openwrt/target/linux/ramips/dts/PBR-M1.dts
Alex Maclean 6031ab345d ramips: move partitions into partition table node
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Alex Maclean <monkeh@monkeh.net>
2018-08-04 08:39:35 +02:00

183 lines
2.9 KiB
Plaintext

/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "d-team,pbr-m1", "mediatek,mt7621-soc";
model = "PBR-M1";
aliases {
led-status = &led_power;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200";
};
palmbus: palmbus@1E000000 {
i2c: i2c@900 {
status = "okay";
pcf8563: rtc@51 {
status = "okay";
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
};
gpio-leds {
compatible = "gpio-leds";
led_power: power {
label = "pbr-m1:blue:power";
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
};
sys {
label = "pbr-m1:blue:sys";
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
};
internet {
label = "pbr-m1:blue:internet";
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "pbr-m1:blue:wlan2g";
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
};
wlan5g {
label = "pbr-m1:blue:wlan5g";
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
power_usb2 {
gpio-export,name = "power_usb2";
gpio-export,output = <1>;
gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
};
power_usb3 {
gpio-export,name = "power_usb3";
gpio-export,output = <1>;
gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
};
power_sata {
gpio-export,name = "power_sata";
gpio-export,output = <1>;
gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
};
};
beeper: beeper {
compatible = "gpio-beeper";
gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
};
};
&sdhci {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&sdhci_pins>;
};
&spi0 {
status = "okay";
m25p80@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&pcie1 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0000>;
};
};
&ethernet {
mtd-mac-address = <&factory 0xe000>;
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "wdt", "rgmii2", "jtag", "mdio";
ralink,function = "gpio";
};
};
};