dovado_tiny-ac
|
|
|
|
define Device/edimax_br-6478ac-v2
|
|
SOC := mt7620a
|
|
DEVICE_VENDOR := Edimax
|
|
DEVICE_MODEL := BR-6478AC
|
|
DEVICE_VARIANT := V2
|
|
BLOCKSIZE := 64k
|
|
IMAGE_SIZE := 7744k
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
|
|
edimax-header -s CSYS -m RN68 -f 0x70000 -S 0x01100000 | pad-rootfs | \
|
|
append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += edimax_br-6478ac-v2
|
|
|
|
define Device/edimax_ew-7476rpc
|
|
SOC := mt7620a
|
|
DEVICE_VENDOR := Edimax
|
|
DEVICE_MODEL := EW-7476RPC
|
|
BLOCKSIZE := 4k
|
|
IMAGE_SIZE := 7744k
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
|
|
edimax-header -s CSYS -m RN79 -f 0x70000 -S 0x01100000 | pad-rootfs | \
|
|
append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-phy-realtek
|
|
endef
|
|
TARGET_DEVICES += edimax_ew-7476rpc
|
|
|
|
define Device/edimax_ew-7478ac
|
|
SOC := mt7620a
|
|
DEVICE_VENDOR := Edimax
|
|
DEVICE_MODEL := EW-7478AC
|
|
BLOCKSIZE := 4k
|
|
IMAGE_SIZE := 7744k
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
|
|
edimax-header -s CSYS -m RN70 -f 0x70000 -S 0x01100000 | pad-rootfs | \
|
|
append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-phy-realtek
|
|
endef
|
|
TARGET_DEVICES += edimax_ew-7478ac
|
|
|
|
define Device/edimax_ew-7478apc
|
|
SOC := mt7620a
|
|
DEVICE_VENDOR := Edimax
|
|
DEVICE_MODEL := EW-7478APC
|
|
BLOCKSIZE := 4k
|
|
IMAGE_SIZE := 7744k
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
|
|
edimax-header -s CSYS -m RN75 -f 0x70000 -S 0x01100000 | pad-rootfs | \
|
|
append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += edimax_ew-7478apc
|
|
|
|
define Device/elecom_wrh-300cr
|
|
SOC := mt7620n
|
|
IMAGE_SIZE := 14272k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
|
|
elecom-header
|
|
DEVICE_VENDOR := Elecom
|
|
DEVICE_MODEL := WRH-300CR
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += wrh-300cr
|
|
endef
|
|
TARGET_DEVICES += elecom_wrh-300cr
|
|
|
|
define Device/engenius_esr600
|
|
SOC := mt7620a
|
|
BLOCKSIZE := 64k
|
|
IMAGE_SIZE := 15616k
|
|
IMAGES += factory.dlf
|
|
IMAGE/factory.dlf := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
|
|
senao-header -r 0x101 -p 0x57 -t 2
|
|
DEVICE_VENDOR := EnGenius
|
|
DEVICE_MODEL := ESR600
|
|
DEVICE_PACKAGES += kmod-rt2800-pci kmod-usb-storage kmod-usb-ohci \
|
|
kmod-usb-ehci
|
|
endef
|
|
TARGET_DEVICES += engenius_esr600
|
|
|
|
define Device/fon_fon2601
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 15936k
|
|
DEVICE_VENDOR := Fon
|
|
DEVICE_MODEL := FON2601
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci
|
|
KERNEL_INITRAMFS := $$(KERNEL) | fonfxcimage
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | fonfxcimage | \
|
|
pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
endef
|
|
TARGET_DEVICES += fon_fon2601
|
|
|
|
define Device/glinet_gl-mt300a
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 15872k
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-MT300A
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += gl-mt300a
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-mt300a
|
|
|
|
define Device/glinet_gl-mt300n
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 15872k
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-MT300N
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += gl-mt300n
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-mt300n
|
|
|
|
define Device/glinet_gl-mt750
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 15872k
|
|
DEVICE_VENDOR := GL.iNet
|
|
DEVICE_MODEL := GL-MT750
|
|
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += gl-mt750
|
|
endef
|
|
TARGET_DEVICES += glinet_gl-mt750
|
|
|
|
define Device/head-weblink_hdrm200
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Head Weblink
|
|
DEVICE_MODEL := HDRM2000
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 \
|
|
uqmi kmod-usb-serial kmod-usb-serial-option
|
|
endef
|
|
TARGET_DEVICES += head-weblink_hdrm200
|
|
|
|
define Device/hiwifi_hc5661
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 15872k
|
|
DEVICE_VENDOR := HiWiFi
|
|
DEVICE_MODEL := HC5661
|
|
DEVICE_PACKAGES := kmod-sdhci-mt7620
|
|
SUPPORTED_DEVICES += hc5661
|
|
endef
|
|
TARGET_DEVICES += hiwifi_hc5661
|
|
|
|
define Device/hiwifi_hc5761
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 15872k
|
|
DEVICE_VENDOR := HiWiFi
|
|
DEVICE_MODEL := HC5761
|
|
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 \
|
|
kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += hc5761
|
|
endef
|
|
TARGET_DEVICES += hiwifi_hc5761
|
|
|
|
define Device/hiwifi_hc5861
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 15872k
|
|
DEVICE_VENDOR := HiWiFi
|
|
DEVICE_MODEL := HC5861
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 \
|
|
kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += hc5861
|
|
endef
|
|
TARGET_DEVICES += hiwifi_hc5861
|
|
|
|
define Device/hnet_c108
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := HNET
|
|
DEVICE_MODEL := C108
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620
|
|
SUPPORTED_DEVICES += c108
|
|
endef
|
|
TARGET_DEVICES += hnet_c108
|
|
|
|
define Device/iodata_wn-ac1167gr
|
|
SOC := mt7620a
|
|
DEVICE_VENDOR := I-O DATA
|
|
DEVICE_MODEL := WN-AC1167GR
|
|
IMAGE_SIZE := 6864k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
|
|
elx-header 01040016 8844A2D168B45A2D
|
|
DEVICE_PACKAGES := kmod-mt76x2
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-ac1167gr
|
|
|
|
define Device/iodata_wn-ac733gr3
|
|
SOC := mt7620a
|
|
DEVICE_VENDOR := I-O DATA
|
|
DEVICE_MODEL := WN-AC733GR3
|
|
IMAGE_SIZE := 6992k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
|
|
elx-header 01040006 8844A2D168B45A2D
|
|
DEVICE_PACKAGES := kmod-mt76x0e kmod-switch-rtl8367b
|
|
endef
|
|
TARGET_DEVICES += iodata_wn-ac733gr3
|
|
|
|
define Device/iptime_a104ns
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 8000k
|
|
UIMAGE_NAME := a104ns
|
|
DEVICE_VENDOR := ipTIME
|
|
DEVICE_MODEL := A104ns
|
|
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += iptime_a104ns
|
|
|
|
define Device/kimax_u25awf-h1
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Kimax
|
|
DEVICE_MODEL := U25AWF
|
|
DEVICE_VARIANT := H1
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-storage kmod-scsi-core \
|
|
kmod-fs-ext4 kmod-fs-vfat block-mount
|
|
SUPPORTED_DEVICES += u25awf-h1
|
|
endef
|
|
TARGET_DEVICES += kimax_u25awf-h1
|
|
|
|
define Device/kimax_u35wf
|
|
SOC := mt7620n
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Kimax
|
|
DEVICE_MODEL := U35WF
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-storage kmod-scsi-core \
|
|
kmod-fs-ext4 kmod-fs-vfat block-mount
|
|
endef
|
|
TARGET_DEVICES += kimax_u35wf
|
|
|
|
define Device/kingston_mlw221
|
|
SOC := mt7620n
|
|
IMAGE_SIZE := 15744k
|
|
DEVICE_VENDOR := Kingston
|
|
DEVICE_MODEL := MLW221
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += mlw221
|
|
endef
|
|
TARGET_DEVICES += kingston_mlw221
|
|
|
|
define Device/kingston_mlwg2
|
|
SOC := mt7620n
|
|
IMAGE_SIZE := 15744k
|
|
DEVICE_VENDOR := Kingston
|
|
DEVICE_MODEL := MLWG2
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += mlwg2
|
|
endef
|
|
TARGET_DEVICES += kingston_mlwg2
|
|
|
|
define Device/lava_lr-25g001
|
|
$(Device/amit_jboot)
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 16256k
|
|
DEVICE_VENDOR := LAVA
|
|
DEVICE_MODEL := LR-25G001
|
|
DLINK_ROM_ID := LVA6E3804001
|
|
DLINK_FAMILY_MEMBER := 0x6E38
|
|
DLINK_FIRMWARE_SIZE := 0xFE0000
|
|
DEVICE_PACKAGES += kmod-mt76x0e
|
|
endef
|
|
TARGET_DEVICES += lava_lr-25g001
|
|
|
|
define Device/lenovo_newifi-y1
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Lenovo
|
|
DEVICE_MODEL := Y1
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += y1
|
|
endef
|
|
TARGET_DEVICES += lenovo_newifi-y1
|
|
|
|
define Device/lenovo_newifi-y1s
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Lenovo
|
|
DEVICE_MODEL := Y1S
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += y1s
|
|
endef
|
|
TARGET_DEVICES += lenovo_newifi-y1s
|
|
|
|
define Device/linksys_e1700
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 7872k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
|
|
umedia-header 0x013326
|
|
DEVICE_VENDOR := Linksys
|
|
DEVICE_MODEL := E1700
|
|
SUPPORTED_DEVICES += e1700
|
|
endef
|
|
TARGET_DEVICES += linksys_e1700
|
|
|
|
define Device/microduino_microwrt
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 16128k
|
|
DEVICE_VENDOR := Microduino
|
|
DEVICE_MODEL := MicroWRT
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += microwrt
|
|
endef
|
|
TARGET_DEVICES += microduino_microwrt
|
|
|
|
define Device/netgear_ex2700
|
|
SOC := mt7620a
|
|
NETGEAR_HW_ID := 29764623+4+0+32+2x2+0
|
|
NETGEAR_BOARD_ID := EX2700
|
|
BLOCKSIZE := 4k
|
|
IMAGE_SIZE := 3776k
|
|
IMAGES += factory.bin
|
|
KERNEL := $(KERNEL_DTB) | uImage lzma | pad-offset 64k 64 | \
|
|
append-uImage-fakehdr filesystem
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
|
|
netgear-dni
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := EX2700
|
|
SUPPORTED_DEVICES += ex2700
|
|
endef
|
|
TARGET_DEVICES += netgear_ex2700
|
|
|
|
define Device/netgear_ex3700
|
|
SOC := mt7620a
|
|
NETGEAR_BOARD_ID := U12H319T00_NETGEAR
|
|
BLOCKSIZE := 4k
|
|
IMAGE_SIZE := 7744k
|
|
IMAGES += factory.chk
|
|
IMAGE/factory.chk := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
|
|
netgear-chk
|
|
DEVICE_PACKAGES := kmod-mt76x2
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := EX3700/EX3800
|
|
SUPPORTED_DEVICES += ex3700
|
|
endef
|
|
TARGET_DEVICES += netgear_ex3700
|
|
|
|
define Device/netgear_ex6130
|
|
SOC := mt7620a
|
|
NETGEAR_BOARD_ID := U12H319T50_NETGEAR
|
|
BLOCKSIZE := 4k
|
|
IMAGE_SIZE := 7744k
|
|
IMAGES += factory.chk
|
|
IMAGE/factory.chk := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
|
|
netgear-chk
|
|
DEVICE_PACKAGES := kmod-mt76x2
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := EX6130
|
|
endef
|
|
TARGET_DEVICES += netgear_ex6130
|
|
|
|
define Device/netgear_wn3000rp-v3
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 7872k
|
|
NETGEAR_HW_ID := 29764836+8+0+32+2x2+0
|
|
NETGEAR_BOARD_ID := WN3000RPv3
|
|
BLOCKSIZE := 4k
|
|
IMAGES += factory.bin
|
|
KERNEL := $(KERNEL_DTB) | uImage lzma | pad-offset 64k 64 | \
|
|
append-uImage-fakehdr filesystem
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
|
|
netgear-dni
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := WN3000RP
|
|
DEVICE_VARIANT := v3
|
|
SUPPORTED_DEVICES += wn3000rpv3
|
|
endef
|
|
TARGET_DEVICES += netgear_wn3000rp-v3
|
|
|
|
define Device/nexx_wt3020-4m
|
|
SOC := mt7620n
|
|
BLOCKSIZE := 4k
|
|
IMAGE_SIZE := 3776k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
|
|
poray-header -B WT3020 -F 4M
|
|
DEVICE_VENDOR := Nexx
|
|
DEVICE_MODEL := WT3020
|
|
DEVICE_VARIANT := 4M
|
|
SUPPORTED_DEVICES += wt3020 wt3020-4M
|
|
endef
|
|
TARGET_DEVICES += nexx_wt3020-4m
|
|
|
|
define Device/nexx_wt3020-8m
|
|
SOC := mt7620n
|
|
IMAGE_SIZE := 7872k
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
|
|
poray-header -B WT3020 -F 8M
|
|
DEVICE_VENDOR := Nexx
|
|
DEVICE_MODEL := WT3020
|
|
DEVICE_VARIANT := 8M
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += wt3020 wt3020-8M
|
|
endef
|
|
TARGET_DEVICES += nexx_wt3020-8m
|
|
|
|
define Device/ohyeah_oy-0001
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Oh Yeah
|
|
DEVICE_MODEL := OY-0001
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += oy-0001
|
|
endef
|
|
TARGET_DEVICES += ohyeah_oy-0001
|
|
|
|
define Device/phicomm_k2g
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 7552k
|
|
DEVICE_VENDOR := Phicomm
|
|
DEVICE_MODEL := K2G
|
|
DEVICE_PACKAGES := kmod-mt76x2
|
|
endef
|
|
TARGET_DEVICES += phicomm_k2g
|
|
|
|
define Device/phicomm_psg1208
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := Phicomm
|
|
DEVICE_MODEL := PSG1208
|
|
DEVICE_PACKAGES := kmod-mt76x2
|
|
SUPPORTED_DEVICES += psg1208
|
|
endef
|
|
TARGET_DEVICES += phicomm_psg1208
|
|
|
|
define Device/phicomm_psg1218a
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := Phicomm
|
|
DEVICE_MODEL := PSG1218
|
|
DEVICE_VARIANT:= Ax
|
|
DEVICE_PACKAGES := kmod-mt76x2
|
|
SUPPORTED_DEVICES += psg1218 psg1218a
|
|
endef
|
|
TARGET_DEVICES += phicomm_psg1218a
|
|
|
|
define Device/phicomm_psg1218b
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := Phicomm
|
|
DEVICE_MODEL := PSG1218
|
|
DEVICE_VARIANT := Bx
|
|
DEVICE_PACKAGES := kmod-mt76x2
|
|
SUPPORTED_DEVICES += psg1218 psg1218b
|
|
endef
|
|
TARGET_DEVICES += phicomm_psg1218b
|
|
|
|
define Device/planex_cs-qr10
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := Planex
|
|
DEVICE_MODEL := CS-QR10
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sound-core \
|
|
kmod-sound-mt7620 kmod-i2c-ralink kmod-sdhci-mt7620
|
|
SUPPORTED_DEVICES += cs-qr10
|
|
endef
|
|
TARGET_DEVICES += planex_cs-qr10
|
|
|
|
define Device/planex_db-wrt01
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := Planex
|
|
DEVICE_MODEL := DB-WRT01
|
|
SUPPORTED_DEVICES += db-wrt01
|
|
endef
|
|
TARGET_DEVICES += planex_db-wrt01
|
|
|
|
define Device/planex_mzk-750dhp
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := Planex
|
|
DEVICE_MODEL := MZK-750DHP
|
|
DEVICE_PACKAGES := kmod-mt76x0e
|
|
SUPPORTED_DEVICES += mzk-750dhp
|
|
endef
|
|
TARGET_DEVICES += planex_mzk-750dhp
|
|
|
|
define Device/planex_mzk-ex300np
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 7360k
|
|
DEVICE_VENDOR := Planex
|
|
DEVICE_MODEL := MZK-EX300NP
|
|
SUPPORTED_DEVICES += mzk-ex300np
|
|
endef
|
|
TARGET_DEVICES += planex_mzk-ex300np
|
|
|
|
define Device/planex_mzk-ex750np
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 7360k
|
|
DEVICE_VENDOR := Planex
|
|
DEVICE_MODEL := MZK-EX750NP
|
|
DEVICE_PACKAGES := kmod-mt76x2
|
|
SUPPORTED_DEVICES += mzk-ex750np
|
|
endef
|
|
TARGET_DEVICES += planex_mzk-ex750np
|
|
|
|
define Device/ralink_mt7620a-evb
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := MediaTek
|
|
DEVICE_MODEL := MT7620a EVB
|
|
endef
|
|
TARGET_DEVICES += ralink_mt7620a-evb
|
|
|
|
define Device/ralink_mt7620a-mt7530-evb
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := MediaTek
|
|
DEVICE_MODEL := MT7620a + MT7530 EVB
|
|
SUPPORTED_DEVICES += mt7620a_mt7530
|
|
endef
|
|
TARGET_DEVICES += ralink_mt7620a-mt7530-evb
|
|
|
|
define Device/ralink_mt7620a-mt7610e-evb
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := MediaTek
|
|
DEVICE_MODEL := MT7620a + MT7610e EVB
|
|
DEVICE_PACKAGES := kmod-mt76x0e
|
|
SUPPORTED_DEVICES += mt7620a_mt7610e
|
|
endef
|
|
TARGET_DEVICES += ralink_mt7620a-mt7610e-evb
|
|
|
|
define Device/ralink_mt7620a-v22sg-evb
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 130560k
|
|
DEVICE_VENDOR := MediaTek
|
|
DEVICE_MODEL := MT7620a V22SG
|
|
SUPPORTED_DEVICES += mt7620a_v22sg
|
|
endef
|
|
TARGET_DEVICES += ralink_mt7620a-v22sg-evb
|
|
|
|
define Device/ravpower_wd03
|
|
SOC := mt7620n
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := Ravpower
|
|
DEVICE_MODEL := WD03
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
endef
|
|
TARGET_DEVICES += ravpower_wd03
|
|
|
|
define Device/sanlinking_d240
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Sanlinking Technologies
|
|
DEVICE_MODEL := D240
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620
|
|
SUPPORTED_DEVICES += d240
|
|
endef
|
|
TARGET_DEVICES += sanlinking_d240
|
|
|
|
define Device/sercomm_na930
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 20480k
|
|
DEVICE_VENDOR := Sercomm
|
|
DEVICE_MODEL := NA930
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += na930
|
|
endef
|
|
TARGET_DEVICES += sercomm_na930
|
|
|
|
define Device/tplink_archer-c20i
|
|
$(Device/Archer)
|
|
IMAGE_SIZE := 7808k
|
|
TPLINK_FLASHLAYOUT := 8Mmtk
|
|
TPLINK_HWID := 0xc2000001
|
|
TPLINK_HWREV := 58
|
|
IMAGES += factory.bin
|
|
DEVICE_PACKAGES := kmod-mt76x0e
|
|
DEVICE_MODEL := Archer C20i
|
|
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += c20i
|
|
endef
|
|
TARGET_DEVICES += tplink_archer-c20i
|
|
|
|
define Device/tplink_archer-c20-v1
|
|
$(Device/Archer)
|
|
IMAGE_SIZE := 7808k
|
|
SUPPORTED_DEVICES += tplink,c20-v1
|
|
TPLINK_FLASHLAYOUT := 8Mmtk
|
|
TPLINK_HWID := 0xc2000001
|
|
TPLINK_HWREV := 0x44
|
|
TPLINK_HWREVADD := 0x1
|
|
IMAGES += factory.bin
|
|
DEVICE_MODEL := Archer C20
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci \
|
|
kmod-usb-ledtrig-usbport
|
|
endef
|
|
TARGET_DEVICES += tplink_archer-c20-v1
|
|
|
|
define Device/tplink_archer-c2-v1
|
|
$(Device/Archer)
|
|
IMAGE_SIZE := 7808k
|
|
SUPPORTED_DEVICES += tplink,c2-v1
|
|
TPLINK_FLASHLAYOUT := 8Mmtk
|
|
TPLINK_HWID := 0xc7500001
|
|
TPLINK_HWREV := 50
|
|
IMAGES += factory.bin
|
|
DEVICE_MODEL := Archer C2
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-ohci \
|
|
kmod-usb-ledtrig-usbport kmod-switch-rtl8366-smi kmod-switch-rtl8367b
|
|
endef
|
|
TARGET_DEVICES += tplink_archer-c2-v1
|
|
|
|
define Device/tplink_archer-c50-v1
|
|
$(Device/Archer)
|
|
IMAGE_SIZE := 7808k
|
|
TPLINK_FLASHLAYOUT := 8Mmtk
|
|
TPLINK_HWID := 0xc7500001
|
|
TPLINK_HWREV := 69
|
|
IMAGES += factory-us.bin factory-eu.bin
|
|
IMAGE/factory-us.bin := tplink-v2-image -e -w 0
|
|
IMAGE/factory-eu.bin := tplink-v2-image -e -w 2
|
|
DEVICE_MODEL := Archer C50
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += c50
|
|
endef
|
|
TARGET_DEVICES += tplink_archer-c50-v1
|
|
|
|
define Device/tplink_archer-mr200
|
|
$(Device/Archer)
|
|
IMAGE_SIZE := 7872k
|
|
TPLINK_FLASHLAYOUT := 8MLmtk
|
|
TPLINK_HWID := 0xd7500001
|
|
TPLINK_HWREV := 0x4a
|
|
DEVICE_PACKAGES := kmod-mt76x0e kmod-usb2 kmod-usb-net kmod-usb-net-rndis \
|
|
kmod-usb-serial kmod-usb-serial-option adb-enablemodem
|
|
DEVICE_MODEL := Archer MR200
|
|
SUPPORTED_DEVICES += mr200
|
|
endef
|
|
TARGET_DEVICES += tplink_archer-mr200
|
|
|
|
define Device/tplink_re200-v1
|
|
SOC := mt7620a
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := RE200
|
|
DEVICE_VARIANT := v1
|
|
DEVICE_PACKAGES := kmod-mt76x0e
|
|
IMAGES += factory.bin
|
|
IMAGE/sysupgrade.bin := mktplinkfw sysupgrade -e -O
|
|
IMAGE/factory.bin := mktplinkfw factory -e -O
|
|
IMAGE_SIZE := 7936k
|
|
KERNEL := $(KERNEL_DTB)
|
|
KERNEL_INITRAMFS := $(KERNEL_DTB) | tplink-v1-header -e -O
|
|
TPLINK_HWID := 0x02000001
|
|
TPLINK_HWREV := 0x1
|
|
TPLINK_HEADER_VERSION := 1
|
|
TPLINK_FLASHLAYOUT := 8Mmtk
|
|
endef
|
|
TARGET_DEVICES += tplink_re200-v1
|
|
|
|
define Device/vonets_var11n-300
|
|
SOC := mt7620n
|
|
IMAGE_SIZE := 3776k
|
|
BLOCKSIZE := 4k
|
|
DEVICE_VENDOR := Vonets
|
|
DEVICE_MODEL := VAR11N-300
|
|
endef
|
|
TARGET_DEVICES += vonets_var11n-300
|
|
|
|
define Device/wrtnode_wrtnode
|
|
SOC := mt7620n
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := WRTNode
|
|
DEVICE_MODEL := WRTNode
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += wrtnode
|
|
endef
|
|
TARGET_DEVICES += wrtnode_wrtnode
|
|
|
|
define Device/xiaomi_miwifi-mini
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 15872k
|
|
DEVICE_VENDOR := Xiaomi
|
|
DEVICE_MODEL := MiWiFi Mini
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += miwifi-mini
|
|
endef
|
|
TARGET_DEVICES += xiaomi_miwifi-mini
|
|
|
|
define Device/youku_yk1
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 32448k
|
|
DEVICE_VENDOR := YOUKU
|
|
DEVICE_MODEL := YK1
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 \
|
|
kmod-usb-ledtrig-usbport
|
|
SUPPORTED_DEVICES += youku-yk1
|
|
endef
|
|
TARGET_DEVICES += youku_yk1
|
|
|
|
define Device/yukai_bocco
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := YUKAI Engineering
|
|
DEVICE_MODEL := BOCCO
|
|
DEVICE_PACKAGES := kmod-sound-core kmod-sound-mt7620 kmod-i2c-ralink
|
|
SUPPORTED_DEVICES += bocco
|
|
endef
|
|
TARGET_DEVICES += yukai_bocco
|
|
|
|
define Device/zbtlink_zbt-ape522ii
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 15872k
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-APE522II
|
|
DEVICE_PACKAGES := kmod-mt76x2
|
|
SUPPORTED_DEVICES += zbt-ape522ii
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-ape522ii
|
|
|
|
define Device/zbtlink_zbt-cpe102
|
|
SOC := mt7620n
|
|
IMAGE_SIZE := 7552k
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-CPE102
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += zbt-cpe102
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-cpe102
|
|
|
|
define Device/zbtlink_zbt-wa05
|
|
SOC := mt7620n
|
|
IMAGE_SIZE := 7552k
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-WA05
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += zbt-wa05
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-wa05
|
|
|
|
define Device/zbtlink_zbt-we1026-5g-16m
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-WE1026-5G
|
|
DEVICE_VARIANT := 16M
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620
|
|
SUPPORTED_DEVICES += we1026-5g-16m zbtlink,we1026-5g-16m
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-we1026-5g-16m
|
|
|
|
define Device/zbtlink_zbt-we1026-h-32m
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 32448k
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-WE1026-H
|
|
DEVICE_VARIANT := 32M
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 \
|
|
kmod-ledtrig-netdev
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-we1026-h-32m
|
|
|
|
define Device/zbtlink_zbt-we2026
|
|
SOC := mt7620n
|
|
IMAGE_SIZE := 7552k
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-WE2026
|
|
SUPPORTED_DEVICES += zbt-we2026
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-we2026
|
|
|
|
define Device/zbtlink_zbt-we826-16m
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-WE826
|
|
DEVICE_VARIANT := 16M
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620
|
|
SUPPORTED_DEVICES += zbt-we826 zbt-we826-16M
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-we826-16m
|
|
|
|
define Device/zbtlink_zbt-we826-32m
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 32448k
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-WE826
|
|
DEVICE_VARIANT := 32M
|
|
DEVICE_PACKAGES := kmod-mt76x2 kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620
|
|
SUPPORTED_DEVICES += zbt-we826-32M
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-we826-32m
|
|
|
|
define Device/zbtlink_zbt-we826-e
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 32448k
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-WE826-E
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 uqmi \
|
|
kmod-usb-serial kmod-usb-serial-option
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-we826-e
|
|
|
|
define Device/zbtlink_zbt-wr8305rt
|
|
SOC := mt7620n
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := Zbtlink
|
|
DEVICE_MODEL := ZBT-WR8305RT
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += zbt-wr8305rt
|
|
endef
|
|
TARGET_DEVICES += zbtlink_zbt-wr8305rt
|
|
|
|
define Device/zte_q7
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := ZTE
|
|
DEVICE_MODEL := Q7
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
|
|
SUPPORTED_DEVICES += zte-q7
|
|
endef
|
|
TARGET_DEVICES += zte_q7
|
|
|
|
define Device/zyxel_keenetic-omni
|
|
SOC := mt7620n
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := Keenetic Omni
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | pad-to 64k | \
|
|
check-size $$$$(IMAGE_SIZE) | zyimage -d 4882 -v "ZyXEL Keenetic Omni"
|
|
SUPPORTED_DEVICES += kn_rc
|
|
endef
|
|
TARGET_DEVICES += zyxel_keenetic-omni
|
|
|
|
define Device/zyxel_keenetic-omni-ii
|
|
SOC := mt7620n
|
|
IMAGE_SIZE := 7872k
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := Keenetic Omni II
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | pad-to 64k | \
|
|
check-size $$$$(IMAGE_SIZE) | \
|
|
zyimage -d 2102034 -v "ZyXEL Keenetic Omni II"
|
|
SUPPORTED_DEVICES += kn_rf
|
|
endef
|
|
TARGET_DEVICES += zyxel_keenetic-omni-ii
|
|
|
|
define Device/zyxel_keenetic-viva
|
|
SOC := mt7620a
|
|
IMAGE_SIZE := 16064k
|
|
DEVICE_VENDOR := ZyXEL
|
|
DEVICE_MODEL := Keenetic Viva
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport \
|
|
kmod-switch-rtl8366-smi kmod-switch-rtl8367b
|
|
IMAGES += factory.bin
|
|
IMAGE/factory.bin := $$(sysupgrade_bin) | pad-to 64k | \
|
|
check-size $$$$(IMAGE_SIZE) | zyimage -d 8997 -v "ZyXEL Keenetic Viva"
|
|
SUPPORTED_DEVICES += kng_rc
|
|
endef
|
|
TARGET_DEVICES += zyxel_keenetic-viva
|